2018-04-26 19:04:32 +02:00
|
|
|
# WAN Monitor & Failover Connection Manager
|
|
|
|
|
|
2018-04-26 19:15:24 +02:00
|
|
|
The wanmonitor package is an agent script that makes Multi-WAN configuration simple,
|
|
|
|
|
easy to use and manageable. It comes complete with failover setup supporting many
|
|
|
|
|
types of internet connections, including PPPoE and mobile connections. The uci
|
|
|
|
|
configuration file /etc/config/wanmonitor is provided as part of the wanmonitorpackage.
|
|
|
|
|
|
|
|
|
|
The WanMonitor provides the following capabilities:
|
|
|
|
|
* provides outbound WAN traffic failover connection setup
|
|
|
|
|
* monitors primary link by checking interface status and repeated ping tests
|
|
|
|
|
* automatically routes outbound traffic to secondary WAN interface if primary is down
|
|
|
|
|
* automatically routes outbound traffic back to primary interface when it is available again
|
|
|
|
|
* easy to use and manageable configuration via single file
|
|
|
|
|
* up to 2 physical interfaces for easy load-balancing setups
|
|
|
|
|
|
2018-04-26 19:04:32 +02:00
|
|
|
|
|
|
|
|
# Configuration
|
2018-04-23 11:19:34 +02:00
|
|
|
|
|
|
|
|
All configuration is done in /etc/config/wanmonitor file. Options available:
|
|
|
|
|
* check_host - IP address of remote host used to check Internet connectivity
|
|
|
|
|
* interval - Number of seconds to wait between checks
|
2018-04-23 17:40:01 +02:00
|
|
|
* sleep - number of seconds to wait for slow links during startup
|
2018-04-23 11:19:34 +02:00
|
|
|
* wan_primary - Primary WAN interface name to use
|
|
|
|
|
* wan_secondary - Secondary WAN interface name to use
|
|
|
|
|
|
2018-04-26 19:04:32 +02:00
|
|
|
What is more it can make a use of WAN routes metrics set in /etc/config/network,
|
|
|
|
|
thus allowing to use PPPoE to work correctly. When PPPoE connection is established,
|
|
|
|
|
it automatically adds a route with proper (higher) priority and this connection
|
|
|
|
|
is being used as default. After a while, when WanMonitor notices primary connection
|
|
|
|
|
is again available, it removes a route for secondary WAN connection (eg. in order to
|
|
|
|
|
save mobile traffic).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
# Sample configuration
|
|
|
|
|
|
|
|
|
|
/etc/config/network:
|
|
|
|
|
<pre>config interface 'wan1'
|
|
|
|
|
option ifname 'eth0'
|
|
|
|
|
option metric '0'
|
|
|
|
|
option proto 'pppoe'
|
|
|
|
|
option username 'login'
|
|
|
|
|
option password 'password'
|
|
|
|
|
option service 'PPPoE'
|
|
|
|
|
|
|
|
|
|
config interface 'wan2'
|
|
|
|
|
option ifname 'eth1'
|
|
|
|
|
option proto 'dhcp'
|
|
|
|
|
option metric '5'
|
|
|
|
|
option defaultroute '0'
|
|
|
|
|
option service 'LTE'</pre>
|
|
|
|
|
|
|
|
|
|
/etc/config/wanmonitor:
|
|
|
|
|
<pre>config wanmonitor
|
|
|
|
|
option check_host '8.8.8.8'
|
|
|
|
|
option interval '5'
|
|
|
|
|
option sleep '5'
|
|
|
|
|
option wan_primary 'wan1'
|
|
|
|
|
option wan_secondary 'wan2'</pre>
|
