configure.ps1: Fix path handling and improve reliability

- Use $PSScriptRoot for reliable source directory detection
- Use Join-Path for proper path construction
- Validate BUILD_TYPE against Debug/Release
- Fix CMake argument quoting
- Use Write-Error for error messages

CMakeLists.txt

@@ -60,11 +60,10 @@ file(RELATIVE_PATH _PATH_PREFIX ${EXECTOS_BINARY_DIR} ${EXECTOS_SOURCE_DIR})
 add_compiler_flags(-D__RELFILE__="&__FILE__[__FILE__[0] == '.' ? sizeof \\\"${_PATH_PREFIX}\\\" - 1 : sizeof XTOS_SOURCE_DIR]")
 
 # Set the virtual disk image size (in MiB)
-set_disk_image_size(32)
+set_disk_image_size(48)
 
 # Build all subprojects
-add_subdirectory(bootdata)
+add_subdirectory(boot)
 add_subdirectory(drivers)
 add_subdirectory(sdk)
-add_subdirectory(xtldr)
 add_subdirectory(xtoskrnl)

CONTRIBUTING.md

@@ -9,8 +9,7 @@ porting drivers, fixing bugs, writing tests, creating documentation, or helping
 love the help.
 
 ## Wish List
-If you are looking for a way to contribute, but you are not sure where to start, check our [IDEAS](IDEAS.md) and
-[KNOWN ISSUES](KNOWN_ISSUES.md) pages for suggestions. We try to keep them up to date. You can also check a list of
+If you are looking for a way to contribute, but you are not sure where to start, check our list of
 [open issues](https://git.codingworkshop.eu.org/xt-sys/exectos/issues). If you find interesting task and you are serious
 about tackling one, feel free to contact us. We will be able to provide a more detailed information and suggestions
 towards getting started.

IDEAS.md

@@ -1,9 +0,0 @@
-## ExectOS Ideas
-This is a list of ideas that migh but not must be realized.
-
-### XTOSKRNL
- - [ ] Implement mechanism for detecting CPU features and checking hardware requirements. If CPU does not meet
-       requirements, it should cause a kernel panic before any non-supported instruction is being used.
- - [ ] Finish framebuffer and terminal implementation. Initialization code is already prepared as well as routines for
-       clearing the screen and drawing single points. Terminal should be instantiable (should be able to create many
-       terminals and switch between them) and work on top of FB. It should define ANSI colors and scrollback buffer.

KNOWN_ISSUES.md

@@ -1,6 +0,0 @@
-## ExectOS Known Issues
-This is a list of well known bugs that exists in all master branch builds.
-
-### XTLDR
- - [ ] EFI Runtime Services are not mapped properly into higher half. They are mapped itself, but all pointers inside
-       that structure point to some physical address that is unavailable after paging is enabled.

README.md

@@ -58,15 +58,17 @@ design, it requires a modern EFI enabled hardware. It is not possible currently
 
 # Source structure
 | Directory        | Description                                                  |
-|-------------|----------------------------------------------------------|
-| bootdata    | default configuration and data needed to boot XTOS       |
+|------------------|--------------------------------------------------------------|
+| boot/bootdata    | default configuration and data needed to boot XTOS           |
+| boot/bootsect    | boot sector code (MBR & VBR) initializing the boot process   |
+| boot/xtldr       | XTOS boot loader source code                                 |
 | drivers          | XT native drivers source code                                |
-| sdk/cmake   | Host toolchain configuration and build-related functions |
+| sdk/cmake        | host toolchain configuration and build-related functions     |
+| sdk/firmware     | firmware enabling XTOS to boot on virtual machines           |
 | sdk/xtdk         | XT Software Development Kit headers                          |
 | services         | integral subsystems services source code                     |
 | subsystems       | environment subsystems source code                           |
 | xtoskrnl         | XTOS kernel source code                                      |
-| xtldr       | XTOS boot loader source code                             |
 
 # Build
 XTOS can only be built using [XTchain](https://git.codingworkshop.eu.org/xt-sys/xtchain), a dedicated toolchain designed

boot/CMakeLists.txt

@@ -0,0 +1,3 @@
+add_subdirectory(bootdata)
+add_subdirectory(bootsect)
+add_subdirectory(xtldr)

boot/bootsect/CMakeLists.txt

@@ -0,0 +1,6 @@
+# XT Boot Sector
+PROJECT(BOOTSECT)
+
+# Compile boot sectors
+compile_bootsector(mbrboot ${BOOTSECT_SOURCE_DIR}/mbrboot.S 0x7C00 Start)
+compile_bootsector(espboot ${BOOTSECT_SOURCE_DIR}/espboot.S 0x7C00 Start)

boot/bootsect/espboot.S

@@ -0,0 +1,276 @@
+/**
+ * PROJECT:         ExectOS
+ * COPYRIGHT:       See COPYING.md in the top level directory
+ * FILE:            boot/bootsect/espboot.S
+ * DESCRIPTION:     XT Boot Loader ESP boot code (FAT32)
+ * DEVELOPERS:      Aiken Harris <harraiken91@gmail.com>
+ */
+
+.text
+.code16
+
+
+.global Start
+Start:
+    /* Jump to the real start to omit the BPB (BIOS Parameter Block) */
+    jmp RealStart
+    nop
+
+/* BIOS Parameter Block */
+OsName:
+    .ascii "XTOS "
+OsVersion:
+    .ascii "1.0"
+BytesPerSector:
+    .word 512
+SectorsPerCluster:
+    .byte 2
+ReservedSectors:
+    .word 8
+FatCopies:
+    .byte 1
+RootDirEntries:
+    .word 1024
+TotalSectors:
+    .word 0
+MediaType:
+    .byte 0xF8
+SectorsPerFat:
+    .word 0
+SectorsPerTrack:
+    .word 17
+NumberOfHeads:
+    .word 0
+HiddenSectors:
+    .long 0
+TotalBigSectors:
+    .long 0x200000
+BigSectorsPerFat:
+    .long 0x1FE0
+ExtendedFlags:
+    .word 0
+FsVersion:
+    .word 0
+RootDirStartCluster:
+    .long 0
+FSInfoSector:
+    .word 0
+BackupBootSector:
+    .word 6
+Reserved:
+    .fill 12, 1, 0
+DriveNumber:
+    .byte 0x80
+CurrentHead:
+    .byte 0
+Signature:
+    .byte 0x29
+SerialNumber:
+    .long 0
+VolumeLabel:
+    .ascii "NO NAME    "
+FileSystem:
+    .ascii "FAT32   "
+
+RealStart:
+    /* Set segments and stack */
+    cli
+    cld
+    xorw %ax, %ax
+    movw %ax, %ds
+    movw %ax, %es
+    movw %ax, %ss
+    movw $0x7C00, %bp
+    leaw -16(%bp), %sp
+    sti
+
+    /* Get drive number */
+    cmpb $0xFF, DriveNumber - Start(%bp)
+    jne GetDriveParameters
+    movb %dl, DriveNumber - Start(%bp)
+
+GetDriveParameters:
+    /* Get drive parameters from the BIOS */
+    movb DriveNumber - Start(%bp), %dl
+    movb $0x08, %ah
+    movb $0x00, %al
+    int $0x13
+    jnc GetDriveSize
+    movw $0xFFFF, %cx
+    movb %cl, %dh
+
+GetDriveSize:
+    /* Get drive size from the BIOS */
+    movzbl %dh, %eax
+    incw %ax
+    movzbl %cl, %edx
+    andb $0x3F, %dl
+    mulw %dx
+    xchgb %cl, %ch
+    shrb $0x06, %ch
+    incw %cx
+    movzwl %cx, %ecx
+    mull %ecx
+    movl %eax, %edi
+
+VerifyBiosParameterBlock:
+    /* Verify the FAT32 BPB */
+    cmpw $0x00, SectorsPerFat - Start(%bp)
+    jne FsError
+    cmpw $0x00, FsVersion - Start(%bp)
+    ja FsError
+
+ReadExtraCode:
+    /* Read second VBR sector with extra boot code */
+    movl HiddenSectors - Start(%bp), %eax
+    addl $0x02, %eax
+    movw $0x01, %cx
+    xorw %bx, %bx
+    movw %bx, %es
+    movw $0x7E00, %bx
+    call ReadSectors
+    jmp StartSectors
+
+ReadSectors:
+    /* Check for extended BIOS functions and use it only if available */
+    pushw %es
+    pushal
+    movb $0x41, %ah
+    movw $0x55AA, %bx
+    movb DriveNumber - Start(%bp), %dl
+    int $0x13
+    jc ReadCHS
+    cmpw $0xAA55, %bx
+    jne ReadCHS
+    testb $0x01, %cl
+    jz ReadCHS
+
+    /* Verify drive size and determine whether to use CHS or LBA */
+    cmpl %edi, %eax
+    jnb ReadLBA
+
+ReadCHS:
+    /* Read sectors using CHS */
+    pushw %cx
+    pushal
+    xorl %edx, %edx
+    movzwl SectorsPerTrack - Start(%bp), %ecx
+    divl %ecx
+    incb %dl
+    movb %dl, %cl
+    movl %eax, %edx
+    shrl $0x10, %edx
+    divw NumberOfHeads - Start(%bp)
+    movb %dl, %dh
+    movb DriveNumber - Start(%bp), %dl
+    movb %al, %ch
+    rorb $0x01, %ah
+    rorb $0x01, %ah
+    orb %ah, %cl
+    movw $0x0201, %ax
+    int $0x13
+    popal
+    popw %cx
+    jc DiskError
+    incl %eax
+    movw %es, %dx
+    addw $0x20, %dx
+    movw %dx, %es
+    loop ReadCHS
+    popw %es
+    ret
+
+ReadLBA:
+    /* Prepare DAP packet and read sectors using LBA */
+    popal
+    pushw %cx
+    pushal
+    pushw $0x00
+    pushw $0x00
+    pushl %eax
+    pushw %es
+    pushw %bx
+    pushw %cx
+    pushw $0x10
+    movw %sp, %si
+    movb DriveNumber - Start(%bp), %dl
+    movb $0x42, %ah
+    int $0x13
+    jc DiskError
+    addw $0x10, %sp
+    popal
+    popw %si
+    pushw %bx
+    movzwl %si, %ebx
+    addl %ebx, %eax
+    shll $0x05, %ebx
+    movw %es, %dx
+    addw %bx, %dx
+    movw %dx, %es
+    popw %bx
+    subw %si, %cx
+    jnz ReadLBA
+    popw %es
+    ret
+
+DiskError:
+    /* Display disk error message and reboot */
+    movw $msgDiskError, %si
+    call Print
+    jmp Reboot
+
+FsError:
+    /* Display FS error message and reboot */
+    movw $msgFsError, %si
+    call Print
+    jmp Reboot
+
+Print:
+    /* Simple routine to print messages */
+    lodsb
+    orb     %al, %al
+    jz      DonePrint
+    movb    $0x0E, %ah
+    movw    $0x07, %bx
+    int     $0x10
+    jmp     Print
+DonePrint:
+    retw
+
+Reboot:
+    /* Display a message, wait for a key press and reboot */
+    movw $msgAnyKey, %si
+    call Print
+    xorw %ax, %ax
+    int $0x16
+    int $0x19
+
+msgAnyKey:
+    .ascii "Press any key to restart\r\n"
+
+msgDiskError:
+    .ascii "Disk error\r\n"
+
+msgFsError:
+    .ascii "File system error\r\n"
+
+/* Fill the rest of the VBR with zeros and add VBR signature at the end */
+.fill (510 - (. - Start)), 1, 0
+.word 0xAA55
+
+
+StartSectors:
+    /* Print message */
+    movw $msgUnavailable, %si
+    call Print
+
+    /* Wait for key press and reboot */
+    xorw %ax, %ax
+    int $0x16
+    int $0x19
+
+msgUnavailable:
+    .ascii "XTLDR requires EFI-based system!\r\nPress any key to restart\r\n"
+
+/* Fill the rest of the extra VBR with zeros */
+.fill (1024 - (. - Start)), 1, 0

boot/bootsect/mbrboot.S

@@ -0,0 +1,153 @@
+/**
+ * PROJECT:         ExectOS
+ * COPYRIGHT:       See COPYING.md in the top level directory
+ * FILE:            boot/bootsect/amd64/mbrboot.S
+ * DESCRIPTION:     XT Boot Loader MBR boot code
+ * DEVELOPERS:      Rafal Kupiec <belliash@codingworkshop.eu.org>
+ */
+
+.text
+.code16
+
+
+.global Start
+Start:
+    /* Set segments and stack */
+    cli
+    cld
+    xorw %ax, %ax
+    movw %ax, %ds
+    movw %ax, %es
+    movw %ax, %ss
+    movw $0x7C00, %bp
+    leaw -16(%bp), %sp
+    sti
+
+    /* Relocate MBR to 1FE0:7C00 */
+    movw $0x1FE0, %ax
+    movw %ax, %es
+    movw %bp, %si
+    movw %bp, %di
+    movw $256, %cx
+    rep movsw
+
+    /* Jump to the relocated MBR code */
+    jmp $0x1FE0, $RealStart
+
+RealStart:
+    /* Set segments */
+    movw %ax, %ds
+    movw %ax, %es
+    movw %ax, %ss
+
+    /* Print welcome message */
+    leaw msgXtosBoot, %si
+    call Print
+
+    /* Get BIOS boot drive and partition table offset */
+    lea 0x1BE(%bp), %si
+    movb %dl, .BootDrive
+    xorw %cx, %cx
+
+FindActivePartition:
+    /* Look for active partition */
+    movb (%si), %al
+    cmpb $0x80, %al
+    je PartitionFound
+    addw $16, %si
+    incw %cx
+    cmpw $4, %cx
+    jne FindActivePartition
+    jmp PartitionNotFound
+
+PartitionFound:
+    /* Save LBA start */
+    movl 8(%si), %eax
+    movl %eax, .LbaStart
+
+    /* Prepare Disk Address Packet (DAP) */
+    lea .Dap, %si
+    movb $0x10, 0(%si)
+    movb $0x00, 1(%si)
+    movw $1, 2(%si)
+    movw $0x7C00, 4(%si)
+    movw $0x0000, 6(%si)
+    movl .LbaStart, %eax
+    movl %eax, 8(%si)
+
+    /* Read Volume Boot Record (VBR) */
+    movb $0x42, %ah
+    movb .BootDrive, %dl
+    int $0x13
+    jc VbrReadFail
+
+    /* Verify VBR signature */
+    cmpw $0xAA55, (0x7C00 + 0x01FE)
+    jne InvalidSignature
+
+    /* Jump to the VBR code */
+    jmp $0x0000, $0x7C00
+
+InvalidSignature:
+    /* Invalid signature error */
+    leaw msgInvalidSignature, %si
+    call Print
+    jmp HaltSystem
+
+PartitionNotFound:
+    /* Active partition not found error */
+    leaw msgPartitionNotFound, %si
+    call Print
+    jmp HaltSystem
+
+VbrReadFail:
+    /* VBR read failed error */
+    leaw msgVbrReadFail, %si
+    call Print
+    jmp HaltSystem
+
+HaltSystem:
+    /* Disable interrupts and stop the CPU */
+    cli
+    hlt
+    jmp HaltSystem
+
+Print:
+    /* Simple routine to print messages */
+    lodsb
+    orb     %al, %al
+    jz      DonePrint
+    movb    $0x0E, %ah
+    movw    $0x07, %bx
+    int     $0x10
+    jmp     Print
+DonePrint:
+    retw
+
+.BootDrive:
+    /* Storage for the boot drive number */
+    .byte 0
+
+.Dap:
+    /* Storage for the Disk Address Packet (DAP) */
+    .fill 16, 1, 0
+
+.LbaStart:
+    /* Storage for the LBA start */
+    .long 0
+
+msgInvalidSignature:
+    .asciz "Invalid partition signature!"
+
+msgPartitionNotFound:
+    .asciz "Bootable partition not found!"
+
+msgVbrReadFail:
+    .asciz "VBR read failed!"
+
+msgXtosBoot:
+    .asciz "Starting XTOS boot loader...\r\n"
+
+/* Fill the rest of the MBR with zeros and add MBR signature at the end */
+.fill (510 - (. - Start)), 1, 0
+.word 0xAA55

boot/xtldr/config.cc

@@ -622,7 +622,7 @@ Configuration::ParseConfigFile(IN CONST PCHAR RawConfig,
             SectionName = InputData;
 
             /* Find end of the section name */
-            while(*InputData != ']' && *InputData != '\0' && *InputData != '\n')
+            while(*InputData != ']' && *InputData != '\0' && *InputData != '\r' && *InputData != '\n')
             {
                 /* Advance to the next character */
                 InputData++;
@@ -672,7 +672,7 @@ Configuration::ParseConfigFile(IN CONST PCHAR RawConfig,
             Key = InputData;
 
             /* Find end of the key */
-            while(*InputData != '=' && *InputData != '\0' && *InputData != '\n')
+            while(*InputData != '=' && *InputData != '\0' && *InputData != '\r' && *InputData != '\n')
             {
                 /* Advance to the next character */
                 InputData++;
@@ -700,7 +700,7 @@ Configuration::ParseConfigFile(IN CONST PCHAR RawConfig,
             Value = InputData;
 
             /* Find end of the value */
-            while(*InputData != '\0' && *InputData != '\n')
+            while(*InputData != '\0' && *InputData != '\r' && *InputData != '\n')
             {
                 /* Advance to the next character */
                 InputData++;

boot/xtldr/modules/xtos_o/xtos.cc

@@ -414,7 +414,6 @@ Xtos::InitializeLoaderBlock(IN PXTBL_PAGE_MAPPING PageMap,
 {
     PKERNEL_INITIALIZATION_BLOCK LoaderBlock;
     EFI_PHYSICAL_ADDRESS Address;
-    // PVOID RuntimeServices;
     EFI_STATUS Status;
     UINT BlockPages;
     UINT ParametersSize;
@@ -445,20 +444,10 @@ Xtos::InitializeLoaderBlock(IN PXTBL_PAGE_MAPPING PageMap,
     /* Set LoaderInformation block properties */
     LoaderBlock->LoaderInformation.DbgPrint = (PVOID)XtLdrProtocol->Debug.Print;
 
-    /* Attempt to find virtual address of the EFI Runtime Services */
-    // Status = XtLdrProtocol->GetVirtualAddress(MemoryMappings, &EfiSystemTable->RuntimeServices->Hdr, &RuntimeServices);
-    // if(Status == STATUS_EFI_SUCCESS)
-    // {
     /* Set FirmwareInformation block properties */
     LoaderBlock->FirmwareInformation.FirmwareType = SystemFirmwareEfi;
-        LoaderBlock->FirmwareInformation.EfiFirmware.EfiVersion = 0; //EfiSystemTable->Hdr.Revision;
+    // LoaderBlock->FirmwareInformation.EfiFirmware.EfiVersion = EfiSystemTable->Hdr.Revision;
     LoaderBlock->FirmwareInformation.EfiFirmware.EfiRuntimeServices = NULLPTR;
-    // }
-    // else
-    // {
-    //     /* Set invalid firmware type to indicate that kernel cannot rely on FirmwareInformation block */
-    //     LoaderBlock->FirmwareInformation.FirmwareType = SystemFirmwareInvalid;
-    // }
 
     /* Copy parameters to kernel initialization block */
     LoaderBlock->KernelParameters = (PWCHAR)((UINT_PTR)*VirtualAddress + sizeof(KERNEL_INITIALIZATION_BLOCK));
@@ -663,7 +652,7 @@ Xtos::RunBootSequence(IN PEFI_FILE_HANDLE BootDir,
     /* Add kernel image memory mapping */
     Status = XtLdrProtocol->Memory.MapVirtualMemory(&PageMap, ImageContext->VirtualAddress,
                                                     ImageContext->PhysicalAddress, ImageContext->ImagePages,
-                                                    LoaderExceptionBlock); // 0 is LoaderExceptionBlock?! Should be LoaderSystemCode?
+                                                    LoaderSystemCode);
     if(Status != STATUS_EFI_SUCCESS)
     {
         return Status;

configure.ps1

@@ -4,48 +4,41 @@
 # DESCRIPTION: Project configuration script for preparing the build environment
 # DEVELOPERS:  Aiken Harris <harraiken91@gmail.com>
 
-
 # Check XTchain
 if (-not $env:XTCVER) {
-    Write-Host "XTChain not detected or corrupted!"
+    Write-Error "XTChain not detected or corrupted!"
     exit 1
 }
 
-# Set target architecture
-if ($env:TARGET) {
-    $ARCH = $env:TARGET
-} else {
-    $ARCH = "amd64"
-}
+# Set target architecture defaulting to amd64
+$ARCH = if ($env:TARGET) { $env:TARGET } else { "amd64" }
 
-# Set target build type
-if (-not $env:BUILD_TYPE) {
-    $env:BUILD_TYPE = "DEBUG"
-}
+# Set target build type defaulting to Debug
+$env:BUILD_TYPE = if ($env:BUILD_TYPE -in @("Debug", "Release")) { $env:BUILD_TYPE } else { "Debug" }
 
 # Set variables
-$EXECTOS_SOURCE_DIR = (Get-Location).Path
-$EXECTOS_BINARY_DIR = "build-$($ARCH)-$($env:BUILD_TYPE.ToLower())"
+$EXECTOS_SOURCE_DIR = $PSScriptRoot
+$EXECTOS_BINARY_DIR = Join-Path $EXECTOS_SOURCE_DIR "build-$ARCH-$($env:BUILD_TYPE.ToLower())"
 
-# Create directories if needed
-if ($EXECTOS_SOURCE_DIR -eq (Get-Location).Path) {
-    Write-Host "Creating directories in $EXECTOS_BINARY_DIR"
+# Create build directory
+if (-not (Test-Path $EXECTOS_BINARY_DIR)) {
+    Write-Host "Creating build directory: $EXECTOS_BINARY_DIR"
     New-Item -ItemType Directory -Path $EXECTOS_BINARY_DIR -Force | Out-Null
-    Set-Location -Path $EXECTOS_BINARY_DIR
 }
 
+Set-Location $EXECTOS_BINARY_DIR
+
 # Delete old cache
-Remove-Item -Path "CMakeCache.txt" -ErrorAction SilentlyContinue
-Remove-Item -Path "host-tools/CMakeCache.txt" -ErrorAction SilentlyContinue
+Remove-Item "CMakeCache.txt", "host-tools/CMakeCache.txt" -ErrorAction SilentlyContinue
 
 # Configure project using CMake
-& cmake -G Ninja -DARCH:STRING=$($ARCH) -DBUILD_TYPE:STRING=$($env:BUILD_TYPE) $EXECTOS_SOURCE_DIR
+& cmake -G Ninja "-DARCH:STRING=$ARCH" "-DBUILD_TYPE:STRING=$($env:BUILD_TYPE)" $EXECTOS_SOURCE_DIR
 
 # Check if configuration succeeded
 if ($LASTEXITCODE -ne 0) {
-    Write-Host "Configure script failed."
+    Write-Error "Configure script failed."
     exit 1
-} else {
-    "$($ARCH)" | Out-File -Encoding ASCII -NoNewline build.arch
-    Write-Host "Configure script completed. Enter '$EXECTOS_BINARY_DIR' directory and execute 'xbuild' to build ExectOS."
 }
+
+$ARCH | Out-File -Encoding ASCII -NoNewline "build.arch"
+Write-Host "Configure completed. Run 'xbuild' to build ExectOS."

sdk/cmake/emulation.cmake

@@ -8,41 +8,79 @@ endif()
 # This target creates a disk image
 add_custom_target(diskimg
                   DEPENDS install
-                  COMMAND sh -c "dd if=/dev/zero of=${EXECTOS_BINARY_DIR}/output/disk.img bs=512 count=${PROJECT_DISK_IMAGE_BLOCKS} 2>/dev/null 1>/dev/null"
-                  COMMAND parted ${EXECTOS_BINARY_DIR}/output/disk.img -s -a minimal mklabel gpt
-                  COMMAND parted ${EXECTOS_BINARY_DIR}/output/disk.img -s -a minimal mkpart EFI FAT32 2048s ${PROJECT_PART_IMAGE_BLOCKS}s
-                  COMMAND parted ${EXECTOS_BINARY_DIR}/output/disk.img -s -a minimal toggle 1 boot
-                  COMMAND sh -c "dd if=/dev/zero of=${EXECTOS_BINARY_DIR}/output/part.img bs=512 count=${PROJECT_PART_IMAGE_BLOCKS} 2>/dev/null 1>/dev/null"
-                  COMMAND mformat -i ${EXECTOS_BINARY_DIR}/output/part.img -h32 -t32 -n64 -L32
-                  COMMAND sh -c "mcopy -s -i ${EXECTOS_BINARY_DIR}/output/part.img ${EXECTOS_BINARY_DIR}/output/binaries/* ::"
-                  COMMAND sh -c "dd if=${EXECTOS_BINARY_DIR}/output/part.img of=${EXECTOS_BINARY_DIR}/output/disk.img bs=512 count=${PROJECT_PART_IMAGE_BLOCKS} seek=2048 conv=notrunc 2>/dev/null 1>/dev/null"
-                  COMMAND rm ${EXECTOS_BINARY_DIR}/output/part.img
+                  COMMAND diskimg -c ${EXECTOS_BINARY_DIR}/output/binaries -f 32 -o ${EXECTOS_BINARY_DIR}/output/disk.img -s ${PROJECT_DISK_IMAGE_SIZE}
+                  -m ${EXECTOS_BINARY_DIR}/boot/bootsect/mbrboot.bin -v ${EXECTOS_BINARY_DIR}/boot/bootsect/espboot.bin
                   VERBATIM)
 
-# This target starts up a BOCHS+OVMF virtual machine
+find_program(BOCHS_EMULATOR bochs)
+if(BOCHS_EMULATOR)
+    # This target starts up a BOCHS+BIOS virtual machine
     add_custom_target(bochsvm
                       DEPENDS diskimg
                       COMMAND bochs -f ../sdk/firmware/bochsrc_${ARCH}.cfg -q -unlock
                       VERBATIM USES_TERMINAL)
+endif()
 
+find_program(QEMU_EMULATOR ${QEMU_COMMAND})
+if(QEMU_EMULATOR)
+    if(CMAKE_HOST_LINUX)
         # This target starts up a QEMU+OVMF virtual machine using KVM accelerator
-add_custom_target(testkvm
+        add_custom_target(testefikvm
                           DEPENDS install
-                  COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-KVM" -machine type=q35,kernel_irqchip=on,accel=kvm,mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
+                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-KVM" -machine type=q35,kernel_irqchip=on,accel=kvm,mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
                                                   -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                          -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_code_${ARCH}.fd,if=pflash,format=raw,unit=0,readonly=on
-                                          -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_vars_${ARCH}.fd,if=pflash,format=raw,unit=1
+                                                  -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
                                                   -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
                                                   -boot menu=on -d int -M smm=off -no-reboot -no-shutdown -serial stdio
                           VERBATIM USES_TERMINAL)
+    elseif(CMAKE_HOST_WIN32)
+        # This target starts up a QEMU+OVMF virtual machine using WHPX accelerator
+        add_custom_target(testefiwhpx
+                          DEPENDS install
+                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-WHPX" -machine type=q35,kernel_irqchip=off,accel=whpx,mem-merge=off,vmport=off
+                                                  -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
+                                                  -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
+                                                  -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
+                                                  -boot menu=on -d int -M smm=off -no-reboot -no-shutdown -serial stdio
+                          VERBATIM USES_TERMINAL)
+    endif()
 
     # This target starts up a QEMU+OVMF virtual machine using TCG accelerator
-add_custom_target(testtcg
+    add_custom_target(testefitcg
                       DEPENDS install
-                  COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-TCG" -machine type=q35,accel=tcg -cpu max,-hypervisor
+                      COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-TCG" -machine type=q35,accel=tcg -cpu max,-hypervisor
                                               -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                          -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_code_${ARCH}.fd,if=pflash,format=raw,unit=0,readonly=on
-                                          -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_vars_${ARCH}.fd,if=pflash,format=raw,unit=1
+                                              -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
                                               -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
-                                          -boot menu=on -d int -M smm=off -no-reboot -no-shutdown -serial stdio
+                                              -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
                       VERBATIM USES_TERMINAL)
+
+    if(CMAKE_HOST_LINUX)
+        # This target starts up a QEMU+SEABIOS virtual machine using KVM accelerator
+        add_custom_target(testkvm
+                          DEPENDS diskimg
+                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-KVM" -machine type=q35,kernel_irqchip=on,accel=kvm,mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
+                                                  -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
+                                                  -hda ${EXECTOS_BINARY_DIR}/output/disk.img
+                                                  -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
+                          VERBATIM USES_TERMINAL)
+    elseif(CMAKE_HOST_WIN32)
+        # This target starts up a QEMU+SEABIOS virtual machine using WHPX accelerator
+        add_custom_target(testwhpx
+                          DEPENDS diskimg
+                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-WHPX" -machine type=q35,kernel_irqchip=off,accel=whpx,mem-merge=off,vmport=off
+                                                  -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
+                                                  -hda ${EXECTOS_BINARY_DIR}/output/disk.img
+                                                  -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
+                          VERBATIM USES_TERMINAL)
+    endif()
+
+    # This target starts up a QEMU+SEABIOS virtual machine using TCG accelerator
+    add_custom_target(testtcg
+                      DEPENDS diskimg
+                      COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-TCG" -machine type=q35,accel=tcg -cpu max,-hypervisor
+                                              -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
+                                              -hda ${EXECTOS_BINARY_DIR}/output/disk.img
+                                              -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
+                      VERBATIM USES_TERMINAL)
+endif()

sdk/cmake/functions.cmake

@@ -69,6 +69,7 @@ function(compile_bootsector NAME SOURCE BASEADDR ENTRYPOINT)
         COMMAND ${CMAKE_ASM_COMPILER}
             /nologo
             --target=i386-none-elf
+            -I${CMAKE_CURRENT_SOURCE_DIR}
             /Fo${CMAKE_CURRENT_BINARY_DIR}/${OBJECT_NAME}
             -c -- ${SOURCE}
         COMMAND ${CMAKE_ASM_LINKER}
@@ -87,18 +88,13 @@ function(compile_bootsector NAME SOURCE BASEADDR ENTRYPOINT)
     )
 endfunction()
 
-# This function sets a property for specified module
-function(set_module_property MODULE PROPERTY FLAGS)
-    if(NOT ${ARGC} EQUAL 3)
-        message(FATAL_ERROR "Invalid number of arguments passwd to add_module_property() function")
-    endif()
-    get_target_property(VAL ${MODULE} ${PROPERTY})
-    if(VAL)
-        set(VAL "${VAL} ${FLAGS}")
-    else()
-        set(VAL "${FLAGS}")
-    endif()
-    set_property(TARGET ${MODULE} PROPERTY ${PROPERTY} ${VAL})
+# This function sets the the qemu disk image size (in MiB)
+function(set_disk_image_size SIZE)
+	MATH(EXPR DISK_BLOCKS ${SIZE}*1024*1024/512)
+	MATH(EXPR PART_BLOCKS ${DISK_BLOCKS}-2048)
+	set(PROJECT_DISK_IMAGE_SIZE ${SIZE} CACHE INTERNAL "PROJECT_DISK_IMAGE_SIZE")
+	set(PROJECT_DISK_IMAGE_BLOCKS ${DISK_BLOCKS} CACHE INTERNAL "PROJECT_DISK_IMAGE_BLOCKS")
+	set(PROJECT_PART_IMAGE_BLOCKS ${PART_BLOCKS} CACHE INTERNAL "PROJECT_PART_IMAGE_BLOCKS")
 endfunction()
 
 # This function installs specified directory recursively under destination directory
@@ -117,6 +113,20 @@ function(set_install_target TARGET DESTINATION)
     install(TARGETS ${TARGET} DESTINATION ${EXECTOS_BINARY_DIR}/output/binaries/${DESTINATION})
 endfunction()
 
+# This function sets a property for specified module
+function(set_module_property MODULE PROPERTY FLAGS)
+    if(NOT ${ARGC} EQUAL 3)
+        message(FATAL_ERROR "Invalid number of arguments passwd to add_module_property() function")
+    endif()
+    get_target_property(VAL ${MODULE} ${PROPERTY})
+    if(VAL)
+        set(VAL "${VAL} ${FLAGS}")
+    else()
+        set(VAL "${FLAGS}")
+    endif()
+    set_property(TARGET ${MODULE} PROPERTY ${PROPERTY} ${VAL})
+endfunction()
+
 function(set_sdk_target FILENAME DESTINATION)
     install(DIRECTORY ${FILENAME} DESTINATION ${EXECTOS_BINARY_DIR}/output/sdk/${DESTINATION})
 endfunction()
@@ -130,11 +140,3 @@ function(set_specfile SPECFILE EXPORTNAME)
     add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${FILENAME}.def ${CMAKE_CURRENT_BINARY_DIR}/${FILENAME}.c
                        COMMAND ${CMAKE_SPEC_COMPILER} -a=${ARCH} -n=${EXPORTNAME} -d=${CMAKE_CURRENT_BINARY_DIR}/${FILENAME}.def -s=${CMAKE_CURRENT_BINARY_DIR}/${FILENAME}.c ${CMAKE_CURRENT_SOURCE_DIR}/${SPECFILE})
 endfunction()
-
-# This function sets the the qemu disk image size (in MiB)
-function(set_disk_image_size SIZE)
-	MATH(EXPR DISK_BLOCKS ${SIZE}*1024*1024/512)
-	MATH(EXPR PART_BLOCKS ${DISK_BLOCKS}-2048)
-	set(PROJECT_DISK_IMAGE_BLOCKS ${DISK_BLOCKS} CACHE INTERNAL "PROJECT_DISK_IMAGE_BLOCKS")
-	set(PROJECT_PART_IMAGE_BLOCKS ${PART_BLOCKS} CACHE INTERNAL "PROJECT_PART_IMAGE_BLOCKS")
-endfunction()

sdk/firmware/bochsrc_amd64.cfg

@@ -3,9 +3,9 @@ plugin_ctrl: usb_xhci=false, serial=true, e1000=false, extfpuirq=true, parallel=
 config_interface: textconfig
 display_library: x
 memory: host=64, guest=64
-romimage: file="../sdk/firmware/ovmf_pure_amd64.fd", address=0x00000000, options=none
+romimage: file="../sdk/firmware/rombios.bin", address=0x00000000, options=none
 vgaromimage: file="../sdk/firmware/vgabios.bin"
-boot: floppy
+boot: disk
 floppy_bootsig_check: disabled=0
 floppya: type=1_44
 # no floppyb
@@ -27,11 +27,7 @@ optramimage3: file=none
 optramimage4: file=none
 pci: enabled=1, chipset=i440fx, slot1=cirrus, slot2=none, slot3=none, slot4=none, slot5=none
 vga: extension=cirrus, update_freq=5, realtime=1, ddc=builtin
-cpu: count=1:1:1, ips=400000000, quantum=16, model=bx_generic, reset_on_triple_fault=0, cpuid_limit_winnt=0, ignore_bad_msrs=1, mwait_is_nop=0
-cpuid: level=6, stepping=3, model=3, family=6, vendor_string="GenuineIntel", brand_string="              Intel(R) Pentium(R) 4 CPU        "
-cpuid: mmx=true, apic=xapic, simd=sse4_2, sse4a=false, misaligned_sse=false, sep=true
-cpuid: movbe=false, adx=false, aes=false, sha=false, xsave=false, xsaveopt=false, x86_64=true
-cpuid: 1g_pages=false, pcid=false, fsgsbase=false, smep=false, smap=false, mwait=true
+cpu: count=1:1:1, ips=400000000, quantum=16, model=corei7_sandy_bridge_2600k, reset_on_triple_fault=0, cpuid_limit_winnt=0, ignore_bad_msrs=1, mwait_is_nop=0
 print_timestamps: enabled=0
 port_e9_hack: enabled=0
 private_colormap: enabled=0

sdk/firmware/bochsrc_i686.cfg

@@ -3,9 +3,9 @@ plugin_ctrl: usb_xhci=false, serial=true, e1000=false, extfpuirq=true, parallel=
 config_interface: textconfig
 display_library: x
 memory: host=64, guest=64
-romimage: file="../sdk/firmware/ovmf_pure_i686.fd", address=0x00000000, options=none
+romimage: file="../sdk/firmware/rombios.bin", address=0x00000000, options=none
 vgaromimage: file="../sdk/firmware/vgabios.bin"
-boot: floppy
+boot: disk
 floppy_bootsig_check: disabled=0
 floppya: type=1_44
 # no floppyb
@@ -27,11 +27,7 @@ optramimage3: file=none
 optramimage4: file=none
 pci: enabled=1, chipset=i440fx, slot1=cirrus, slot2=none, slot3=none, slot4=none, slot5=none
 vga: extension=cirrus, update_freq=5, realtime=1, ddc=builtin
-cpu: count=1:1:1, ips=400000000, quantum=16, model=bx_generic, reset_on_triple_fault=0, cpuid_limit_winnt=0, ignore_bad_msrs=1, mwait_is_nop=0
-cpuid: level=6, stepping=3, model=3, family=6, vendor_string="GenuineIntel", brand_string="              Intel(R) Pentium(R) 4 CPU        "
-cpuid: mmx=true, apic=xapic, simd=sse4_2, sse4a=false, misaligned_sse=false, sep=true
-cpuid: movbe=false, adx=false, aes=false, sha=false, xsave=false, xsaveopt=false, x86_64=true
-cpuid: 1g_pages=false, pcid=false, fsgsbase=false, smep=false, smap=false, mwait=true
+cpu: count=1:1:1, ips=400000000, quantum=16, model=corei7_sandy_bridge_2600k, reset_on_triple_fault=0, cpuid_limit_winnt=0, ignore_bad_msrs=1, mwait_is_nop=0
 print_timestamps: enabled=0
 port_e9_hack: enabled=0
 private_colormap: enabled=0