configure.ps1: Fix path handling and improve reliability

- Use $PSScriptRoot for reliable source directory detection
- Use Join-Path for proper path construction
- Validate BUILD_TYPE against Debug/Release
- Fix CMake argument quoting
- Use Write-Error for error messages

CMakeLists.txt

@@ -60,12 +60,10 @@ file(RELATIVE_PATH _PATH_PREFIX ${EXECTOS_BINARY_DIR} ${EXECTOS_SOURCE_DIR})
 add_compiler_flags(-D__RELFILE__="&__FILE__[__FILE__[0] == '.' ? sizeof \\\"${_PATH_PREFIX}\\\" - 1 : sizeof XTOS_SOURCE_DIR]")
 
 # Set the virtual disk image size (in MiB)
-set_disk_image_size(32)
+set_disk_image_size(48)
 
 # Build all subprojects
 add_subdirectory(boot)
-add_subdirectory(bootdata)
 add_subdirectory(drivers)
 add_subdirectory(sdk)
-add_subdirectory(xtldr)
 add_subdirectory(xtoskrnl)

CONTRIBUTING.md

@@ -9,8 +9,7 @@ porting drivers, fixing bugs, writing tests, creating documentation, or helping
 love the help.
 
 ## Wish List
-If you are looking for a way to contribute, but you are not sure where to start, check our [IDEAS](IDEAS.md) and
+If you are looking for a way to contribute, but you are not sure where to start, check our list of
-[KNOWN ISSUES](KNOWN_ISSUES.md) pages for suggestions. We try to keep them up to date. You can also check a list of
 [open issues](https://git.codingworkshop.eu.org/xt-sys/exectos/issues). If you find interesting task and you are serious
 about tackling one, feel free to contact us. We will be able to provide a more detailed information and suggestions
 towards getting started.

IDEAS.md

@@ -1,9 +0,0 @@
-## ExectOS Ideas
-This is a list of ideas that migh but not must be realized.
-
-### XTOSKRNL
- - [ ] Implement mechanism for detecting CPU features and checking hardware requirements. If CPU does not meet
-       requirements, it should cause a kernel panic before any non-supported instruction is being used.
- - [ ] Finish framebuffer and terminal implementation. Initialization code is already prepared as well as routines for
-       clearing the screen and drawing single points. Terminal should be instantiable (should be able to create many
-       terminals and switch between them) and work on top of FB. It should define ANSI colors and scrollback buffer.

KNOWN_ISSUES.md

@@ -1,6 +0,0 @@
-## ExectOS Known Issues
-This is a list of well known bugs that exists in all master branch builds.
-
-### XTLDR
- - [ ] EFI Runtime Services are not mapped properly into higher half. They are mapped itself, but all pointers inside
-       that structure point to some physical address that is unavailable after paging is enabled.

README.md

@@ -58,15 +58,17 @@ design, it requires a modern EFI enabled hardware. It is not possible currently
 
 # Source structure
 | Directory        | Description                                                  |
-|-------------|----------------------------------------------------------|
+|------------------|--------------------------------------------------------------|
-| bootdata    | default configuration and data needed to boot XTOS       |
+| boot/bootdata    | default configuration and data needed to boot XTOS           |
+| boot/bootsect    | boot sector code (MBR & VBR) initializing the boot process   |
+| boot/xtldr       | XTOS boot loader source code                                 |
 | drivers          | XT native drivers source code                                |
-| sdk/cmake   | Host toolchain configuration and build-related functions |
+| sdk/cmake        | host toolchain configuration and build-related functions     |
+| sdk/firmware     | firmware enabling XTOS to boot on virtual machines           |
 | sdk/xtdk         | XT Software Development Kit headers                          |
 | services         | integral subsystems services source code                     |
 | subsystems       | environment subsystems source code                           |
 | xtoskrnl         | XTOS kernel source code                                      |
-| xtldr       | XTOS boot loader source code                             |
 
 # Build
 XTOS can only be built using [XTchain](https://git.codingworkshop.eu.org/xt-sys/xtchain), a dedicated toolchain designed

boot/CMakeLists.txt

@@ -1 +1,3 @@
+add_subdirectory(bootdata)
 add_subdirectory(bootsect)
+add_subdirectory(xtldr)

boot/bootsect/espboot.S

@@ -84,14 +84,146 @@ RealStart:
     leaw -16(%bp), %sp
     sti
 
-    /* Print message */
+    /* Get drive number */
-    movw $msgUnavailable, %si
+    cmpb $0xFF, DriveNumber - Start(%bp)
-    call Print
+    jne GetDriveParameters
+    movb %dl, DriveNumber - Start(%bp)
 
-    /* Wait for key press and reboot */
+GetDriveParameters:
-    xorw %ax, %ax
+    /* Get drive parameters from the BIOS */
-    int $0x16
+    movb DriveNumber - Start(%bp), %dl
-    int $0x19
+    movb $0x08, %ah
+    movb $0x00, %al
+    int $0x13
+    jnc GetDriveSize
+    movw $0xFFFF, %cx
+    movb %cl, %dh
+
+GetDriveSize:
+    /* Get drive size from the BIOS */
+    movzbl %dh, %eax
+    incw %ax
+    movzbl %cl, %edx
+    andb $0x3F, %dl
+    mulw %dx
+    xchgb %cl, %ch
+    shrb $0x06, %ch
+    incw %cx
+    movzwl %cx, %ecx
+    mull %ecx
+    movl %eax, %edi
+
+VerifyBiosParameterBlock:
+    /* Verify the FAT32 BPB */
+    cmpw $0x00, SectorsPerFat - Start(%bp)
+    jne FsError
+    cmpw $0x00, FsVersion - Start(%bp)
+    ja FsError
+
+ReadExtraCode:
+    /* Read second VBR sector with extra boot code */
+    movl HiddenSectors - Start(%bp), %eax
+    addl $0x02, %eax
+    movw $0x01, %cx
+    xorw %bx, %bx
+    movw %bx, %es
+    movw $0x7E00, %bx
+    call ReadSectors
+    jmp StartSectors
+
+ReadSectors:
+    /* Check for extended BIOS functions and use it only if available */
+    pushw %es
+    pushal
+    movb $0x41, %ah
+    movw $0x55AA, %bx
+    movb DriveNumber - Start(%bp), %dl
+    int $0x13
+    jc ReadCHS
+    cmpw $0xAA55, %bx
+    jne ReadCHS
+    testb $0x01, %cl
+    jz ReadCHS
+
+    /* Verify drive size and determine whether to use CHS or LBA */
+    cmpl %edi, %eax
+    jnb ReadLBA
+
+ReadCHS:
+    /* Read sectors using CHS */
+    pushw %cx
+    pushal
+    xorl %edx, %edx
+    movzwl SectorsPerTrack - Start(%bp), %ecx
+    divl %ecx
+    incb %dl
+    movb %dl, %cl
+    movl %eax, %edx
+    shrl $0x10, %edx
+    divw NumberOfHeads - Start(%bp)
+    movb %dl, %dh
+    movb DriveNumber - Start(%bp), %dl
+    movb %al, %ch
+    rorb $0x01, %ah
+    rorb $0x01, %ah
+    orb %ah, %cl
+    movw $0x0201, %ax
+    int $0x13
+    popal
+    popw %cx
+    jc DiskError
+    incl %eax
+    movw %es, %dx
+    addw $0x20, %dx
+    movw %dx, %es
+    loop ReadCHS
+    popw %es
+    ret
+
+ReadLBA:
+    /* Prepare DAP packet and read sectors using LBA */
+    popal
+    pushw %cx
+    pushal
+    pushw $0x00
+    pushw $0x00
+    pushl %eax
+    pushw %es
+    pushw %bx
+    pushw %cx
+    pushw $0x10
+    movw %sp, %si
+    movb DriveNumber - Start(%bp), %dl
+    movb $0x42, %ah
+    int $0x13
+    jc DiskError
+    addw $0x10, %sp
+    popal
+    popw %si
+    pushw %bx
+    movzwl %si, %ebx
+    addl %ebx, %eax
+    shll $0x05, %ebx
+    movw %es, %dx
+    addw %bx, %dx
+    movw %dx, %es
+    popw %bx
+    subw %si, %cx
+    jnz ReadLBA
+    popw %es
+    ret
+
+DiskError:
+    /* Display disk error message and reboot */
+    movw $msgDiskError, %si
+    call Print
+    jmp Reboot
+
+FsError:
+    /* Display FS error message and reboot */
+    movw $msgFsError, %si
+    call Print
+    jmp Reboot
 
 Print:
     /* Simple routine to print messages */
@@ -105,9 +237,40 @@ Print:
 DonePrint:
     retw
 
-msgUnavailable:
+Reboot:
-    .ascii "XTLDR requires EFI-based system!\r\nPress any key to restart\r\n"
+    /* Display a message, wait for a key press and reboot */
+    movw $msgAnyKey, %si
+    call Print
+    xorw %ax, %ax
+    int $0x16
+    int $0x19
+
+msgAnyKey:
+    .ascii "Press any key to restart\r\n"
+
+msgDiskError:
+    .ascii "Disk error\r\n"
+
+msgFsError:
+    .ascii "File system error\r\n"
 
 /* Fill the rest of the VBR with zeros and add VBR signature at the end */
 .fill (510 - (. - Start)), 1, 0
 .word 0xAA55
+
+
+StartSectors:
+    /* Print message */
+    movw $msgUnavailable, %si
+    call Print
+
+    /* Wait for key press and reboot */
+    xorw %ax, %ax
+    int $0x16
+    int $0x19
+
+msgUnavailable:
+    .ascii "XTLDR requires EFI-based system!\r\nPress any key to restart\r\n"
+
+/* Fill the rest of the extra VBR with zeros */
+.fill (1024 - (. - Start)), 1, 0

configure.ps1

@@ -4,48 +4,41 @@
 # DESCRIPTION: Project configuration script for preparing the build environment
 # DEVELOPERS:  Aiken Harris <harraiken91@gmail.com>
 
-
 # Check XTchain
 if (-not $env:XTCVER) {
-    Write-Host "XTChain not detected or corrupted!"
+    Write-Error "XTChain not detected or corrupted!"
     exit 1
 }
 
-# Set target architecture
+# Set target architecture defaulting to amd64
-if ($env:TARGET) {
+$ARCH = if ($env:TARGET) { $env:TARGET } else { "amd64" }
-    $ARCH = $env:TARGET
-} else {
-    $ARCH = "amd64"
-}
 
-# Set target build type
+# Set target build type defaulting to Debug
-if (-not $env:BUILD_TYPE) {
+$env:BUILD_TYPE = if ($env:BUILD_TYPE -in @("Debug", "Release")) { $env:BUILD_TYPE } else { "Debug" }
-    $env:BUILD_TYPE = "DEBUG"
-}
 
 # Set variables
-$EXECTOS_SOURCE_DIR = (Get-Location).Path
+$EXECTOS_SOURCE_DIR = $PSScriptRoot
-$EXECTOS_BINARY_DIR = "build-$($ARCH)-$($env:BUILD_TYPE.ToLower())"
+$EXECTOS_BINARY_DIR = Join-Path $EXECTOS_SOURCE_DIR "build-$ARCH-$($env:BUILD_TYPE.ToLower())"
 
-# Create directories if needed
+# Create build directory
-if ($EXECTOS_SOURCE_DIR -eq (Get-Location).Path) {
+if (-not (Test-Path $EXECTOS_BINARY_DIR)) {
-    Write-Host "Creating directories in $EXECTOS_BINARY_DIR"
+    Write-Host "Creating build directory: $EXECTOS_BINARY_DIR"
     New-Item -ItemType Directory -Path $EXECTOS_BINARY_DIR -Force | Out-Null
-    Set-Location -Path $EXECTOS_BINARY_DIR
 }
 
+Set-Location $EXECTOS_BINARY_DIR
+
 # Delete old cache
-Remove-Item -Path "CMakeCache.txt" -ErrorAction SilentlyContinue
+Remove-Item "CMakeCache.txt", "host-tools/CMakeCache.txt" -ErrorAction SilentlyContinue
-Remove-Item -Path "host-tools/CMakeCache.txt" -ErrorAction SilentlyContinue
 
 # Configure project using CMake
-& cmake -G Ninja -DARCH:STRING=$($ARCH) -DBUILD_TYPE:STRING=$($env:BUILD_TYPE) $EXECTOS_SOURCE_DIR
+& cmake -G Ninja "-DARCH:STRING=$ARCH" "-DBUILD_TYPE:STRING=$($env:BUILD_TYPE)" $EXECTOS_SOURCE_DIR
 
 # Check if configuration succeeded
 if ($LASTEXITCODE -ne 0) {
-    Write-Host "Configure script failed."
+    Write-Error "Configure script failed."
     exit 1
-} else {
-    "$($ARCH)" | Out-File -Encoding ASCII -NoNewline build.arch
-    Write-Host "Configure script completed. Enter '$EXECTOS_BINARY_DIR' directory and execute 'xbuild' to build ExectOS."
 }
+
+$ARCH | Out-File -Encoding ASCII -NoNewline "build.arch"
+Write-Host "Configure completed. Run 'xbuild' to build ExectOS."

sdk/cmake/emulation.cmake

@@ -23,36 +23,57 @@ endif()
 
 find_program(QEMU_EMULATOR ${QEMU_COMMAND})
 if(QEMU_EMULATOR)
+    if(CMAKE_HOST_LINUX)
         # This target starts up a QEMU+OVMF virtual machine using KVM accelerator
         add_custom_target(testefikvm
                           DEPENDS install
-                      COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-KVM" -machine type=q35,kernel_irqchip=on,accel="kvm:whpx",mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
+                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-KVM" -machine type=q35,kernel_irqchip=on,accel=kvm,mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
                                                   -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                              -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_code_${ARCH}.fd,if=pflash,format=raw,unit=0,readonly=on
+                                                  -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
-                                              -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_vars_${ARCH}.fd,if=pflash,format=raw,unit=1
                                                   -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
                                                   -boot menu=on -d int -M smm=off -no-reboot -no-shutdown -serial stdio
                           VERBATIM USES_TERMINAL)
+    elseif(CMAKE_HOST_WIN32)
+        # This target starts up a QEMU+OVMF virtual machine using WHPX accelerator
+        add_custom_target(testefiwhpx
+                          DEPENDS install
+                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-WHPX" -machine type=q35,kernel_irqchip=off,accel=whpx,mem-merge=off,vmport=off
+                                                  -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
+                                                  -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
+                                                  -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
+                                                  -boot menu=on -d int -M smm=off -no-reboot -no-shutdown -serial stdio
+                          VERBATIM USES_TERMINAL)
+    endif()
 
     # This target starts up a QEMU+OVMF virtual machine using TCG accelerator
     add_custom_target(testefitcg
                       DEPENDS install
                       COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-TCG" -machine type=q35,accel=tcg -cpu max,-hypervisor
                                               -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                              -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_code_${ARCH}.fd,if=pflash,format=raw,unit=0,readonly=on
+                                              -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
-                                              -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_vars_${ARCH}.fd,if=pflash,format=raw,unit=1
                                               -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
                                               -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
                       VERBATIM USES_TERMINAL)
 
+    if(CMAKE_HOST_LINUX)
         # This target starts up a QEMU+SEABIOS virtual machine using KVM accelerator
         add_custom_target(testkvm
                           DEPENDS diskimg
-                      COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-KVM" -machine type=q35,kernel_irqchip=on,accel="kvm:whpx",mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
+                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-KVM" -machine type=q35,kernel_irqchip=on,accel=kvm,mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
                                                   -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
                                                   -hda ${EXECTOS_BINARY_DIR}/output/disk.img
                                                   -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
                           VERBATIM USES_TERMINAL)
+    elseif(CMAKE_HOST_WIN32)
+        # This target starts up a QEMU+SEABIOS virtual machine using WHPX accelerator
+        add_custom_target(testwhpx
+                          DEPENDS diskimg
+                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-WHPX" -machine type=q35,kernel_irqchip=off,accel=whpx,mem-merge=off,vmport=off
+                                                  -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
+                                                  -hda ${EXECTOS_BINARY_DIR}/output/disk.img
+                                                  -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
+                          VERBATIM USES_TERMINAL)
+    endif()
 
     # This target starts up a QEMU+SEABIOS virtual machine using TCG accelerator
     add_custom_target(testtcg

sdk/cmake/functions.cmake

@@ -69,6 +69,7 @@ function(compile_bootsector NAME SOURCE BASEADDR ENTRYPOINT)
         COMMAND ${CMAKE_ASM_COMPILER}
             /nologo
             --target=i386-none-elf
+            -I${CMAKE_CURRENT_SOURCE_DIR}
             /Fo${CMAKE_CURRENT_BINARY_DIR}/${OBJECT_NAME}
             -c -- ${SOURCE}
         COMMAND ${CMAKE_ASM_LINKER}

sdk/xtdk/amd64/artypes.h

@@ -394,13 +394,6 @@ typedef struct _CPU_IDENTIFICATION
     USHORT Stepping;
     CPU_VENDOR Vendor;
     UCHAR VendorName[13];
-    UINT32 StandardFeaturesEcx;
-    UINT32 StandardFeaturesEdx;
-    UINT32 ExtendedFeaturesEcx;
-    UINT32 ExtendedFeaturesEdx;
-    UINT32 Standard7FeaturesEbx;
-    UINT32 Standard7FeaturesEcx;
-    UINT32 Standard7FeaturesEdx;
 } CPU_IDENTIFICATION, *PCPU_IDENTIFICATION;
 
 /* CPUID registers */

sdk/xtdk/i686/artypes.h

@@ -359,10 +359,6 @@ typedef struct _CPU_IDENTIFICATION
     USHORT Stepping;
     CPU_VENDOR Vendor;
     UCHAR VendorName[13];
-    UINT32 StandardFeaturesEcx;
-    UINT32 StandardFeaturesEdx;
-    UINT32 ExtendedFeaturesEcx;
-    UINT32 ExtendedFeaturesEdx;
 } CPU_IDENTIFICATION, *PCPU_IDENTIFICATION;
 
 /* CPUID registers */

xtoskrnl/ar/amd64/procsup.cc

@@ -64,6 +64,9 @@ AR::ProcSup::IdentifyProcessor(VOID)
     CPUID_REGISTERS CpuRegisters;
     CPUID_SIGNATURE CpuSignature;
 
+    /* Not fully implemented yet */
+    UNIMPLEMENTED;
+
     /* Get current processor control block */
     Prcb = KE::Processor::GetCurrentProcessorControlBlock();
 
@@ -119,42 +122,7 @@ AR::ProcSup::IdentifyProcessor(VOID)
         Prcb->CpuId.Vendor = CPU_VENDOR_UNKNOWN;
     }
 
-    /* Get CPU standard features */
+    /* TODO: Store a list of CPU features in processor control block */
-    RtlZeroMemory(&CpuRegisters, sizeof(CPUID_REGISTERS));
-    CpuRegisters.Leaf = CPUID_GET_STANDARD1_FEATURES;
-    CpuFunc::CpuId(&CpuRegisters);
-
-    /* Store CPU standard features in processor control block */
-    Prcb->CpuId.StandardFeaturesEcx = CpuRegisters.Ecx;
-    Prcb->CpuId.StandardFeaturesEdx = CpuRegisters.Edx;
-
-    /* Get CPU extended features */
-    RtlZeroMemory(&CpuRegisters, sizeof(CPUID_REGISTERS));
-    CpuRegisters.Leaf = 0x80000001;
-    CpuFunc::CpuId(&CpuRegisters);
-
-    /* Store CPU extended features in processor control block */
-    Prcb->CpuId.ExtendedFeaturesEcx = CpuRegisters.Ecx;
-    Prcb->CpuId.ExtendedFeaturesEdx = CpuRegisters.Edx;
-
-    /* Get CPU leaf 7 features (subleaf 0) */
-    RtlZeroMemory(&CpuRegisters, sizeof(CPUID_REGISTERS));
-    CpuRegisters.Leaf = CPUID_GET_STANDARD7_FEATURES;
-    CpuRegisters.SubLeaf = 0;
-    CpuFunc::CpuId(&CpuRegisters);
-
-    /* Store CPU leaf 7 features in processor control block */
-    Prcb->CpuId.Standard7FeaturesEbx = CpuRegisters.Ebx;
-    Prcb->CpuId.Standard7FeaturesEcx = CpuRegisters.Ecx;
-    Prcb->CpuId.Standard7FeaturesEdx = CpuRegisters.Edx;
-    
-    /* Print CPU information */
-    DebugPrint(L"CPU: Vendor %hs, Family 0x%X, Model 0x%X, Stepping 0x%X\n",
-               Prcb->CpuId.VendorName,
-               Prcb->CpuId.Family,
-               Prcb->CpuId.Model,
-               Prcb->CpuId.Stepping);
-               
 }
 
 /**

xtoskrnl/ar/i686/procsup.cc

@@ -59,6 +59,9 @@ AR::ProcSup::IdentifyProcessor(VOID)
     CPUID_REGISTERS CpuRegisters;
     CPUID_SIGNATURE CpuSignature;
 
+    /* Not fully implemented yet */
+    UNIMPLEMENTED;
+
     /* Get current processor control block */
     Prcb = KE::Processor::GetCurrentProcessorControlBlock();
 
@@ -114,30 +117,7 @@ AR::ProcSup::IdentifyProcessor(VOID)
         Prcb->CpuId.Vendor = CPU_VENDOR_UNKNOWN;
     }
 
-    /* Get CPU standard features */
+    /* TODO: Store a list of CPU features in processor control block */
-    RtlZeroMemory(&CpuRegisters, sizeof(CPUID_REGISTERS));
-    CpuRegisters.Leaf = CPUID_GET_STANDARD1_FEATURES;
-    CpuFunc::CpuId(&CpuRegisters);
-
-    /* Store CPU standard features in processor control block */
-    Prcb->CpuId.StandardFeaturesEcx = CpuRegisters.Ecx;
-    Prcb->CpuId.StandardFeaturesEdx = CpuRegisters.Edx;
-
-    /* Get CPU extended features */
-    RtlZeroMemory(&CpuRegisters, sizeof(CPUID_REGISTERS));
-    CpuRegisters.Leaf = 0x80000001;
-    CpuFunc::CpuId(&CpuRegisters);
-
-    /* Store CPU extended features in processor control block */
-    Prcb->CpuId.ExtendedFeaturesEcx = CpuRegisters.Ecx;
-    Prcb->CpuId.ExtendedFeaturesEdx = CpuRegisters.Edx;
-
-    /* Print CPU information */
-    DebugPrint(L"CPU: Vendor %hs, Family 0x%X, Model 0x%X, Stepping 0x%X\n",
-               Prcb->CpuId.VendorName,
-               Prcb->CpuId.Family,
-               Prcb->CpuId.Model,
-               Prcb->CpuId.Stepping);
 }
 
 /**