diff --git a/bootdata/xtldr/xtldr.ini b/bootdata/xtldr/xtldr.ini
index 8bd454f..9b59049 100644
--- a/bootdata/xtldr/xtldr.ini
+++ b/bootdata/xtldr/xtldr.ini
@@ -6,12 +6,14 @@
 # Debug        - enables the debugging port and consists of two comma-separated parameters: com port and baud rate;
 #                it is also possible to specify custom port address with: COM0:[address],[baud_rate]
 # Default      - specifies which operating system listen in config file will be started if no choice is made
+# Modules      - supplies a list of modules that will be loaded in orded to extend XTLDR functionality
 # Timeout      - sets the countdown timer (in seconds) before the default OS get started automatically
 # Tune         - plays a tune on the pcspeaker right before the XTLDR loads
 #
 # Another type of section is [OS-Section] which adds a new position (operating system) to the boot menu. Each type
 # of the operating system provides a set of available parameters. If unsupported option is added, it is being ignored
 # by the XT Boot Loader. The available options are:
+# BootModules  - supplies a list of additional modules that will be loaded just before invoking the boot protocol
 # SystemName   - sets a long operating system name that will be shown on the boot menu
 # SystemType   - specifies an OS type from a predefined list of supported boot protocols
 # SystemPath   - the ARC path, eg. multi(0)disk(0)rdisk(0)partition(1)
@@ -21,14 +23,16 @@
 # Parameters   - specifies extra boot options for the kernel
 
 [XTLDR]
-Tune=400 880 2 988 2 783 2 392 2 587 3
 Debug=COM1,115200
-Timeout=30
 Default=ExectOS
+Modules=beep
+Timeout=30
+Tune=400 880 2 988 2 783 2 392 2 587 3
 
 [ExectOS]
 SystemName="ExectOS Operating System"
 SystemType=XTOS
+BootModules=pecoff xtos
 SystemPath=multi(0)disk(0)rdisk(0)partition(1)/ExectOS
 KernelFile=xtoskrnl.exe
 Parameters=DEBUG DEBUGPORT=COM1,115200
@@ -44,6 +48,7 @@ Parameters=/NOGUIBOOT /MININT
 [Linux]
 SystemName="GNU/Linux"
 SystemType=LINUX
+BootModules=elf linux
 SystemPath=multi(0)disk(0)rdisk(0)partition(3)/boot
 KernelFile=vmlinuz
 InitrdFile=initramfs.cpio.gz