Add support for WHPX accelerator on Windows and introduce OVMF Pure EFI firmware

boot/bootsect/CMakeLists.txt

@@ -1,8 +1,6 @@
 # XT Boot Sector
 PROJECT(BOOTSECT)
 
-add_definitions("-DARCH_ESP_SOURCE=\\\"${ARCH}/cpu.S\\\"")
-
 # Compile boot sectors
 compile_bootsector(mbrboot ${BOOTSECT_SOURCE_DIR}/mbrboot.S 0x7C00 Start)
 compile_bootsector(espboot ${BOOTSECT_SOURCE_DIR}/espboot.S 0x7C00 Start)

boot/bootsect/amd64/cpu.S

@@ -1,144 +0,0 @@
-/**
- * PROJECT:         ExectOS
- * COPYRIGHT:       See COPYING.md in the top level directory
- * FILE:            boot/bootsect/amd64/cpu.S
- * DESCRIPTION:     Low-level support for CPU initialization
- * DEVELOPERS:      Aiken Harris <harraiken91@gmail.com>
- */
-
-
-BuildPageMap:
-    /* Generate page map for first 1GB of memory */
-    pushaw
-    pushw %es
-    cld
-    movw $(0x1000 / 16), %ax
-    movw %ax, %es
-    xorw %di, %di
-    movl $(0x2000 | 0x07), %eax
-    stosl
-    xorl %eax, %eax
-    movw $1021, %cx
-    rep stosl
-    movw $(0x2000 / 16), %ax
-    movw %ax, %es
-    xorw %di, %di
-    movl $(0x3000 | 0x07), %eax
-    stosl
-    xorl %eax, %eax
-    movw $1021, %cx
-    rep stosl
-    movw $(0x3000 / 16), %ax
-    movw %ax, %es
-    xorw %di, %di
-    movw $512, %cx
-    movl $0x00000083, %eax
-.BuildPageMapLoop:
-    /* Identity map 512 pages of 2MB */
-    movl %eax, %es:(%di)
-    addl $2097152, %eax
-    addw $0x08, %di
-    loop .BuildPageMapLoop
-    popw %es
-    popaw
-    ret
-
-InitializeCpu:
-    /* Check if CPU supports CPUID, long mode and PAE */
-    pushal
-    pushfl
-    popl %eax
-    movl %eax, %ebx
-    xorl $0x00200000, %eax
-    pushl %eax
-    popfl
-    pushfl
-    popl %eax
-    cmpl %ebx, %eax
-    je CpuUnsupported
-    movl $0x01, %eax
-    cpuid
-    testl $0x40, %edx
-    jz CpuUnsupported
-    movl $0x80000000, %eax
-    cpuid
-    cmpl $0x80000000, %eax
-    jbe CpuUnsupported
-    movl $0x80000001, %eax
-    cpuid
-    testl $0x20000000, %edx
-    jz CpuUnsupported
-    popal
-    call LoadGdt
-    ret
-
-LoadGdt:
-    /* Load Global Descriptor Table */
-    lgdt .GdtPointer
-    ret
-
-RunStage2:
-    /* Switch to long mode and pass control to Stage 2 */
-    call BuildPageMap
-    call ParseExecutableHeader
-    xorl %edx, %edx
-    pushl %edx
-    pushl %eax
-    cli
-    xorw %ax, %ax
-    movw %ax, %ds
-    movw %ax, %es
-    movw %ax, %fs
-    movw %ax, %gs
-    movw %ax, %ss
-    movl %cr4, %eax
-    orl $0x00A0, %eax
-    movl %eax, %cr4
-    movl $0x00001000, %eax
-    movl %eax, %cr3
-    movl $0xC0000080, %ecx
-    rdmsr
-    orl $0x00000100, %eax
-    wrmsr
-    movl %cr0, %eax
-    orl $0x80000001, %eax
-    movl %eax, %cr0
-    ljmp $0x10, $.Stage2LongMode
-.code64
-.Stage2LongMode:
-    /* Set segments and stack, then jump to Stage 2 */
-    movw $0x18, %ax
-    movw %ax, %ds
-    movw %ax, %es
-    movw %ax, %ss
-    xorw %ax, %ax
-    movw %ax, %fs
-    movw %ax, %gs
-    popq %rax
-    xorq %rbx, %rbx
-    xorq %rcx, %rcx
-    xorq %rdx, %rdx
-    xorq %rsi, %rsi
-    xorq %rdi, %rdi
-    xorq %rbp, %rbp
-    jmp *%rax
-
-.code16
-.GdtDescriptor:
-    /* Global Descriptor Table */
-    .quad 0x0000000000000000
-    .quad 0x0000000000000000
-    .quad 0x00AF9A000000FFFF
-    .quad 0x00CF92000000FFFF
-    .quad 0x00009E000000FFFF
-    .quad 0x000092000000FFFF
-    .quad 0x00CF9B000000FFFF
-
-.GdtPointer:
-    /* Pointer to Global Descriptor Table */
-    .word .GdtPointer - .GdtDescriptor - 1
-    .long .GdtDescriptor
-
-.Stage2FileName:
-    /* Name of Stage 2 executable file */
-    .ascii "BOOTX64 EFI"

boot/bootsect/espboot.S

@@ -121,15 +121,15 @@ VerifyBiosParameterBlock:
     ja FsError
 
 ReadExtraCode:
-    /* Read second VBR sector with extra boot code (3 sectors starting from sector 2) */
+    /* Read second VBR sector with extra boot code */
     movl HiddenSectors - Start(%bp), %eax
     addl $0x02, %eax
-    movw $0x03, %cx
+    movw $0x01, %cx
     xorw %bx, %bx
     movw %bx, %es
     movw $0x7E00, %bx
     call ReadSectors
-    jmp StartExtraCode
+    jmp StartSectors
 
 ReadSectors:
     /* Check for extended BIOS functions and use it only if available */
@@ -139,23 +139,19 @@ ReadSectors:
     movw $0x55AA, %bx
     movb DriveNumber - Start(%bp), %dl
     int $0x13
-    jc .ReadCHS
+    jc ReadCHS
     cmpw $0xAA55, %bx
-    jne .ReadCHS
+    jne ReadCHS
     testb $0x01, %cl
-    jz .ReadCHS
+    jz ReadCHS
 
     /* Verify drive size and determine whether to use CHS or LBA */
     cmpl %edi, %eax
-    jnb .ReadLBA
+    jnb ReadLBA
 
-.ReadCHS:
+ReadCHS:
     /* Read sectors using CHS */
     popal
-
-.CHSLoop:
-    /* Read sector by sector using CHS */
-    pushw %cx
     pushal
     xorl %edx, %edx
     movzwl SectorsPerTrack - Start(%bp), %ecx
@@ -173,18 +169,17 @@ ReadSectors:
     orb %ah, %cl
     movw $0x0201, %ax
     int $0x13
-    popal
-    popw %cx
     jc DiskError
+    popal
     incl %eax
     movw %es, %dx
     addw $0x20, %dx
     movw %dx, %es
-    loop .CHSLoop
+    loop ReadCHS
     popw %es
     ret
 
-.ReadLBA:
+ReadLBA:
     /* Prepare DAP packet and read sectors using LBA */
     popal
     pushw %cx
@@ -213,19 +208,19 @@ ReadSectors:
     movw %dx, %es
     popw %bx
     subw %si, %cx
-    jnz .ReadLBA
+    jnz ReadLBA
     popw %es
     ret
 
 DiskError:
     /* Display disk error message and reboot */
-    movw $.MsgDiskError, %si
+    movw $msgDiskError, %si
     call Print
     jmp Reboot
 
 FsError:
     /* Display FS error message and reboot */
-    movw $.MsgFsError, %si
+    movw $msgFsError, %si
     call Print
     jmp Reboot
 
@@ -233,297 +228,48 @@ Print:
     /* Simple routine to print messages */
     lodsb
     orb     %al, %al
-    jz      .DonePrint
+    jz      DonePrint
     movb    $0x0E, %ah
     movw    $0x07, %bx
     int     $0x10
     jmp     Print
-.DonePrint:
+DonePrint:
     retw
 
 Reboot:
     /* Display a message, wait for a key press and reboot */
-    movw $.MsgAnyKey, %si
+    movw $msgAnyKey, %si
     call Print
     xorw %ax, %ax
     int $0x16
     int $0x19
 
-.MsgAnyKey:
+msgAnyKey:
-    .ascii "Press any key to restart...\r\n\0"
+    .ascii "Press any key to restart\r\n"
 
-.MsgDiskError:
+msgDiskError:
-    .ascii "Disk error!\r\n\0"
+    .ascii "Disk error\r\n"
 
-.MsgFsError:
+msgFsError:
-    .ascii "File system error!\r\n\0"
+    .ascii "File system error\r\n"
 
 /* Fill the rest of the VBR with zeros and add VBR signature at the end */
 .fill (510 - (. - Start)), 1, 0
 .word 0xAA55
 
 
-StartExtraCode:
+StartSectors:
-    /* Load XTLDR file from disk */
+    /* Print message */
-    call LoadStage2
+    movw $msgUnavailable, %si
-
-    /* Enable A20 gate */
-    call EnableA20
-
-    /* Call architecture specific initialization code */
-    call InitializeCpu
-
-    /* Jump to Stage2 */
-    call RunStage2
-
-Clear8042:
-    /* Clear 8042 PS/2 buffer */
-    nop
-    nop
-    nop
-    nop
-    inb $0x64, %al
-    cmpb $0xff, %al
-    je .Clear8042_Done
-    testb $0x02, %al
-    jnz Clear8042
-.Clear8042_Done:
-    ret
-
-EnableA20:
-    /* Enable A20 gate */
-    pushaw
-    call Clear8042
-    movb $0xD1, %al
-    outb %al, $0x64
-    call Clear8042
-    movb $0xDF, %al
-    outb %al, $0x60
-    call Clear8042
-    movb $0xFF, %al
-    outb %al, $0x64
-    call Clear8042
-    popaw
-    ret
-
-FindFatEntry:
-    /* Find a file or directory in the FAT table */
-    pushw %bx
-    pushw %cx
-    pushw %dx
-    pushw %si
-    pushw %di
-.FindFatCluster:
-    /* Find FAT32 cluster holding the entry */
-    cmp $0x0FFFFFF8, %eax
-    jae .FindEntryFail
-    pushl %eax
-    movw $0x0200, %bx
-    movw %bx, %es
-    call ReadCluster
-    popl %eax
-    movb SectorsPerCluster - Start(%bp), %cl
-    shlw $0x04, %cx
-    xorw %di, %di
-.FindEntryLoop:
-    /* Find the entry */
-    movb %es:(%di), %al
-    cmpb $0x00, %al
-    je .FindEntryFail
-    cmpb $0xE5, %al
-    je .FindSkipEntry
-    movb %es:0x0B(%di), %ah
-    cmpb $0x0F, %ah
-    je .FindSkipEntry
-    pushw %di
-    pushw %si
-    pushw %cx
-    movw $0x0B, %cx
-    repe cmpsb
-    popw %cx
-    popw %si
-    popw %di
-    jnz .FindSkipEntry
-    movw %es:0x1A(%di), %ax
-    movw %es:0x14(%di), %dx
-    shll $0x10, %edx
-    orl %edx, %eax
-    clc
-    jmp .FindEntryDone
-.FindSkipEntry:
-    /* Skip to the next entry */
-    addw $0x20, %di
-    decw %cx
-    jnz .FindEntryLoop
-    call GetFatEntry
-    jmp .FindFatCluster
-.FindEntryFail:
-    /* Error, file/directory not found */
-    stc
-.FindEntryDone:
-    /* Clean up the stack */
-    popw %di
-    popw %si
-    popw %dx
-    popw %cx
-    popw %bx
-    ret
-
-GetFatEntry:
-    /* Get FAT32 sector and offset from FAT table */
-    shll $0x02, %eax
-    movl %eax, %ecx
-    xorl %edx, %edx
-    movzwl BytesPerSector - Start(%bp), %ebx
-    pushl %ebx
-    divl %ebx
-    movzwl ReservedSectors - Start(%bp), %ebx
-    addl %ebx, %eax
-    movl HiddenSectors - Start(%bp), %ebx
-    addl %ebx, %eax
-    popl %ebx
-    decl %ebx
-    andl %ebx, %ecx
-    movzwl ExtendedFlags - Start(%bp), %ebx
-    andw $0x0F, %bx
-    jz LoadFatSector
-    cmpb FatCopies - Start(%bp), %bl
-    jae FsError
-    pushl %eax
-    movl BigSectorsPerFat - Start(%bp), %eax
-    mull %ebx
-    popl %edx
-    addl %edx, %eax
-
-LoadFatSector:
-    /* Load FAT32 sector from disk */
-    pushl %ecx
-    movw $0x9000, %bx
-    movw %bx, %es
-    cmpl %esi, %eax
-    je .LoadFatSectorDone
-    movl %eax, %esi
-    xorw %bx, %bx
-    movw $0x01, %cx
-    call ReadSectors
-.LoadFatSectorDone:
-    /* Clean up the stack */
-    popl %ecx
-    movl %es:(%ecx), %eax
-    andl $0x0FFFFFFF, %eax
-    ret
-
-LoadStage2:
-    /* Load Stage2 executable, first find file in the path */
-    movl $0xFFFFFFFF, %esi
-    pushl %esi
-    movl 0x7C2C, %eax
-    movw $.EfiDirName, %si
-    call FindFatEntry
-    jc Stage2NotLoaded
-    movw $.BootDirName, %si
-    call FindFatEntry
-    jc Stage2NotLoaded
-    movw $.Stage2FileName, %si
-    call FindFatEntry
-    jc Stage2NotLoaded
-    popl %esi
-    /* Load XTLDR file from disk */
-    cmpl $0x02, %eax
-    jb FileNotFound
-    cmpl $0x0FFFFFF8, %eax
-    jae FileNotFound
-    movw $(0xF800 / 16), %bx
-    movw %bx, %es
-.LoadStage2Loop:
-    /* Load file data from disk */
-    pushl %eax
-    xorw %bx, %bx
-    pushw %es
-    call ReadCluster
-    popw %es
-    xorw %bx, %bx
-    movb SectorsPerCluster - Start(%bp), %bl
-    shlw $0x05, %bx
-    movw %es, %ax
-    addw %bx, %ax
-    movw %ax, %es
-    popl %eax
-    pushw %es
-    call GetFatEntry
-    popw %es
-    cmpl $0x0FFFFFF8, %eax
-    jb .LoadStage2Loop
-    ret
-
-ParseExecutableHeader:
-    /* Parse Stage2 PE/COFF executable header */
-    pushw %es
-    movw $(0xF800 / 16), %ax
-    movw %ax, %es
-    movl %es:60, %eax
-    addl $(4 + 20), %eax
-    movl %es:16(%eax), %eax
-    addl $0xF800, %eax
-    popw %es
-    ret
-
-ReadCluster:
-    /* Read FAT32 cluster from disk */
-    decl %eax
-    decl %eax
-    xorl %edx, %edx
-    movzbl SectorsPerCluster - Start(%bp), %ebx
-    mull %ebx
-    pushl %eax
-    xorl %edx, %edx
-    movzbl FatCopies - Start(%bp), %eax
-    mull BigSectorsPerFat - Start(%bp)
-    movzwl ReservedSectors - Start(%bp), %ebx
-    addl %ebx, %eax
-    addl HiddenSectors - Start(%bp), %eax
-    popl %ebx
-    addl %ebx, %eax
-    xorw %bx, %bx
-    movzbw SectorsPerCluster - Start(%bp), %cx
-    call ReadSectors
-    ret
-
-/* Include architecture specific code */
-.include ARCH_ESP_SOURCE
-
-CpuUnsupported:
-    /* Display CPU unsupported message and reboot */
-    popal
-    movw $.MsgCpuUnsupported, %si
     call Print
-    jmp Reboot
 
-FileNotFound:
+    /* Wait for key press and reboot */
-    /* Display XTLDR not found message and reboot */
+    xorw %ax, %ax
-    movw $.MsgXtLdrNotFound, %si
+    int $0x16
-    call Print
+    int $0x19
-    jmp Reboot
 
-Stage2NotLoaded:
+msgUnavailable:
-    /* Clean up the stack and display XTLDR not found message and reboot */
+    .ascii "XTLDR requires EFI-based system!\r\nPress any key to restart\r\n"
-    popl %esi
-    jmp FileNotFound
 
-.BootDirName:
+/* Fill the rest of the extra VBR with zeros */
-    /* Boot directory name */
+.fill (1024 - (. - Start)), 1, 0
-    .ascii "BOOT       "
-
-.EfiDirName:
-    /* EFI directory name */
-    .ascii "EFI        "
-
-.MsgCpuUnsupported:
-    .ascii "CPU not supported!\r\n\0"
-
-.MsgXtLdrNotFound:
-    .ascii "XTLDR Stage2 not found!\r\n\0"
-
-/* Fill the rest of the extra VBR with zeros and add signature */
-.fill (2043 - (. - Start)), 1, 0
-.ascii "XTLDR"

boot/bootsect/i686/cpu.S

@@ -1,124 +0,0 @@
-/**
- * PROJECT:         ExectOS
- * COPYRIGHT:       See COPYING.md in the top level directory
- * FILE:            boot/bootsect/i686/cpu.S
- * DESCRIPTION:     Low-level support for CPU initialization
- * DEVELOPERS:      Aiken Harris <harraiken91@gmail.com>
- */
-
-
-BuildPageMap:
-    /* Generate page map for first 16MB of memory */
-    pushaw
-    pushw %es
-    cld
-    movw $(0x1000 >> 0x04), %ax
-    movw %ax, %es
-    xorw %di, %di
-    movl $(0x2000 | 0x03), %eax
-    stosl
-    movl $(0x3000 | 0x03), %eax
-    stosl
-    movl $(0x4000 | 0x03), %eax
-    stosl
-    movl $(0x5000 | 0x03), %eax
-    stosl
-    xorl %eax, %eax
-    movw $(1024 - 4), %cx
-    rep stosl
-    movl $0x00000003, %eax
-    movl $4, %edx
-    movw $(0x2000 >> 0x04), %bx
-.BuildPageMapLoop:
-    /* Identity map 1024 pages of 4KB */
-    movw %bx, %es
-    xorw %di, %di
-    pushl %edx
-    movw $1024, %cx
-.FillPageMapTable:
-    /* Fill the page table */
-    movl %eax, %es:(%di)
-    addl $4096, %eax
-    addw $0x04, %di
-    loop .FillPageMapTable
-    popl %edx
-    addw $(0x1000 >> 0x04), %bx
-    decl %edx
-    jnz .BuildPageMapLoop
-    popw %es
-    popaw
-    ret
-
-InitializeCpu:
-    /* Check if CPU supports CPUID */
-    pushal
-    pushfl
-    popl %eax
-    movl %eax, %ebx
-    xorl $0x00200000, %eax
-    pushl %eax
-    popfl
-    pushfl
-    popl %eax
-    cmpl %ebx, %eax
-    je CpuUnsupported
-    popal
-    call LoadGdt
-    ret
-
-LoadGdt:
-    /* Load Global Descriptor Table */
-    lgdt .GdtPointer
-    ret
-
-RunStage2:
-    /* Switch to protected mode and pass control to Stage 2 */
-    call BuildPageMap
-    call ParseExecutableHeader
-    pushl %eax
-    cli
-    movl %cr0, %eax
-    orl $0x01, %eax
-    movl %eax, %cr0
-    ljmp $0x08, $.Stage2ProtectedMode
-.code32
-.Stage2ProtectedMode:
-    /* Set segments and stack, then jump to Stage 2 */
-    movw $0x10, %ax
-    movw %ax, %ds
-    movw %ax, %es
-    movw %ax, %ss
-    xorw %ax, %ax
-    movw %ax, %fs
-    movw %ax, %gs
-    popl %eax
-    xorl %ebx, %ebx
-    xorl %ecx, %ecx
-    xorl %edx, %edx
-    xorl %esi, %esi
-    xorl %edi, %edi
-    xorl %ebp, %ebp
-    movl $0x1000, %ebx
-    movl %ebx, %cr3
-    movl %cr0, %ebx
-    orl $0x80000000, %ebx
-    movl %ebx, %cr0
-    jmp *%eax
-
-.code16
-.GdtDescriptor:
-    /* Global Descriptor Table */
-    .quad 0x0000000000000000
-    .quad 0x00CF9A000000FFFF
-    .quad 0x00CF92000000FFFF
-    .quad 0x00009E000000FFFF
-    .quad 0x000092000000FFFF
-
-.GdtPointer:
-    /* Pointer to Global Descriptor Table */
-    .word .GdtPointer - .GdtDescriptor - 1
-    .long .GdtDescriptor
-
-.Stage2FileName:
-    /* Name of Stage 2 executable file */
-    .ascii "BOOTIA32EFI"

boot/bootsect/mbrboot.S

@@ -4,7 +4,6 @@
  * FILE:            boot/bootsect/amd64/mbrboot.S
  * DESCRIPTION:     XT Boot Loader MBR boot code
  * DEVELOPERS:      Rafal Kupiec <belliash@codingworkshop.eu.org>
- *                  Aiken Harris <aiken@codingworkshop.eu.org>
  */
 
 .text
@@ -42,7 +41,7 @@ RealStart:
     movw %ax, %ss
 
     /* Print welcome message */
-    leaw .MsgXtosBoot, %si
+    leaw msgXtosBoot, %si
     call Print
 
     /* Get BIOS boot drive and partition table offset */
@@ -91,19 +90,19 @@ PartitionFound:
 
 InvalidSignature:
     /* Invalid signature error */
-    leaw .MsgInvalidSignature, %si
+    leaw msgInvalidSignature, %si
     call Print
     jmp HaltSystem
 
 PartitionNotFound:
     /* Active partition not found error */
-    leaw .MsgPartitionNotFound, %si
+    leaw msgPartitionNotFound, %si
     call Print
     jmp HaltSystem
 
 VbrReadFail:
     /* VBR read failed error */
-    leaw .MsgVbrReadFail, %si
+    leaw msgVbrReadFail, %si
     call Print
     jmp HaltSystem
 
@@ -137,16 +136,16 @@ DonePrint:
     /* Storage for the LBA start */
     .long 0
 
-.MsgInvalidSignature:
+msgInvalidSignature:
     .asciz "Invalid partition signature!"
 
-.MsgPartitionNotFound:
+msgPartitionNotFound:
     .asciz "Bootable partition not found!"
 
-.MsgVbrReadFail:
+msgVbrReadFail:
     .asciz "VBR read failed!"
 
-.MsgXtosBoot:
+msgXtosBoot:
     .asciz "Starting XTOS boot loader...\r\n"
 
 /* Fill the rest of the MBR with zeros and add MBR signature at the end */

boot/xtldr/CMakeLists.txt

@@ -16,7 +16,6 @@ list(APPEND LIBXTLDR_SOURCE
 # Specify list of source code files
 list(APPEND XTLDR_SOURCE
     ${XTLDR_SOURCE_DIR}/arch/${ARCH}/memory.cc
-    ${XTLDR_SOURCE_DIR}/biosutil.cc
     ${XTLDR_SOURCE_DIR}/bootutil.cc
     ${XTLDR_SOURCE_DIR}/config.cc
     ${XTLDR_SOURCE_DIR}/console.cc
@@ -39,9 +38,6 @@ add_executable(xtldr ${XTLDR_SOURCE})
 # Add linker libraries
 target_link_libraries(xtldr libxtos)
 
-# Add linker options
-target_link_options(xtldr PRIVATE /ALIGN:512)
-
 # Set proper binary name and install target
 if(ARCH STREQUAL "i686")
 	set(BINARY_NAME "bootia32")
@@ -53,6 +49,5 @@ set_install_target(xtldr efi/boot)
 
 # Set loader entrypoint and subsystem
 set_entrypoint(xtldr "BlStartXtLoader")
-set_imagebase(xtldr ${BASEADDRESS_XTLDR})
 set_linker_map(xtldr TRUE)
 set_subsystem(xtldr efi_application)

boot/xtldr/biosutil.cc

@@ -1,190 +0,0 @@
-/**
- * PROJECT:         ExectOS
- * COPYRIGHT:       See COPYING.md in the top level directory
- * FILE:            xtldr/biosutil.cc
- * DESCRIPTION:     Legacy BIOS support
- * DEVELOPERS:      Aiken Harris <harraiken91@gmail.com>
- */
-
-#include <xtldr.hh>
-
-
-/**
- * Clears the entire screen and moves the cursor to the top-left corner.
- *
- * @return This routine does not return any value.
- *
- * @since XT 1.0
- */
-XTCDECL
-VOID
-BiosUtils::ClearScreen()
-{
-    VOLATILE PUSHORT VgaBuffer = (PUSHORT)0xB8000;
-    USHORT Blank;
-    UINT Index;
-
-    /* Set blank character */
-    Blank = (0x0F << 8) | L' ';
-
-    /* Fill the entire screen with blank characters */
-    for(Index = 0; Index < VgaWidth * VgaHeight; Index++)
-    {
-        VgaBuffer[Index] = Blank;
-    }
-
-    /* Reset cursor position to the top-left corner */
-    CursorX = 0;
-    CursorY = 0;
-
-    /* Update the hardware cursor position */
-    UpdateCursor();
-}
-
-/**
- * Formats the input string and prints it out to the screen.
- *
- * @param Format
- *        The formatted string that is to be written to the output.
- *
- * @param ...
- *        Depending on the format string, this routine might expect a sequence of additional arguments.
- *
- * @return This routine does not return any value.
- *
- * @since XT 1.0
- */
-XTCDECL
-VOID
-BiosUtils::Print(IN PCWSTR Format,
-                 IN ...)
-{
-    RTL_PRINT_CONTEXT PrintContext;
-    VA_LIST Arguments;
-
-    /* Initialise the print contexts */
-    PrintContext.WriteWideCharacter = PutChar;
-
-    /* Initialise the va_list */
-    VA_START(Arguments, Format);
-
-    /* Format and print the string to the stdout */
-    RTL::WideString::FormatWideString(&PrintContext, (PWCHAR)Format, Arguments);
-
-    /* Clean up the va_list */
-    VA_END(Arguments);
-}
-
-/**
- * Writes a single wide character to the screen using legacy BIOS VGA text mode.
- *
- * @param Character
- *        The wide character to be printed.
- *
- * @return This routine returns a status code.
- *
- * @since XT 1.0
- */
-XTCDECL
-XTSTATUS
-BiosUtils::PutChar(IN WCHAR Character)
-{
-    VOLATILE PUSHORT VgaBuffer = (PUSHORT)0xB8000;
-    USHORT VgaCharacter;
-
-    /* Handle special characters */
-    if(Character == L'\n')
-    {
-        /* Move to the next line */
-        CursorX = 0;
-        CursorY++;
-    }
-    else if(Character == L'\r')
-    {
-        /* Move to the beginning of the current line */
-        CursorX = 0;
-    }
-    else
-    {
-        /* Print character and move cursor to the right */
-        VgaCharacter = (0x0F << 8) | (Character & 0xFF);
-        VgaBuffer[CursorY * VgaWidth + CursorX] = VgaCharacter;
-        CursorX++;
-    }
-
-    /* Handle moving to the next line if cursor is at the end of the line */
-    if(CursorX >= VgaWidth)
-    {
-        CursorX = 0;
-        CursorY++;
-    }
-
-    /* Handle scrolling if cursor is at the end of the screen */
-    if(CursorY >= VgaHeight)
-    {
-        ScrollScreen();
-        CursorY = VgaHeight - 1;
-    }
-
-    /* Update the hardware cursor position */
-    UpdateCursor();
-
-    /* Return success */
-    return STATUS_EFI_SUCCESS;
-}
-
-/**
- * Scrolls the entire screen content up by one line and clears the last line.
- *
- * @return This routine does not return any value.
- *
- * @since XT 1.0
- */
-XTCDECL
-VOID
-BiosUtils::ScrollScreen()
-{
-    VOLATILE PUSHORT VgaBuffer = (PUSHORT)0xB8000;
-    USHORT Blank;
-    UINT Index;
-
-    /* Set blank character */
-    Blank = (0x0F << 8) | L' ';
-
-    /* Move every line up by one */
-    for(Index = 0; Index < (VgaHeight - 1) * VgaWidth; Index++)
-    {
-        VgaBuffer[Index] = VgaBuffer[Index + VgaWidth];
-    }
-
-    /* Clear the last line */
-    for(Index = (VgaHeight - 1) * VgaWidth; Index < VgaHeight * VgaWidth; Index++)
-    {
-        VgaBuffer[Index] = Blank;
-    }
-}
-
-/**
- * Updates the hardware cursor position on the screen.
- *
- * @return This routine does not return any value.
- *
- * @since XT 1.0
- */
-XTCDECL
-VOID
-BiosUtils::UpdateCursor()
-{
-    USHORT Position;
-
-    /* Calculate cursor position */
-    Position = CursorY * VgaWidth + CursorX;
-
-    /* Send command to set the high byte of the cursor position */
-    HL::IoPort::WritePort8(0x3D4, 0x0E);
-    HL::IoPort::WritePort8(0x3D5, (UCHAR)((Position >> 8) & 0xFF));
-
-    /* Send command to set the low byte of the cursor position */
-    HL::IoPort::WritePort8(0x3D4, 0x0F);
-    HL::IoPort::WritePort8(0x3D5, (UCHAR)(Position & 0xFF));
-}

boot/xtldr/data.cc

@@ -10,18 +10,6 @@
 #include <xtldr.hh>
 
 
-/* Legacy BIOS cursor X position */
-USHORT BiosUtils::CursorX = 0;
-
-/* Legacy BIOS cursor Y position */
-USHORT BiosUtils::CursorY = 0;
-
-/* Legacy BIOS screen height */
-CONST USHORT BiosUtils::VgaHeight = 25;
-
-/* Legacy BIOS screen width */
-CONST USHORT BiosUtils::VgaWidth = 80;
-
 /* XT Boot Loader menu list */
 PLIST_ENTRY Configuration::BootMenuList = NULLPTR;
 

boot/xtldr/includes/xtldr.hh

@@ -15,25 +15,6 @@
 #include <libxtos.hh>
 
 
-class BiosUtils
-{
-    private:
-        STATIC USHORT CursorX;
-        STATIC USHORT CursorY;
-        STATIC CONST USHORT VgaHeight;
-        STATIC CONST USHORT VgaWidth;
-
-    public:
-        STATIC XTCDECL VOID ClearScreen();
-        STATIC XTCDECL VOID Print(IN PCWSTR Format,
-                                  IN ...);
-        STATIC XTCDECL XTSTATUS PutChar(IN WCHAR Character);
-
-    private:
-        STATIC XTCDECL VOID ScrollScreen();
-        STATIC XTCDECL VOID UpdateCursor();
-};
-
 class BootUtils
 {
     public:

boot/xtldr/xtldr.cc

@@ -236,15 +236,6 @@ BlStartXtLoader(IN EFI_HANDLE ImageHandle,
     PWCHAR Modules;
     EFI_STATUS Status;
 
-    /* Check if system is EFI-based and provided parameters are valid */
-    if(ImageHandle == NULLPTR || SystemTable == NULLPTR)
-    {
-        /* Invalid parameters, print error message using BIOS calls and hang */
-        BiosUtils::ClearScreen();
-        BiosUtils::Print(L"XTLDR requires EFI-based system!");
-        for(;;);
-    }
-
     /* Initialize XTLDR and */
     XtLoader::InitializeBootLoader(ImageHandle, SystemTable);
 

configure.ps1

@@ -4,41 +4,48 @@
 # DESCRIPTION: Project configuration script for preparing the build environment
 # DEVELOPERS:  Aiken Harris <harraiken91@gmail.com>
 
+
 # Check XTchain
 if (-not $env:XTCVER) {
-    Write-Error "XTChain not detected or corrupted!"
+    Write-Host "XTChain not detected or corrupted!"
     exit 1
 }
 
-# Set target architecture defaulting to amd64
+# Set target architecture
-$ARCH = if ($env:TARGET) { $env:TARGET } else { "amd64" }
+if ($env:TARGET) {
-
+    $ARCH = $env:TARGET
-# Set target build type defaulting to Debug
+} else {
-$env:BUILD_TYPE = if ($env:BUILD_TYPE -in @("Debug", "Release")) { $env:BUILD_TYPE } else { "Debug" }
+    $ARCH = "amd64"
-
-# Set variables
-$EXECTOS_SOURCE_DIR = $PSScriptRoot
-$EXECTOS_BINARY_DIR = Join-Path $EXECTOS_SOURCE_DIR "build-$ARCH-$($env:BUILD_TYPE.ToLower())"
-
-# Create build directory
-if (-not (Test-Path $EXECTOS_BINARY_DIR)) {
-    Write-Host "Creating build directory: $EXECTOS_BINARY_DIR"
-    New-Item -ItemType Directory -Path $EXECTOS_BINARY_DIR -Force | Out-Null
 }
 
-Set-Location $EXECTOS_BINARY_DIR
+# Set target build type
+if (-not $env:BUILD_TYPE) {
+    $env:BUILD_TYPE = "DEBUG"
+}
+
+# Set variables
+$EXECTOS_SOURCE_DIR = (Get-Location).Path
+$EXECTOS_BINARY_DIR = "build-$($ARCH)-$($env:BUILD_TYPE.ToLower())"
+
+# Create directories if needed
+if ($EXECTOS_SOURCE_DIR -eq (Get-Location).Path) {
+    Write-Host "Creating directories in $EXECTOS_BINARY_DIR"
+    New-Item -ItemType Directory -Path $EXECTOS_BINARY_DIR -Force | Out-Null
+    Set-Location -Path $EXECTOS_BINARY_DIR
+}
 
 # Delete old cache
-Remove-Item "CMakeCache.txt", "host-tools/CMakeCache.txt" -ErrorAction SilentlyContinue
+Remove-Item -Path "CMakeCache.txt" -ErrorAction SilentlyContinue
+Remove-Item -Path "host-tools/CMakeCache.txt" -ErrorAction SilentlyContinue
 
 # Configure project using CMake
-& cmake -G Ninja "-DARCH:STRING=$ARCH" "-DBUILD_TYPE:STRING=$($env:BUILD_TYPE)" $EXECTOS_SOURCE_DIR
+& cmake -G Ninja -DARCH:STRING=$($ARCH) -DBUILD_TYPE:STRING=$($env:BUILD_TYPE) $EXECTOS_SOURCE_DIR
 
 # Check if configuration succeeded
 if ($LASTEXITCODE -ne 0) {
-    Write-Error "Configure script failed."
+    Write-Host "Configure script failed."
     exit 1
+} else {
+    "$($ARCH)" | Out-File -Encoding ASCII -NoNewline build.arch
+    Write-Host "Configure script completed. Enter '$EXECTOS_BINARY_DIR' directory and execute 'xbuild' to build ExectOS."
 }
-
-$ARCH | Out-File -Encoding ASCII -NoNewline "build.arch"
-Write-Host "Configure completed. Run 'xbuild' to build ExectOS."

sdk/cmake/baseaddress/amd64.cmake

@@ -1,3 +1,2 @@
 # Set base addresses for all modules
-set(BASEADDRESS_XTLDR    0x000000000000F800)
 set(BASEADDRESS_XTOSKRNL 0x0000000140000000)

sdk/cmake/baseaddress/i686.cmake

@@ -1,3 +1,2 @@
 # Set base addresses for all modules
-set(BASEADDRESS_XTLDR    0x0000F800)
 set(BASEADDRESS_XTOSKRNL 0x00400000)

sdk/cmake/emulation.cmake

@@ -23,57 +23,49 @@ endif()
 
 find_program(QEMU_EMULATOR ${QEMU_COMMAND})
 if(QEMU_EMULATOR)
-    if(CMAKE_HOST_LINUX)
+    # This target starts up a QEMU+OVMF virtual machine using KVM accelerator
-        # This target starts up a QEMU+OVMF virtual machine using KVM accelerator
+    add_custom_target(testefikvm
-        add_custom_target(testefikvm
+                      DEPENDS install
-                          DEPENDS install
+                      COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-KVM" -machine type=q35,kernel_irqchip=on,accel="kvm:whpx",mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
-                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-KVM" -machine type=q35,kernel_irqchip=on,accel=kvm,mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
+                                              -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                                  -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
+                                              -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_code_${ARCH}.fd,if=pflash,format=raw,unit=0,readonly=on
-                                                  -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
+                                              -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_vars_${ARCH}.fd,if=pflash,format=raw,unit=1
-                                                  -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
+                                              -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
-                                                  -boot menu=on -d int -M smm=off -no-reboot -no-shutdown -serial stdio
+                                              -boot menu=on -d int -M smm=off -no-reboot -no-shutdown -serial stdio
-                          VERBATIM USES_TERMINAL)
+                      VERBATIM USES_TERMINAL)
-    elseif(CMAKE_HOST_WIN32)
-        # This target starts up a QEMU+OVMF virtual machine using WHPX accelerator
-        add_custom_target(testefiwhpx
-                          DEPENDS install
-                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-WHPX" -machine type=q35,kernel_irqchip=off,accel=whpx,mem-merge=off,vmport=off
-                                                  -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                                  -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
-                                                  -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
-                                                  -boot menu=on -d int -M smm=off -no-reboot -no-shutdown -serial stdio
-                          VERBATIM USES_TERMINAL)
-    endif()
 
     # This target starts up a QEMU+OVMF virtual machine using TCG accelerator
     add_custom_target(testefitcg
                       DEPENDS install
                       COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-TCG" -machine type=q35,accel=tcg -cpu max,-hypervisor
                                               -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                              -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
+                                              -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_code_${ARCH}.fd,if=pflash,format=raw,unit=0,readonly=on
+                                              -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_vars_${ARCH}.fd,if=pflash,format=raw,unit=1
                                               -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
                                               -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
                       VERBATIM USES_TERMINAL)
 
-    if(CMAKE_HOST_LINUX)
+if(WIN32)
+        # This target starts up a QEMU+OVMF virtual machine using WHPX accelerator on Windows
+        add_custom_target(testkvm
+                        DEPENDS install
+                        COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-WHPX" -machine accel=whpx,kernel-irqchip=off 
+                            -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/OVMF-pure-efi.fd
+                            -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries 
+                            -no-reboot -no-shutdown -serial stdio
+                        COMMENT "Using WHPX acceleration on Windows"
+                        VERBATIM USES_TERMINAL)
+
+else()
         # This target starts up a QEMU+SEABIOS virtual machine using KVM accelerator
         add_custom_target(testkvm
-                          DEPENDS diskimg
+                        DEPENDS diskimg
-                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-KVM" -machine type=q35,kernel_irqchip=on,accel=kvm,mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
+                        COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-KVM" -machine type=q35,kernel_irqchip=on,accel="kvm:whpx",mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
-                                                  -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
+                                                -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                                  -hda ${EXECTOS_BINARY_DIR}/output/disk.img
+                                                -hda ${EXECTOS_BINARY_DIR}/output/disk.img
-                                                  -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
+                                                -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
-                          VERBATIM USES_TERMINAL)
+                        VERBATIM USES_TERMINAL)
-    elseif(CMAKE_HOST_WIN32)
+endif()
-        # This target starts up a QEMU+SEABIOS virtual machine using WHPX accelerator
-        add_custom_target(testwhpx
-                          DEPENDS diskimg
-                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-WHPX" -machine type=q35,kernel_irqchip=off,accel=whpx,mem-merge=off,vmport=off
-                                                  -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                                  -hda ${EXECTOS_BINARY_DIR}/output/disk.img
-                                                  -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
-                          VERBATIM USES_TERMINAL)
-    endif()
 
     # This target starts up a QEMU+SEABIOS virtual machine using TCG accelerator
     add_custom_target(testtcg

sdk/cmake/functions.cmake

@@ -64,17 +64,11 @@ function(compile_bootsector NAME SOURCE BASEADDR ENTRYPOINT)
     set(BINARY_NAME "${NAME}.bin")
     set(OBJECT_NAME "${NAME}.obj")
 
-    get_directory_property(DEFS COMPILE_DEFINITIONS)
-    foreach(def ${DEFS})
-        list(APPEND ASM_DEFS "-D${def}")
-    endforeach()
-
     add_custom_command(
         OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${BINARY_NAME}
         COMMAND ${CMAKE_ASM_COMPILER}
             /nologo
             --target=i386-none-elf
-            ${ASM_DEFS}
             -I${CMAKE_CURRENT_SOURCE_DIR}
             /Fo${CMAKE_CURRENT_BINARY_DIR}/${OBJECT_NAME}
             -c -- ${SOURCE}

sdk/xtdk/amd64/ketypes.h

@@ -272,18 +272,11 @@ typedef struct _KIDTENTRY
 {
     USHORT OffsetLow;
     USHORT Selector;
-    union
+    USHORT IstIndex:3;
-    {
+    USHORT Reserved0:5;
-        struct
+    USHORT Type:5;
-        {
+    USHORT Dpl:2;
-            USHORT IstIndex:3;
+    USHORT Present:1;
-            USHORT Reserved0:5;
-            USHORT Type:5;
-            USHORT Dpl:2;
-            USHORT Present:1;
-        };
-        USHORT Access;
-    };
     USHORT OffsetMiddle;
     ULONG OffsetHigh;
     ULONG Reserved1;

sdk/xtdk/i686/ketypes.h

@@ -58,6 +58,12 @@
 #define KIDT_ACCESS_RING0                 0x00
 #define KIDT_ACCESS_RING3                 0x60
 
+/* IDT gate types */
+#define KIDT_TASK                         0x05
+#define KIDT_CALL                         0x0C
+#define KIDT_INTERRUPT                    0x0E
+#define KIDT_TRAP                         0x0F
+
 /* TSS Offsets */
 #define KTSS_ESP0                         0x04
 #define KTSS_CR3                          0x1C
@@ -278,18 +284,7 @@ typedef struct _KIDTENTRY
 {
     USHORT Offset;
     USHORT Selector;
-    union
+    USHORT Access;
-    {
-        struct
-        {
-            UCHAR Reserved;
-            UCHAR Type:4;
-            UCHAR Flag:1;
-            UCHAR Dpl:2;
-            UCHAR Present:1;
-        };
-        USHORT Access;
-    };
     USHORT ExtendedOffset;
 } KIDTENTRY, *PKIDTENTRY;
 

sdk/xtdk/ketypes.h

@@ -150,23 +150,21 @@ typedef enum _KTHREAD_STATE
 typedef enum _KSPIN_LOCK_QUEUE_LEVEL
 {
     DispatcherLock,
-    ExpansionLock,
+    UnusedSpareLock,
     PfnLock,
     SystemSpaceLock,
     VacbLock,
     MasterLock,
-    NonPagedAllocPoolLock,
+    NonPagedPoolLock,
     IoCancelLock,
     WorkQueueLock,
     IoVpbLock,
     IoDatabaseLock,
     IoCompletionLock,
-    FileSystemLock,
+    FsStructLock,
     AfdWorkQueueLock,
     BcbLock,
-    NonPagedPoolLock,
+    MmNonPagedPoolLock,
-    ReservedSystemLock,
-    TimerTableLock,
     MaximumLock
 } KSPIN_LOCK_QUEUE_LEVEL, *PKSPIN_LOCK_QUEUE_LEVEL;
 

xtoskrnl/ar/amd64/procsup.cc

@@ -249,34 +249,34 @@ AR::ProcSup::InitializeIdt(IN PKPROCESSOR_BLOCK ProcessorBlock)
     for(Vector = 0; Vector < IDT_ENTRIES; Vector++)
     {
         /* Set the IDT to handle unexpected interrupts */
-        SetIdtGate(ProcessorBlock->IdtBase, Vector, (PVOID)ArTrap0xFF, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_INTERRUPT_GATE);
+        SetIdtGate(ProcessorBlock->IdtBase, Vector, (PVOID)ArTrap0xFF, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
     }
 
     /* Setup IDT handlers for known interrupts and traps */
-    SetIdtGate(ProcessorBlock->IdtBase, 0x00, (PVOID)ArTrap0x00, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x00, (PVOID)ArTrap0x00, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x01, (PVOID)ArTrap0x01, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x01, (PVOID)ArTrap0x01, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x02, (PVOID)ArTrap0x02, KGDT_R0_CODE, KIDT_IST_PANIC, KIDT_ACCESS_RING0, AMD64_INTERRUPT_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x02, (PVOID)ArTrap0x02, KGDT_R0_CODE, KIDT_IST_PANIC, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x03, (PVOID)ArTrap0x03, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING3, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x03, (PVOID)ArTrap0x03, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING3);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x04, (PVOID)ArTrap0x04, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING3, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x04, (PVOID)ArTrap0x04, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING3);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x05, (PVOID)ArTrap0x05, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x05, (PVOID)ArTrap0x05, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x06, (PVOID)ArTrap0x06, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x06, (PVOID)ArTrap0x06, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x07, (PVOID)ArTrap0x07, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x07, (PVOID)ArTrap0x07, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x08, (PVOID)ArTrap0x08, KGDT_R0_CODE, KIDT_IST_PANIC, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x08, (PVOID)ArTrap0x08, KGDT_R0_CODE, KIDT_IST_PANIC, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x09, (PVOID)ArTrap0x09, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x09, (PVOID)ArTrap0x09, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x0A, (PVOID)ArTrap0x0A, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x0A, (PVOID)ArTrap0x0A, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x0B, (PVOID)ArTrap0x0B, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x0B, (PVOID)ArTrap0x0B, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x0C, (PVOID)ArTrap0x0C, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x0C, (PVOID)ArTrap0x0C, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x0D, (PVOID)ArTrap0x0D, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x0D, (PVOID)ArTrap0x0D, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x0E, (PVOID)ArTrap0x0E, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x0E, (PVOID)ArTrap0x0E, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x10, (PVOID)ArTrap0x10, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x10, (PVOID)ArTrap0x10, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x11, (PVOID)ArTrap0x11, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x11, (PVOID)ArTrap0x11, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x12, (PVOID)ArTrap0x12, KGDT_R0_CODE, KIDT_IST_MCA, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x12, (PVOID)ArTrap0x12, KGDT_R0_CODE, KIDT_IST_MCA, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x13, (PVOID)ArTrap0x13, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x13, (PVOID)ArTrap0x13, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x1F, (PVOID)ArTrap0x1F, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_INTERRUPT_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x1F, (PVOID)ArTrap0x1F, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x2C, (PVOID)ArTrap0x2C, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING3, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x2C, (PVOID)ArTrap0x2C, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING3);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x2D, (PVOID)ArTrap0x2D, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING3, AMD64_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x2D, (PVOID)ArTrap0x2D, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING3);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x2F, (PVOID)ArTrap0x2F, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_INTERRUPT_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x2F, (PVOID)ArTrap0x2F, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0xE1, (PVOID)ArTrap0xE1, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0, AMD64_INTERRUPT_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0xE1, (PVOID)ArTrap0xE1, KGDT_R0_CODE, KIDT_IST_RESERVED, KIDT_ACCESS_RING0);
 }
 
 /**
@@ -636,9 +636,6 @@ AR::ProcSup::SetGdtEntryBase(IN PKGDTENTRY Gdt,
  * @param Access
  *        Supplies the gate access rights.
  *
- * @param Type
- *        Supplies the gate type.
- *
  * @return This routine does not return any value.
  *
  * @since XT 1.0
@@ -650,22 +647,15 @@ AR::ProcSup::SetIdtGate(IN PKIDTENTRY Idt,
                         IN PVOID Handler,
                         IN USHORT Selector,
                         IN USHORT Ist,
-                        IN USHORT Dpl,
+                        IN USHORT Access)
-                        IN USHORT Type)
 {
-    /* Set the handler's address */
+    /* Setup the gate */
     Idt[Vector].OffsetLow = ((ULONG_PTR)Handler & 0xFFFF);
     Idt[Vector].OffsetMiddle = (((ULONG_PTR)Handler >> 16) & 0xFFFF);
     Idt[Vector].OffsetHigh = (ULONG_PTR)Handler >> 32;
-
+    Idt[Vector].Dpl = Access;
-    /* Set the code segment selector */
-    Idt[Vector].Selector = Selector;
-
-    /* Initialize the gate's attributes and flags */
-    Idt[Vector].Access = 0;
-    Idt[Vector].Dpl = Dpl;
     Idt[Vector].IstIndex = Ist;
     Idt[Vector].Present = 1;
-    Idt[Vector].Reserved1 = 0;
+    Idt[Vector].Selector = Selector;
-    Idt[Vector].Type = Type;
+    Idt[Vector].Type = 0xE;
 }

xtoskrnl/ar/i686/procsup.cc

@@ -242,34 +242,34 @@ AR::ProcSup::InitializeIdt(IN PKPROCESSOR_BLOCK ProcessorBlock)
     for(Vector = 0; Vector < IDT_ENTRIES; Vector++)
     {
         /* Set the IDT to handle unexpected interrupts */
-        SetIdtGate(ProcessorBlock->IdtBase, Vector, (PVOID)ArTrap0xFF, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_INTERRUPT_GATE);
+        SetIdtGate(ProcessorBlock->IdtBase, Vector, (PVOID)ArTrap0xFF, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
     }
 
     /* Setup IDT handlers for known interrupts and traps */
-    SetIdtGate(ProcessorBlock->IdtBase, 0x00, (PVOID)ArTrap0x00, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x00, (PVOID)ArTrap0x00, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x01, (PVOID)ArTrap0x01, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x01, (PVOID)ArTrap0x01, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x02, (PVOID)ArTrap0x02, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_INTERRUPT_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x02, (PVOID)ArTrap0x02, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x03, (PVOID)ArTrap0x03, KGDT_R0_CODE, 0, KIDT_ACCESS_RING3, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x03, (PVOID)ArTrap0x03, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING3);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x04, (PVOID)ArTrap0x04, KGDT_R0_CODE, 0, KIDT_ACCESS_RING3, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x04, (PVOID)ArTrap0x04, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING3);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x05, (PVOID)ArTrap0x05, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x05, (PVOID)ArTrap0x05, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x06, (PVOID)ArTrap0x06, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x06, (PVOID)ArTrap0x06, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x07, (PVOID)ArTrap0x07, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x07, (PVOID)ArTrap0x07, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x08, (PVOID)ArTrap0x08, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x08, (PVOID)ArTrap0x08, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x09, (PVOID)ArTrap0x09, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x09, (PVOID)ArTrap0x09, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x0A, (PVOID)ArTrap0x0A, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x0A, (PVOID)ArTrap0x0A, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x0B, (PVOID)ArTrap0x0B, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x0B, (PVOID)ArTrap0x0B, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x0C, (PVOID)ArTrap0x0C, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x0C, (PVOID)ArTrap0x0C, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x0D, (PVOID)ArTrap0x0D, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x0D, (PVOID)ArTrap0x0D, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x0E, (PVOID)ArTrap0x0E, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x0E, (PVOID)ArTrap0x0E, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x10, (PVOID)ArTrap0x10, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x10, (PVOID)ArTrap0x10, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x11, (PVOID)ArTrap0x11, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x11, (PVOID)ArTrap0x11, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x12, (PVOID)ArTrap0x12, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x12, (PVOID)ArTrap0x12, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x13, (PVOID)ArTrap0x13, KGDT_R0_CODE, 0, KIDT_ACCESS_RING0, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x13, (PVOID)ArTrap0x13, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING0);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x2A, (PVOID)ArTrap0x2A, KGDT_R0_CODE, 0, KIDT_ACCESS_RING3, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x2A, (PVOID)ArTrap0x2A, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING3);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x2B, (PVOID)ArTrap0x2B, KGDT_R0_CODE, 0, KIDT_ACCESS_RING3, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x2B, (PVOID)ArTrap0x2B, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING3);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x2C, (PVOID)ArTrap0x2C, KGDT_R0_CODE, 0, KIDT_ACCESS_RING3, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x2C, (PVOID)ArTrap0x2C, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING3);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x2D, (PVOID)ArTrap0x2D, KGDT_R0_CODE, 0, KIDT_ACCESS_RING3, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x2D, (PVOID)ArTrap0x2D, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING3);
-    SetIdtGate(ProcessorBlock->IdtBase, 0x2E, (PVOID)ArTrap0x2E, KGDT_R0_CODE, 0, KIDT_ACCESS_RING3, I686_TRAP_GATE);
+    SetIdtGate(ProcessorBlock->IdtBase, 0x2E, (PVOID)ArTrap0x2E, KGDT_R0_CODE, 0, KIDT_INTERRUPT | KIDT_ACCESS_RING3);
 }
 
 /**
@@ -656,9 +656,6 @@ AR::ProcSup::SetGdtEntryBase(IN PKGDTENTRY Gdt,
  * @param Access
  *        Supplies the gate access rights.
  *
- * @param Type
- *        Supplies the gate type.
- *
  * @return This routine does not return any value.
  *
  * @since XT 1.0
@@ -670,21 +667,13 @@ AR::ProcSup::SetIdtGate(IN PKIDTENTRY Idt,
                         IN PVOID Handler,
                         IN USHORT Selector,
                         IN USHORT Ist,
-                        IN USHORT Dpl,
+                        IN USHORT Access)
-                        IN USHORT Type)
 {
-    /* Set the handler's address */
+    /* Setup the gate */
     Idt[Vector].Offset = (USHORT)((ULONG)Handler & 0xFFFF);
     Idt[Vector].ExtendedOffset = (USHORT)((ULONG)Handler >> 16);
-
+    Idt[Vector].Access = 0x8000 | (Access << 8);
-    /* Set the code segment selector */
     Idt[Vector].Selector = Selector;
-
-    /* Initialize the gate's attributes and flags */
-    Idt[Vector].Access = 0;
-    Idt[Vector].Dpl = Dpl;
-    Idt[Vector].Present = 1;
-    Idt[Vector].Type = Type;
 }
 
 /**

xtoskrnl/includes/ar/amd64/procsup.hh

@@ -67,8 +67,7 @@ namespace AR
                                          IN PVOID Handler,
                                          IN USHORT Selector,
                                          IN USHORT Ist,
-                                         IN USHORT Dpl,
+                                         IN USHORT Access);
-                                         IN USHORT Type);
     };
 }
 

xtoskrnl/includes/ar/i686/procsup.hh

@@ -72,8 +72,7 @@ namespace AR
                                          IN PVOID Handler,
                                          IN USHORT Selector,
                                          IN USHORT Ist,
-                                         IN USHORT Dpl,
+                                         IN USHORT Access);
-                                         IN USHORT Type);
             STATIC XTAPI VOID SetNonMaskableInterruptTssEntry(IN PKPROCESSOR_BLOCK ProcessorBlock,
                                                               IN PVOID KernelFaultStack);
 

xtoskrnl/includes/ke/spinlock.hh

@@ -17,73 +17,12 @@ namespace KE
 {
     class SpinLock
     {
-        private:
-            STATIC KSPIN_LOCK DispatcherLockQueue;
-            STATIC KSPIN_LOCK ExpansionLockQueue;
-            STATIC KSPIN_LOCK FileSystemLockQueue;
-            STATIC KSPIN_LOCK IoCancelLockQueue;
-            STATIC KSPIN_LOCK IoCompletionLockQueue;
-            STATIC KSPIN_LOCK IoDatabaseLockQueue;
-            STATIC KSPIN_LOCK IoVpbLockQueue;
-            STATIC KSPIN_LOCK MasterLockQueue;
-            STATIC KSPIN_LOCK NonPagedAllocLockQueue;
-            STATIC KSPIN_LOCK NonPagedPoolLockQueue;
-            STATIC KSPIN_LOCK PfnLockQueue;
-            STATIC KSPIN_LOCK SystemSpaceLockQueue;
-            STATIC KSPIN_LOCK TimerTableLockQueue;
-            STATIC KSPIN_LOCK VacbLockQueue;
-            STATIC KSPIN_LOCK WorkLockQueue;
-
         public:
             STATIC XTFASTCALL VOID AcquireQueuedSpinLock(IN KSPIN_LOCK_QUEUE_LEVEL LockLevel);
             STATIC XTFASTCALL VOID AcquireSpinLock(IN OUT PKSPIN_LOCK SpinLock);
-            STATIC XTAPI VOID InitializeAllLocks();
-            STATIC XTAPI VOID InitializeLockQueues();
             STATIC XTAPI VOID InitializeSpinLock(IN PKSPIN_LOCK SpinLock);
             STATIC XTFASTCALL VOID ReleaseQueuedSpinLock(IN KSPIN_LOCK_QUEUE_LEVEL LockLevel);
             STATIC XTFASTCALL VOID ReleaseSpinLock(IN OUT PKSPIN_LOCK SpinLock);
-            STATIC XTFASTCALL BOOLEAN TestSpinLock(IN PKSPIN_LOCK SpinLock);
-    };
-
-    class QueuedSpinLockGuard
-    {
-        private:
-            KSPIN_LOCK_QUEUE_LEVEL QueuedLockLevel;
-
-        public:
-            QueuedSpinLockGuard(IN OUT KSPIN_LOCK_QUEUE_LEVEL LockLevel)
-            {
-                QueuedLockLevel = LockLevel;
-                KE::SpinLock::AcquireQueuedSpinLock(QueuedLockLevel);
-            }
-
-            ~QueuedSpinLockGuard()
-            {
-                KE::SpinLock::ReleaseQueuedSpinLock(QueuedLockLevel);
-            }
-
-            QueuedSpinLockGuard(const QueuedSpinLockGuard&) = delete;
-            QueuedSpinLockGuard& operator=(const QueuedSpinLockGuard&) = delete;
-    };
-
-    class SpinLockGuard
-    {
-        private:
-            PKSPIN_LOCK SpinLock;
-
-        public:
-            SpinLockGuard(IN OUT PKSPIN_LOCK SpinLock)
-            {
-                KE::SpinLock::AcquireSpinLock(SpinLock);
-            }
-
-            ~SpinLockGuard()
-            {
-                KE::SpinLock::ReleaseSpinLock(SpinLock);
-            }
-
-            SpinLockGuard(const SpinLockGuard&) = delete;
-            SpinLockGuard& operator=(const SpinLockGuard&) = delete;
     };
 }
 

xtoskrnl/ke/data.cc

@@ -12,6 +12,12 @@
 /* Kernel initialization block passed by boot loader */
 PKERNEL_INITIALIZATION_BLOCK KE::BootInformation::InitializationBlock = {};
 
+/* Kernel boot resources list */
+LIST_ENTRY KE::SystemResources::ResourcesListHead;
+
+/* Kernel boot resources lock */
+KSPIN_LOCK KE::SystemResources::ResourcesLock;
+
 /* Kernel initial process */
 EPROCESS KE::KProcess::InitialProcess;
 
@@ -20,54 +26,3 @@ ETHREAD KE::KThread::InitialThread = {};
 
 /* Kernel UBSAN active frame flag */
 BOOLEAN KE::KUbsan::ActiveFrame = FALSE;
-
-/* Kernel dispatcher lock queue */
-KSPIN_LOCK KE::SpinLock::DispatcherLockQueue;
-
-/* Kernel expansion lock queue */
-KSPIN_LOCK KE::SpinLock::ExpansionLockQueue;
-
-/* Kernel file system structures lock queue */
-KSPIN_LOCK KE::SpinLock::FileSystemLockQueue;
-
-/* Kernel IO cancel lock queue */
-KSPIN_LOCK KE::SpinLock::IoCancelLockQueue;
-
-/* Kernel IO completion lock queue */
-KSPIN_LOCK KE::SpinLock::IoCompletionLockQueue;
-
-/* Kernel IO database lock queue */
-KSPIN_LOCK KE::SpinLock::IoDatabaseLockQueue;
-
-/* Kernel IO VPB lock queue */
-KSPIN_LOCK KE::SpinLock::IoVpbLockQueue;
-
-/* Kernel cache master lock queue */
-KSPIN_LOCK KE::SpinLock::MasterLockQueue;
-
-/* Kernel non-paged allocator lock queue */
-KSPIN_LOCK KE::SpinLock::NonPagedAllocLockQueue;
-
-/* Kernel non-paged pool lock queue */
-KSPIN_LOCK KE::SpinLock::NonPagedPoolLockQueue;
-
-/* Kernel PFN lock queue */
-KSPIN_LOCK KE::SpinLock::PfnLockQueue;
-
-/* Kernel system space lock queue */
-KSPIN_LOCK KE::SpinLock::SystemSpaceLockQueue;
-
-/* Kernel Timer table lock queue */
-KSPIN_LOCK KE::SpinLock::TimerTableLockQueue;
-
-/* Kernel VACB lock queue */
-KSPIN_LOCK KE::SpinLock::VacbLockQueue;
-
-/* Kernel work queue lock queue */
-KSPIN_LOCK KE::SpinLock::WorkLockQueue;
-
-/* Kernel boot resources list */
-LIST_ENTRY KE::SystemResources::ResourcesListHead;
-
-/* Kernel boot resources lock */
-KSPIN_LOCK KE::SystemResources::ResourcesLock;

xtoskrnl/ke/spinlock.cc

@@ -4,7 +4,6 @@
  * FILE:            xtoskrnl/ke/spinlock.cc
  * DESCRIPTION:     Spinlocks support
  * DEVELOPERS:      Rafal Kupiec <belliash@codingworkshop.eu.org>
- *                  Aiken Harris <harraiken91@gmail.com>
  */
 
 #include <xtos.hh>
@@ -57,78 +56,6 @@ KE::SpinLock::AcquireSpinLock(IN OUT PKSPIN_LOCK SpinLock)
     AR::CpuFunc::ReadWriteBarrier();
 }
 
-/**
- * Initializes all kernel spinlocks.
- *
- * @return This routine does not return any value.
- *
- * @since XT 1.0
- */
-XTAPI
-VOID
-KE::SpinLock::InitializeAllLocks()
-{
-    /* Initialize all spin locks */
-    InitializeSpinLock(&DispatcherLockQueue);
-    InitializeSpinLock(&PfnLockQueue);
-    InitializeSpinLock(&SystemSpaceLockQueue);
-}
-
-/**
- * Initializes spinlock queues for current processor.
- *
- * @return This routine does not return any value.
- *
- * @since XT 1.0
- */
-XTAPI
-VOID
-KE::SpinLock::InitializeLockQueues()
-{
-    PKPROCESSOR_CONTROL_BLOCK ControlBlock;
-
-    /* Get current processor control block */
-    ControlBlock = KE::Processor::GetCurrentProcessorControlBlock();
-
-    /* Initialize PCB lock queues */
-    ControlBlock->LockQueue[DispatcherLock].Lock = &DispatcherLockQueue;
-    ControlBlock->LockQueue[DispatcherLock].Next = NULLPTR;
-    ControlBlock->LockQueue[ExpansionLock].Lock = &ExpansionLockQueue;
-    ControlBlock->LockQueue[ExpansionLock].Next = NULLPTR;
-    ControlBlock->LockQueue[PfnLock].Lock = &PfnLockQueue;
-    ControlBlock->LockQueue[PfnLock].Next = NULLPTR;
-    ControlBlock->LockQueue[SystemSpaceLock].Lock = &SystemSpaceLockQueue;
-    ControlBlock->LockQueue[SystemSpaceLock].Next = NULLPTR;
-    ControlBlock->LockQueue[VacbLock].Lock = &VacbLockQueue;
-    ControlBlock->LockQueue[VacbLock].Next = NULLPTR;
-    ControlBlock->LockQueue[MasterLock].Lock = &MasterLockQueue;
-    ControlBlock->LockQueue[MasterLock].Next = NULLPTR;
-    ControlBlock->LockQueue[NonPagedAllocPoolLock].Lock = &NonPagedAllocLockQueue;
-    ControlBlock->LockQueue[NonPagedAllocPoolLock].Next = NULLPTR;
-    ControlBlock->LockQueue[IoCancelLock].Lock = &IoCancelLockQueue;
-    ControlBlock->LockQueue[IoCancelLock].Next = NULLPTR;
-    ControlBlock->LockQueue[WorkQueueLock].Lock = &WorkLockQueue;
-    ControlBlock->LockQueue[WorkQueueLock].Next = NULLPTR;
-    ControlBlock->LockQueue[IoVpbLock].Lock = &IoVpbLockQueue;
-    ControlBlock->LockQueue[IoVpbLock].Next = NULLPTR;
-    ControlBlock->LockQueue[IoDatabaseLock].Lock = &IoDatabaseLockQueue;
-    ControlBlock->LockQueue[IoDatabaseLock].Next = NULLPTR;
-    ControlBlock->LockQueue[IoCompletionLock].Lock = &IoCompletionLockQueue;
-    ControlBlock->LockQueue[IoCompletionLock].Next = NULLPTR;
-    ControlBlock->LockQueue[FileSystemLock].Lock = &FileSystemLockQueue;
-    ControlBlock->LockQueue[FileSystemLock].Next = NULLPTR;
-    ControlBlock->LockQueue[AfdWorkQueueLock].Lock = NULLPTR;
-    ControlBlock->LockQueue[AfdWorkQueueLock].Next = NULLPTR;
-    ControlBlock->LockQueue[BcbLock].Lock = NULLPTR;
-    ControlBlock->LockQueue[BcbLock].Next = NULLPTR;
-    ControlBlock->LockQueue[NonPagedPoolLock].Lock = &NonPagedPoolLockQueue;
-    ControlBlock->LockQueue[NonPagedPoolLock].Next = NULLPTR;
-    ControlBlock->LockQueue[ReservedSystemLock].Lock = NULLPTR;
-    ControlBlock->LockQueue[ReservedSystemLock].Next = NULLPTR;
-    ControlBlock->LockQueue[TimerTableLock].Lock = &TimerTableLockQueue;
-    ControlBlock->LockQueue[TimerTableLock].Next = NULLPTR;
-}
-
 /**
  * Initializes a kernel spinlock object.
  *
@@ -185,29 +112,3 @@ KE::SpinLock::ReleaseSpinLock(IN OUT PKSPIN_LOCK SpinLock)
     /* Add an explicit memory barrier */
     AR::CpuFunc::ReadWriteBarrier();
 }
-
-/**
- * Tests a kernel spin lock.
- *
- * @param SpinLock
- *        Supplies a pointer to the kernel spin lock.
- *
- * @return This routine returns TRUE if the lock is free, FALSE otherwise.
- *
- * @since XT 1.0
- */
-XTFASTCALL
-BOOLEAN
-TestSpinLock(IN PKSPIN_LOCK SpinLock)
-{
-    /* Check if the lock is free */
-    if(*SpinLock)
-    {
-        /* Spinlock is busy, yield processor and return FALSE */
-        AR::CpuFunc::YieldProcessor();
-        return FALSE;
-    }
-
-    /* Spinlock is free, return TRUE */
-    return TRUE;
-}

xtoskrnl/mm/i686/pagemap.cc

@@ -83,7 +83,7 @@ MM::PageMap::GetPteAddress(PVOID Address)
 
     /* Calculate offset and return PTE address */
     Offset = ((((ULONG_PTR)(Address)) >> MM_PTI_SHIFT) << PageMapInfo.PteShift);
-    return (PMMPTE)(PageMapInfo.PteBase + Offset);
+    return (PMMPTE)(MM_PTE_BASE + Offset);
 }
 
 /**