91 lines
3.6 KiB
INI
91 lines
3.6 KiB
INI
# This is the XT Boot Loader (XTLDR) configuration file. It follows an INI format and is divided into sections, which
|
|
# contain a properties. Each property has a name and value delimited by an equal (=) character. Comments must start
|
|
# with a semicolon (;) or a hash character (#) and run to the end of the line.
|
|
#
|
|
# Basic section is [XTLDR] which contains a bootloader specific options:
|
|
# Debug - enables the debugging port and consists of two comma-separated parameters: com port and baud rate;
|
|
# it is also possible to specify custom port address with: COM0:[address],[baud_rate]
|
|
# Default - specifies which operating system listen in config file will be started if no choice is made
|
|
# KeepLastBoot - specifies whether last booted OS should be stored in NVRAM and booted automatically next time, or not;
|
|
# this parameter takes 'true' or 'false' value
|
|
# Modules - supplies a list of modules that will be loaded in orded to extend XTLDR functionality
|
|
# Timeout - sets the countdown timer (in seconds) before the default OS get started automatically
|
|
# Tune - plays a tune on the pcspeaker right before the XTLDR boot menu shows up
|
|
#
|
|
# Another type of section is [OS-Section] which adds a new position (operating system) to the boot menu. Each type
|
|
# of the operating system provides a set of available parameters. If unsupported option is added, it is being ignored
|
|
# by the XT Boot Loader. The available options are:
|
|
# BootModules - supplies a list of additional modules that will be loaded just before invoking the boot protocol
|
|
# SystemName - sets a long operating system name that will be shown on the boot menu
|
|
# SystemType - specifies an OS type from a predefined list of supported boot protocols
|
|
# SystemPath - the ARC path, eg. multi(0)disk(0)rdisk(0)partition(1)
|
|
# KernelFile - sets kernel filename with optional path relative to SystemPath
|
|
# InitrdFile - sets initramfs image filename with optional path relative to SystemPath
|
|
# HalFile - sets HAL filename with optional path relative to SystemPath
|
|
# Parameters - specifies extra boot options for the kernel
|
|
|
|
[XTLDR]
|
|
Debug=COM1,115200
|
|
Default=ExectOS
|
|
KeepLastBoot=TRUE
|
|
Modules=beep
|
|
Timeout=10
|
|
Tune=400 880 2 988 2 783 2 392 2 587 3
|
|
|
|
[ExectOS]
|
|
SystemName="ExectOS Operating System"
|
|
SystemType=XTOS
|
|
BootModules=xtos_o
|
|
SystemPath=multi(0)disk(0)rdisk(0)partition(1)/ExectOS
|
|
KernelFile=xtoskrnl.exe
|
|
Parameters=DEBUG=COM1,115200
|
|
|
|
[ExectOS_FBDEBUG]
|
|
SystemName="ExectOS Operating System (FBDEBUG)"
|
|
SystemType=XTOS
|
|
BootModules=xtos_o
|
|
SystemPath=multi(0)disk(0)rdisk(0)partition(1)/ExectOS
|
|
KernelFile=xtoskrnl.exe
|
|
Parameters=DEBUG=COM1,115200;SCREEN
|
|
|
|
[ExectOS_NOXPA]
|
|
SystemName="ExectOS Operating System (NOXPA)"
|
|
SystemType=XTOS
|
|
BootModules=xtos_o
|
|
SystemPath=multi(0)disk(0)rdisk(0)partition(1)/ExectOS
|
|
KernelFile=xtoskrnl.exe
|
|
Parameters=DEBUG=COM1,115200 NOXPA
|
|
|
|
[ExectOS_NOXPA_FBDEBUG]
|
|
SystemName="ExectOS Operating System (NOXPA / FBDEBUG)"
|
|
SystemType=XTOS
|
|
BootModules=xtos_o
|
|
SystemPath=multi(0)disk(0)rdisk(0)partition(1)/ExectOS
|
|
KernelFile=xtoskrnl.exe
|
|
Parameters=DEBUG=COM1,115200;SCREEN NOXPA
|
|
|
|
[Windows]
|
|
SystemName="Microsoft Windows 2000"
|
|
SystemType=NT50
|
|
BootModules=ntos
|
|
SystemPath=multi(0)disk(0)rdisk(0)partition(2)/Windows
|
|
KernelFile=ntoskrnl.exe
|
|
HalFile=hal.dll
|
|
Parameters=/NOGUIBOOT /MININT
|
|
|
|
[Linux]
|
|
SystemName="GNU/Linux"
|
|
SystemType=LINUX
|
|
BootModules=linux
|
|
SystemPath=multi(0)disk(0)rdisk(0)partition(3)/boot
|
|
KernelFile=vmlinuz
|
|
InitrdFile=initramfs.cpio.gz
|
|
Parameters=root=/dev/xvda3 rootfstype=ext4
|
|
|
|
[EFI Shell]
|
|
SystemName="EFI Shell"
|
|
SystemType=CHAINLOADER
|
|
BootModules=chainldr
|
|
SystemPath=multi(0)disk(0)rdisk(0)partition(1)/efi/boot
|
|
KernelFile=efishell.efi
|