Move font data to a source file

CMakeLists.txt

@@ -60,10 +60,11 @@ file(RELATIVE_PATH _PATH_PREFIX ${EXECTOS_BINARY_DIR} ${EXECTOS_SOURCE_DIR})
 add_compiler_flags(-D__RELFILE__="&__FILE__[__FILE__[0] == '.' ? sizeof \\\"${_PATH_PREFIX}\\\" - 1 : sizeof XTOS_SOURCE_DIR]")
 
 # Set the virtual disk image size (in MiB)
-set_disk_image_size(48)
+set_disk_image_size(32)
 
 # Build all subprojects
-add_subdirectory(boot)
+add_subdirectory(bootdata)
 add_subdirectory(drivers)
 add_subdirectory(sdk)
+add_subdirectory(xtldr)
 add_subdirectory(xtoskrnl)

CONTRIBUTING.md

@@ -9,7 +9,8 @@ porting drivers, fixing bugs, writing tests, creating documentation, or helping
 love the help.
 
 ## Wish List
-If you are looking for a way to contribute, but you are not sure where to start, check our list of
+If you are looking for a way to contribute, but you are not sure where to start, check our [IDEAS](IDEAS.md) and
+[KNOWN ISSUES](KNOWN_ISSUES.md) pages for suggestions. We try to keep them up to date. You can also check a list of
 [open issues](https://git.codingworkshop.eu.org/xt-sys/exectos/issues). If you find interesting task and you are serious
 about tackling one, feel free to contact us. We will be able to provide a more detailed information and suggestions
 towards getting started.

IDEAS.md

@@ -0,0 +1,9 @@
+## ExectOS Ideas
+This is a list of ideas that migh but not must be realized.
+
+### XTOSKRNL
+ - [ ] Implement mechanism for detecting CPU features and checking hardware requirements. If CPU does not meet
+       requirements, it should cause a kernel panic before any non-supported instruction is being used.
+ - [ ] Finish framebuffer and terminal implementation. Initialization code is already prepared as well as routines for
+       clearing the screen and drawing single points. Terminal should be instantiable (should be able to create many
+       terminals and switch between them) and work on top of FB. It should define ANSI colors and scrollback buffer.

KNOWN_ISSUES.md

@@ -0,0 +1,6 @@
+## ExectOS Known Issues
+This is a list of well known bugs that exists in all master branch builds.
+
+### XTLDR
+ - [ ] EFI Runtime Services are not mapped properly into higher half. They are mapped itself, but all pointers inside
+       that structure point to some physical address that is unavailable after paging is enabled.

README.md

@@ -58,17 +58,15 @@ design, it requires a modern EFI enabled hardware. It is not possible currently
 
 # Source structure
 | Directory   | Description                                              |
-|------------------|--------------------------------------------------------------|
-| boot/bootdata    | default configuration and data needed to boot XTOS           |
-| boot/bootsect    | boot sector code (MBR & VBR) initializing the boot process   |
-| boot/xtldr       | XTOS boot loader source code                                 |
+|-------------|----------------------------------------------------------|
+| bootdata    | default configuration and data needed to boot XTOS       |
 | drivers     | XT native drivers source code                            |
-| sdk/cmake        | host toolchain configuration and build-related functions     |
-| sdk/firmware     | firmware enabling XTOS to boot on virtual machines           |
+| sdk/cmake   | Host toolchain configuration and build-related functions |
 | sdk/xtdk    | XT Software Development Kit headers                      |
 | services    | integral subsystems services source code                 |
 | subsystems  | environment subsystems source code                       |
 | xtoskrnl    | XTOS kernel source code                                  |
+| xtldr       | XTOS boot loader source code                             |
 
 # Build
 XTOS can only be built using [XTchain](https://git.codingworkshop.eu.org/xt-sys/xtchain), a dedicated toolchain designed

boot/CMakeLists.txt

@@ -1,3 +0,0 @@
-add_subdirectory(bootdata)
-add_subdirectory(bootsect)
-add_subdirectory(xtldr)

boot/bootsect/CMakeLists.txt

@@ -1,6 +0,0 @@
-# XT Boot Sector
-PROJECT(BOOTSECT)
-
-# Compile boot sectors
-compile_bootsector(mbrboot ${BOOTSECT_SOURCE_DIR}/mbrboot.S 0x7C00 Start)
-compile_bootsector(espboot ${BOOTSECT_SOURCE_DIR}/espboot.S 0x7C00 Start)

boot/bootsect/espboot.S

@@ -1,276 +0,0 @@
-/**
- * PROJECT:         ExectOS
- * COPYRIGHT:       See COPYING.md in the top level directory
- * FILE:            boot/bootsect/espboot.S
- * DESCRIPTION:     XT Boot Loader ESP boot code (FAT32)
- * DEVELOPERS:      Aiken Harris <harraiken91@gmail.com>
- */
-
-.text
-.code16
-
-
-.global Start
-Start:
-    /* Jump to the real start to omit the BPB (BIOS Parameter Block) */
-    jmp RealStart
-    nop
-
-/* BIOS Parameter Block */
-OsName:
-    .ascii "XTOS "
-OsVersion:
-    .ascii "1.0"
-BytesPerSector:
-    .word 512
-SectorsPerCluster:
-    .byte 2
-ReservedSectors:
-    .word 8
-FatCopies:
-    .byte 1
-RootDirEntries:
-    .word 1024
-TotalSectors:
-    .word 0
-MediaType:
-    .byte 0xF8
-SectorsPerFat:
-    .word 0
-SectorsPerTrack:
-    .word 17
-NumberOfHeads:
-    .word 0
-HiddenSectors:
-    .long 0
-TotalBigSectors:
-    .long 0x200000
-BigSectorsPerFat:
-    .long 0x1FE0
-ExtendedFlags:
-    .word 0
-FsVersion:
-    .word 0
-RootDirStartCluster:
-    .long 0
-FSInfoSector:
-    .word 0
-BackupBootSector:
-    .word 6
-Reserved:
-    .fill 12, 1, 0
-DriveNumber:
-    .byte 0x80
-CurrentHead:
-    .byte 0
-Signature:
-    .byte 0x29
-SerialNumber:
-    .long 0
-VolumeLabel:
-    .ascii "NO NAME    "
-FileSystem:
-    .ascii "FAT32   "
-
-RealStart:
-    /* Set segments and stack */
-    cli
-    cld
-    xorw %ax, %ax
-    movw %ax, %ds
-    movw %ax, %es
-    movw %ax, %ss
-    movw $0x7C00, %bp
-    leaw -16(%bp), %sp
-    sti
-
-    /* Get drive number */
-    cmpb $0xFF, DriveNumber - Start(%bp)
-    jne GetDriveParameters
-    movb %dl, DriveNumber - Start(%bp)
-
-GetDriveParameters:
-    /* Get drive parameters from the BIOS */
-    movb DriveNumber - Start(%bp), %dl
-    movb $0x08, %ah
-    movb $0x00, %al
-    int $0x13
-    jnc GetDriveSize
-    movw $0xFFFF, %cx
-    movb %cl, %dh
-
-GetDriveSize:
-    /* Get drive size from the BIOS */
-    movzbl %dh, %eax
-    incw %ax
-    movzbl %cl, %edx
-    andb $0x3F, %dl
-    mulw %dx
-    xchgb %cl, %ch
-    shrb $0x06, %ch
-    incw %cx
-    movzwl %cx, %ecx
-    mull %ecx
-    movl %eax, %edi
-
-VerifyBiosParameterBlock:
-    /* Verify the FAT32 BPB */
-    cmpw $0x00, SectorsPerFat - Start(%bp)
-    jne FsError
-    cmpw $0x00, FsVersion - Start(%bp)
-    ja FsError
-
-ReadExtraCode:
-    /* Read second VBR sector with extra boot code */
-    movl HiddenSectors - Start(%bp), %eax
-    addl $0x02, %eax
-    movw $0x01, %cx
-    xorw %bx, %bx
-    movw %bx, %es
-    movw $0x7E00, %bx
-    call ReadSectors
-    jmp StartSectors
-
-ReadSectors:
-    /* Check for extended BIOS functions and use it only if available */
-    pushw %es
-    pushal
-    movb $0x41, %ah
-    movw $0x55AA, %bx
-    movb DriveNumber - Start(%bp), %dl
-    int $0x13
-    jc ReadCHS
-    cmpw $0xAA55, %bx
-    jne ReadCHS
-    testb $0x01, %cl
-    jz ReadCHS
-
-    /* Verify drive size and determine whether to use CHS or LBA */
-    cmpl %edi, %eax
-    jnb ReadLBA
-
-ReadCHS:
-    /* Read sectors using CHS */
-    pushw %cx
-    pushal
-    xorl %edx, %edx
-    movzwl SectorsPerTrack - Start(%bp), %ecx
-    divl %ecx
-    incb %dl
-    movb %dl, %cl
-    movl %eax, %edx
-    shrl $0x10, %edx
-    divw NumberOfHeads - Start(%bp)
-    movb %dl, %dh
-    movb DriveNumber - Start(%bp), %dl
-    movb %al, %ch
-    rorb $0x01, %ah
-    rorb $0x01, %ah
-    orb %ah, %cl
-    movw $0x0201, %ax
-    int $0x13
-    popal
-    popw %cx
-    jc DiskError
-    incl %eax
-    movw %es, %dx
-    addw $0x20, %dx
-    movw %dx, %es
-    loop ReadCHS
-    popw %es
-    ret
-
-ReadLBA:
-    /* Prepare DAP packet and read sectors using LBA */
-    popal
-    pushw %cx
-    pushal
-    pushw $0x00
-    pushw $0x00
-    pushl %eax
-    pushw %es
-    pushw %bx
-    pushw %cx
-    pushw $0x10
-    movw %sp, %si
-    movb DriveNumber - Start(%bp), %dl
-    movb $0x42, %ah
-    int $0x13
-    jc DiskError
-    addw $0x10, %sp
-    popal
-    popw %si
-    pushw %bx
-    movzwl %si, %ebx
-    addl %ebx, %eax
-    shll $0x05, %ebx
-    movw %es, %dx
-    addw %bx, %dx
-    movw %dx, %es
-    popw %bx
-    subw %si, %cx
-    jnz ReadLBA
-    popw %es
-    ret
-
-DiskError:
-    /* Display disk error message and reboot */
-    movw $msgDiskError, %si
-    call Print
-    jmp Reboot
-
-FsError:
-    /* Display FS error message and reboot */
-    movw $msgFsError, %si
-    call Print
-    jmp Reboot
-
-Print:
-    /* Simple routine to print messages */
-    lodsb
-    orb     %al, %al
-    jz      DonePrint
-    movb    $0x0E, %ah
-    movw    $0x07, %bx
-    int     $0x10
-    jmp     Print
-DonePrint:
-    retw
-
-Reboot:
-    /* Display a message, wait for a key press and reboot */
-    movw $msgAnyKey, %si
-    call Print
-    xorw %ax, %ax
-    int $0x16
-    int $0x19
-
-msgAnyKey:
-    .ascii "Press any key to restart\r\n"
-
-msgDiskError:
-    .ascii "Disk error\r\n"
-
-msgFsError:
-    .ascii "File system error\r\n"
-
-/* Fill the rest of the VBR with zeros and add VBR signature at the end */
-.fill (510 - (. - Start)), 1, 0
-.word 0xAA55
-
-
-StartSectors:
-    /* Print message */
-    movw $msgUnavailable, %si
-    call Print
-
-    /* Wait for key press and reboot */
-    xorw %ax, %ax
-    int $0x16
-    int $0x19
-
-msgUnavailable:
-    .ascii "XTLDR requires EFI-based system!\r\nPress any key to restart\r\n"
-
-/* Fill the rest of the extra VBR with zeros */
-.fill (1024 - (. - Start)), 1, 0

boot/bootsect/mbrboot.S

@@ -1,153 +0,0 @@
-/**
- * PROJECT:         ExectOS
- * COPYRIGHT:       See COPYING.md in the top level directory
- * FILE:            boot/bootsect/amd64/mbrboot.S
- * DESCRIPTION:     XT Boot Loader MBR boot code
- * DEVELOPERS:      Rafal Kupiec <belliash@codingworkshop.eu.org>
- */
-
-.text
-.code16
-
-
-.global Start
-Start:
-    /* Set segments and stack */
-    cli
-    cld
-    xorw %ax, %ax
-    movw %ax, %ds
-    movw %ax, %es
-    movw %ax, %ss
-    movw $0x7C00, %bp
-    leaw -16(%bp), %sp
-    sti
-
-    /* Relocate MBR to 1FE0:7C00 */
-    movw $0x1FE0, %ax
-    movw %ax, %es
-    movw %bp, %si
-    movw %bp, %di
-    movw $256, %cx
-    rep movsw
-
-    /* Jump to the relocated MBR code */
-    jmp $0x1FE0, $RealStart
-
-RealStart:
-    /* Set segments */
-    movw %ax, %ds
-    movw %ax, %es
-    movw %ax, %ss
-
-    /* Print welcome message */
-    leaw msgXtosBoot, %si
-    call Print
-
-    /* Get BIOS boot drive and partition table offset */
-    lea 0x1BE(%bp), %si
-    movb %dl, .BootDrive
-    xorw %cx, %cx
-
-FindActivePartition:
-    /* Look for active partition */
-    movb (%si), %al
-    cmpb $0x80, %al
-    je PartitionFound
-    addw $16, %si
-    incw %cx
-    cmpw $4, %cx
-    jne FindActivePartition
-    jmp PartitionNotFound
-
-PartitionFound:
-    /* Save LBA start */
-    movl 8(%si), %eax
-    movl %eax, .LbaStart
-
-    /* Prepare Disk Address Packet (DAP) */
-    lea .Dap, %si
-    movb $0x10, 0(%si)
-    movb $0x00, 1(%si)
-    movw $1, 2(%si)
-    movw $0x7C00, 4(%si)
-    movw $0x0000, 6(%si)
-    movl .LbaStart, %eax
-    movl %eax, 8(%si)
-
-    /* Read Volume Boot Record (VBR) */
-    movb $0x42, %ah
-    movb .BootDrive, %dl
-    int $0x13
-    jc VbrReadFail
-
-    /* Verify VBR signature */
-    cmpw $0xAA55, (0x7C00 + 0x01FE)
-    jne InvalidSignature
-
-    /* Jump to the VBR code */
-    jmp $0x0000, $0x7C00
-
-InvalidSignature:
-    /* Invalid signature error */
-    leaw msgInvalidSignature, %si
-    call Print
-    jmp HaltSystem
-
-PartitionNotFound:
-    /* Active partition not found error */
-    leaw msgPartitionNotFound, %si
-    call Print
-    jmp HaltSystem
-
-VbrReadFail:
-    /* VBR read failed error */
-    leaw msgVbrReadFail, %si
-    call Print
-    jmp HaltSystem
-
-HaltSystem:
-    /* Disable interrupts and stop the CPU */
-    cli
-    hlt
-    jmp HaltSystem
-
-Print:
-    /* Simple routine to print messages */
-    lodsb
-    orb     %al, %al
-    jz      DonePrint
-    movb    $0x0E, %ah
-    movw    $0x07, %bx
-    int     $0x10
-    jmp     Print
-DonePrint:
-    retw
-
-.BootDrive:
-    /* Storage for the boot drive number */
-    .byte 0
-
-.Dap:
-    /* Storage for the Disk Address Packet (DAP) */
-    .fill 16, 1, 0
-
-.LbaStart:
-    /* Storage for the LBA start */
-    .long 0
-
-msgInvalidSignature:
-    .asciz "Invalid partition signature!"
-
-msgPartitionNotFound:
-    .asciz "Bootable partition not found!"
-
-msgVbrReadFail:
-    .asciz "VBR read failed!"
-
-msgXtosBoot:
-    .asciz "Starting XTOS boot loader...\r\n"
-
-/* Fill the rest of the MBR with zeros and add MBR signature at the end */
-.fill (510 - (. - Start)), 1, 0
-.word 0xAA55

configure.ps1

@@ -4,41 +4,48 @@
 # DESCRIPTION: Project configuration script for preparing the build environment
 # DEVELOPERS:  Aiken Harris <harraiken91@gmail.com>
 
+
 # Check XTchain
 if (-not $env:XTCVER) {
-    Write-Error "XTChain not detected or corrupted!"
+    Write-Host "XTChain not detected or corrupted!"
     exit 1
 }
 
-# Set target architecture defaulting to amd64
-$ARCH = if ($env:TARGET) { $env:TARGET } else { "amd64" }
-
-# Set target build type defaulting to Debug
-$env:BUILD_TYPE = if ($env:BUILD_TYPE -in @("Debug", "Release")) { $env:BUILD_TYPE } else { "Debug" }
-
-# Set variables
-$EXECTOS_SOURCE_DIR = $PSScriptRoot
-$EXECTOS_BINARY_DIR = Join-Path $EXECTOS_SOURCE_DIR "build-$ARCH-$($env:BUILD_TYPE.ToLower())"
-
-# Create build directory
-if (-not (Test-Path $EXECTOS_BINARY_DIR)) {
-    Write-Host "Creating build directory: $EXECTOS_BINARY_DIR"
-    New-Item -ItemType Directory -Path $EXECTOS_BINARY_DIR -Force | Out-Null
+# Set target architecture
+if ($env:TARGET) {
+    $ARCH = $env:TARGET
+} else {
+    $ARCH = "amd64"
 }
 
-Set-Location $EXECTOS_BINARY_DIR
+# Set target build type
+if (-not $env:BUILD_TYPE) {
+    $env:BUILD_TYPE = "DEBUG"
+}
+
+# Set variables
+$EXECTOS_SOURCE_DIR = (Get-Location).Path
+$EXECTOS_BINARY_DIR = "build-$($ARCH)-$($env:BUILD_TYPE.ToLower())"
+
+# Create directories if needed
+if ($EXECTOS_SOURCE_DIR -eq (Get-Location).Path) {
+    Write-Host "Creating directories in $EXECTOS_BINARY_DIR"
+    New-Item -ItemType Directory -Path $EXECTOS_BINARY_DIR -Force | Out-Null
+    Set-Location -Path $EXECTOS_BINARY_DIR
+}
 
 # Delete old cache
-Remove-Item "CMakeCache.txt", "host-tools/CMakeCache.txt" -ErrorAction SilentlyContinue
+Remove-Item -Path "CMakeCache.txt" -ErrorAction SilentlyContinue
+Remove-Item -Path "host-tools/CMakeCache.txt" -ErrorAction SilentlyContinue
 
 # Configure project using CMake
-& cmake -G Ninja "-DARCH:STRING=$ARCH" "-DBUILD_TYPE:STRING=$($env:BUILD_TYPE)" $EXECTOS_SOURCE_DIR
+& cmake -G Ninja -DARCH:STRING=$($ARCH) -DBUILD_TYPE:STRING=$($env:BUILD_TYPE) $EXECTOS_SOURCE_DIR
 
 # Check if configuration succeeded
 if ($LASTEXITCODE -ne 0) {
-    Write-Error "Configure script failed."
+    Write-Host "Configure script failed."
     exit 1
+} else {
+    "$($ARCH)" | Out-File -Encoding ASCII -NoNewline build.arch
+    Write-Host "Configure script completed. Enter '$EXECTOS_BINARY_DIR' directory and execute 'xbuild' to build ExectOS."
 }
-
-$ARCH | Out-File -Encoding ASCII -NoNewline "build.arch"
-Write-Host "Configure completed. Run 'xbuild' to build ExectOS."

sdk/cmake/emulation.cmake

@@ -8,79 +8,41 @@ endif()
 # This target creates a disk image
 add_custom_target(diskimg
                   DEPENDS install
-                  COMMAND diskimg -c ${EXECTOS_BINARY_DIR}/output/binaries -f 32 -o ${EXECTOS_BINARY_DIR}/output/disk.img -s ${PROJECT_DISK_IMAGE_SIZE}
-                  -m ${EXECTOS_BINARY_DIR}/boot/bootsect/mbrboot.bin -v ${EXECTOS_BINARY_DIR}/boot/bootsect/espboot.bin
+                  COMMAND sh -c "dd if=/dev/zero of=${EXECTOS_BINARY_DIR}/output/disk.img bs=512 count=${PROJECT_DISK_IMAGE_BLOCKS} 2>/dev/null 1>/dev/null"
+                  COMMAND parted ${EXECTOS_BINARY_DIR}/output/disk.img -s -a minimal mklabel gpt
+                  COMMAND parted ${EXECTOS_BINARY_DIR}/output/disk.img -s -a minimal mkpart EFI FAT32 2048s ${PROJECT_PART_IMAGE_BLOCKS}s
+                  COMMAND parted ${EXECTOS_BINARY_DIR}/output/disk.img -s -a minimal toggle 1 boot
+                  COMMAND sh -c "dd if=/dev/zero of=${EXECTOS_BINARY_DIR}/output/part.img bs=512 count=${PROJECT_PART_IMAGE_BLOCKS} 2>/dev/null 1>/dev/null"
+                  COMMAND mformat -i ${EXECTOS_BINARY_DIR}/output/part.img -h32 -t32 -n64 -L32
+                  COMMAND sh -c "mcopy -s -i ${EXECTOS_BINARY_DIR}/output/part.img ${EXECTOS_BINARY_DIR}/output/binaries/* ::"
+                  COMMAND sh -c "dd if=${EXECTOS_BINARY_DIR}/output/part.img of=${EXECTOS_BINARY_DIR}/output/disk.img bs=512 count=${PROJECT_PART_IMAGE_BLOCKS} seek=2048 conv=notrunc 2>/dev/null 1>/dev/null"
+                  COMMAND rm ${EXECTOS_BINARY_DIR}/output/part.img
                   VERBATIM)
 
-find_program(BOCHS_EMULATOR bochs)
-if(BOCHS_EMULATOR)
-    # This target starts up a BOCHS+BIOS virtual machine
+# This target starts up a BOCHS+OVMF virtual machine
 add_custom_target(bochsvm
                   DEPENDS diskimg
                   COMMAND bochs -f ../sdk/firmware/bochsrc_${ARCH}.cfg -q -unlock
                   VERBATIM USES_TERMINAL)
-endif()
 
-find_program(QEMU_EMULATOR ${QEMU_COMMAND})
-if(QEMU_EMULATOR)
-    if(CMAKE_HOST_LINUX)
 # This target starts up a QEMU+OVMF virtual machine using KVM accelerator
-        add_custom_target(testefikvm
+add_custom_target(testkvm
                   DEPENDS install
-                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-KVM" -machine type=q35,kernel_irqchip=on,accel=kvm,mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
+                  COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-KVM" -machine type=q35,kernel_irqchip=on,accel=kvm,mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
                                           -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                                  -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
+                                          -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_code_${ARCH}.fd,if=pflash,format=raw,unit=0,readonly=on
+                                          -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_vars_${ARCH}.fd,if=pflash,format=raw,unit=1
                                           -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
                                           -boot menu=on -d int -M smm=off -no-reboot -no-shutdown -serial stdio
                   VERBATIM USES_TERMINAL)
-    elseif(CMAKE_HOST_WIN32)
-        # This target starts up a QEMU+OVMF virtual machine using WHPX accelerator
-        add_custom_target(testefiwhpx
-                          DEPENDS install
-                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-WHPX" -machine type=q35,kernel_irqchip=off,accel=whpx,mem-merge=off,vmport=off
-                                                  -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                                  -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
-                                                  -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
-                                                  -boot menu=on -d int -M smm=off -no-reboot -no-shutdown -serial stdio
-                          VERBATIM USES_TERMINAL)
-    endif()
 
 # This target starts up a QEMU+OVMF virtual machine using TCG accelerator
-    add_custom_target(testefitcg
-                      DEPENDS install
-                      COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-EFI-TCG" -machine type=q35,accel=tcg -cpu max,-hypervisor
-                                              -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                              -bios ${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_${ARCH}.fd
-                                              -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
-                                              -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
-                      VERBATIM USES_TERMINAL)
-
-    if(CMAKE_HOST_LINUX)
-        # This target starts up a QEMU+SEABIOS virtual machine using KVM accelerator
-        add_custom_target(testkvm
-                          DEPENDS diskimg
-                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-KVM" -machine type=q35,kernel_irqchip=on,accel=kvm,mem-merge=off,vmport=off -enable-kvm -cpu host,-hypervisor,+topoext
-                                                  -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                                  -hda ${EXECTOS_BINARY_DIR}/output/disk.img
-                                                  -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
-                          VERBATIM USES_TERMINAL)
-    elseif(CMAKE_HOST_WIN32)
-        # This target starts up a QEMU+SEABIOS virtual machine using WHPX accelerator
-        add_custom_target(testwhpx
-                          DEPENDS diskimg
-                          COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-WHPX" -machine type=q35,kernel_irqchip=off,accel=whpx,mem-merge=off,vmport=off
-                                                  -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                                  -hda ${EXECTOS_BINARY_DIR}/output/disk.img
-                                                  -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
-                          VERBATIM USES_TERMINAL)
-    endif()
-
-    # This target starts up a QEMU+SEABIOS virtual machine using TCG accelerator
 add_custom_target(testtcg
-                      DEPENDS diskimg
-                      COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-BIOS-TCG" -machine type=q35,accel=tcg -cpu max,-hypervisor
+                  DEPENDS install
+                  COMMAND ${QEMU_COMMAND} -name "ExectOS-${ARCH}-TCG" -machine type=q35,accel=tcg -cpu max,-hypervisor
                                           -smp 2,sockets=1,cores=1,threads=2 -m 4G -overcommit mem-lock=off -rtc clock=host,base=localtime,driftfix=none
-                                              -hda ${EXECTOS_BINARY_DIR}/output/disk.img
-                                              -boot menu=on -d int -no-reboot -no-shutdown -serial stdio
+                                          -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_code_${ARCH}.fd,if=pflash,format=raw,unit=0,readonly=on
+                                          -drive file=${EXECTOS_SOURCE_DIR}/sdk/firmware/ovmf_vars_${ARCH}.fd,if=pflash,format=raw,unit=1
+                                          -hda fat:rw:${EXECTOS_BINARY_DIR}/output/binaries
+                                          -boot menu=on -d int -M smm=off -no-reboot -no-shutdown -serial stdio
                   VERBATIM USES_TERMINAL)
-endif()

sdk/cmake/functions.cmake

@@ -69,7 +69,6 @@ function(compile_bootsector NAME SOURCE BASEADDR ENTRYPOINT)
         COMMAND ${CMAKE_ASM_COMPILER}
             /nologo
             --target=i386-none-elf
-            -I${CMAKE_CURRENT_SOURCE_DIR}
             /Fo${CMAKE_CURRENT_BINARY_DIR}/${OBJECT_NAME}
             -c -- ${SOURCE}
         COMMAND ${CMAKE_ASM_LINKER}
@@ -88,13 +87,18 @@ function(compile_bootsector NAME SOURCE BASEADDR ENTRYPOINT)
     )
 endfunction()
 
-# This function sets the the qemu disk image size (in MiB)
-function(set_disk_image_size SIZE)
-	MATH(EXPR DISK_BLOCKS ${SIZE}*1024*1024/512)
-	MATH(EXPR PART_BLOCKS ${DISK_BLOCKS}-2048)
-	set(PROJECT_DISK_IMAGE_SIZE ${SIZE} CACHE INTERNAL "PROJECT_DISK_IMAGE_SIZE")
-	set(PROJECT_DISK_IMAGE_BLOCKS ${DISK_BLOCKS} CACHE INTERNAL "PROJECT_DISK_IMAGE_BLOCKS")
-	set(PROJECT_PART_IMAGE_BLOCKS ${PART_BLOCKS} CACHE INTERNAL "PROJECT_PART_IMAGE_BLOCKS")
+# This function sets a property for specified module
+function(set_module_property MODULE PROPERTY FLAGS)
+    if(NOT ${ARGC} EQUAL 3)
+        message(FATAL_ERROR "Invalid number of arguments passwd to add_module_property() function")
+    endif()
+    get_target_property(VAL ${MODULE} ${PROPERTY})
+    if(VAL)
+        set(VAL "${VAL} ${FLAGS}")
+    else()
+        set(VAL "${FLAGS}")
+    endif()
+    set_property(TARGET ${MODULE} PROPERTY ${PROPERTY} ${VAL})
 endfunction()
 
 # This function installs specified directory recursively under destination directory
@@ -113,20 +117,6 @@ function(set_install_target TARGET DESTINATION)
     install(TARGETS ${TARGET} DESTINATION ${EXECTOS_BINARY_DIR}/output/binaries/${DESTINATION})
 endfunction()
 
-# This function sets a property for specified module
-function(set_module_property MODULE PROPERTY FLAGS)
-    if(NOT ${ARGC} EQUAL 3)
-        message(FATAL_ERROR "Invalid number of arguments passwd to add_module_property() function")
-    endif()
-    get_target_property(VAL ${MODULE} ${PROPERTY})
-    if(VAL)
-        set(VAL "${VAL} ${FLAGS}")
-    else()
-        set(VAL "${FLAGS}")
-    endif()
-    set_property(TARGET ${MODULE} PROPERTY ${PROPERTY} ${VAL})
-endfunction()
-
 function(set_sdk_target FILENAME DESTINATION)
     install(DIRECTORY ${FILENAME} DESTINATION ${EXECTOS_BINARY_DIR}/output/sdk/${DESTINATION})
 endfunction()
@@ -140,3 +130,11 @@ function(set_specfile SPECFILE EXPORTNAME)
     add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${FILENAME}.def ${CMAKE_CURRENT_BINARY_DIR}/${FILENAME}.c
                        COMMAND ${CMAKE_SPEC_COMPILER} -a=${ARCH} -n=${EXPORTNAME} -d=${CMAKE_CURRENT_BINARY_DIR}/${FILENAME}.def -s=${CMAKE_CURRENT_BINARY_DIR}/${FILENAME}.c ${CMAKE_CURRENT_SOURCE_DIR}/${SPECFILE})
 endfunction()
+
+# This function sets the the qemu disk image size (in MiB)
+function(set_disk_image_size SIZE)
+	MATH(EXPR DISK_BLOCKS ${SIZE}*1024*1024/512)
+	MATH(EXPR PART_BLOCKS ${DISK_BLOCKS}-2048)
+	set(PROJECT_DISK_IMAGE_BLOCKS ${DISK_BLOCKS} CACHE INTERNAL "PROJECT_DISK_IMAGE_BLOCKS")
+	set(PROJECT_PART_IMAGE_BLOCKS ${PART_BLOCKS} CACHE INTERNAL "PROJECT_PART_IMAGE_BLOCKS")
+endfunction()

sdk/firmware/bochsrc_amd64.cfg

@@ -3,9 +3,9 @@ plugin_ctrl: usb_xhci=false, serial=true, e1000=false, extfpuirq=true, parallel=
 config_interface: textconfig
 display_library: x
 memory: host=64, guest=64
-romimage: file="../sdk/firmware/rombios.bin", address=0x00000000, options=none
+romimage: file="../sdk/firmware/ovmf_pure_amd64.fd", address=0x00000000, options=none
 vgaromimage: file="../sdk/firmware/vgabios.bin"
-boot: disk
+boot: floppy
 floppy_bootsig_check: disabled=0
 floppya: type=1_44
 # no floppyb
@@ -27,7 +27,11 @@ optramimage3: file=none
 optramimage4: file=none
 pci: enabled=1, chipset=i440fx, slot1=cirrus, slot2=none, slot3=none, slot4=none, slot5=none
 vga: extension=cirrus, update_freq=5, realtime=1, ddc=builtin
-cpu: count=1:1:1, ips=400000000, quantum=16, model=corei7_sandy_bridge_2600k, reset_on_triple_fault=0, cpuid_limit_winnt=0, ignore_bad_msrs=1, mwait_is_nop=0
+cpu: count=1:1:1, ips=400000000, quantum=16, model=bx_generic, reset_on_triple_fault=0, cpuid_limit_winnt=0, ignore_bad_msrs=1, mwait_is_nop=0
+cpuid: level=6, stepping=3, model=3, family=6, vendor_string="GenuineIntel", brand_string="              Intel(R) Pentium(R) 4 CPU        "
+cpuid: mmx=true, apic=xapic, simd=sse4_2, sse4a=false, misaligned_sse=false, sep=true
+cpuid: movbe=false, adx=false, aes=false, sha=false, xsave=false, xsaveopt=false, x86_64=true
+cpuid: 1g_pages=false, pcid=false, fsgsbase=false, smep=false, smap=false, mwait=true
 print_timestamps: enabled=0
 port_e9_hack: enabled=0
 private_colormap: enabled=0

sdk/firmware/bochsrc_i686.cfg

@@ -3,9 +3,9 @@ plugin_ctrl: usb_xhci=false, serial=true, e1000=false, extfpuirq=true, parallel=
 config_interface: textconfig
 display_library: x
 memory: host=64, guest=64
-romimage: file="../sdk/firmware/rombios.bin", address=0x00000000, options=none
+romimage: file="../sdk/firmware/ovmf_pure_i686.fd", address=0x00000000, options=none
 vgaromimage: file="../sdk/firmware/vgabios.bin"
-boot: disk
+boot: floppy
 floppy_bootsig_check: disabled=0
 floppya: type=1_44
 # no floppyb
@@ -27,7 +27,11 @@ optramimage3: file=none
 optramimage4: file=none
 pci: enabled=1, chipset=i440fx, slot1=cirrus, slot2=none, slot3=none, slot4=none, slot5=none
 vga: extension=cirrus, update_freq=5, realtime=1, ddc=builtin
-cpu: count=1:1:1, ips=400000000, quantum=16, model=corei7_sandy_bridge_2600k, reset_on_triple_fault=0, cpuid_limit_winnt=0, ignore_bad_msrs=1, mwait_is_nop=0
+cpu: count=1:1:1, ips=400000000, quantum=16, model=bx_generic, reset_on_triple_fault=0, cpuid_limit_winnt=0, ignore_bad_msrs=1, mwait_is_nop=0
+cpuid: level=6, stepping=3, model=3, family=6, vendor_string="GenuineIntel", brand_string="              Intel(R) Pentium(R) 4 CPU        "
+cpuid: mmx=true, apic=xapic, simd=sse4_2, sse4a=false, misaligned_sse=false, sep=true
+cpuid: movbe=false, adx=false, aes=false, sha=false, xsave=false, xsaveopt=false, x86_64=true
+cpuid: 1g_pages=false, pcid=false, fsgsbase=false, smep=false, smap=false, mwait=true
 print_timestamps: enabled=0
 port_e9_hack: enabled=0
 private_colormap: enabled=0

xtldr/config.cc

@@ -622,7 +622,7 @@ Configuration::ParseConfigFile(IN CONST PCHAR RawConfig,
             SectionName = InputData;
 
             /* Find end of the section name */
-            while(*InputData != ']' && *InputData != '\0' && *InputData != '\r' && *InputData != '\n')
+            while(*InputData != ']' && *InputData != '\0' && *InputData != '\n')
             {
                 /* Advance to the next character */
                 InputData++;
@@ -672,7 +672,7 @@ Configuration::ParseConfigFile(IN CONST PCHAR RawConfig,
             Key = InputData;
 
             /* Find end of the key */
-            while(*InputData != '=' && *InputData != '\0' && *InputData != '\r' && *InputData != '\n')
+            while(*InputData != '=' && *InputData != '\0' && *InputData != '\n')
             {
                 /* Advance to the next character */
                 InputData++;
@@ -700,7 +700,7 @@ Configuration::ParseConfigFile(IN CONST PCHAR RawConfig,
             Value = InputData;
 
             /* Find end of the value */
-            while(*InputData != '\0' && *InputData != '\r' && *InputData != '\n')
+            while(*InputData != '\0' && *InputData != '\n')
             {
                 /* Advance to the next character */
                 InputData++;

xtldr/modules/xtos_o/xtos.cc

@@ -414,6 +414,7 @@ Xtos::InitializeLoaderBlock(IN PXTBL_PAGE_MAPPING PageMap,
 {
     PKERNEL_INITIALIZATION_BLOCK LoaderBlock;
     EFI_PHYSICAL_ADDRESS Address;
+    // PVOID RuntimeServices;
     EFI_STATUS Status;
     UINT BlockPages;
     UINT ParametersSize;
@@ -444,10 +445,20 @@ Xtos::InitializeLoaderBlock(IN PXTBL_PAGE_MAPPING PageMap,
     /* Set LoaderInformation block properties */
     LoaderBlock->LoaderInformation.DbgPrint = (PVOID)XtLdrProtocol->Debug.Print;
 
+    /* Attempt to find virtual address of the EFI Runtime Services */
+    // Status = XtLdrProtocol->GetVirtualAddress(MemoryMappings, &EfiSystemTable->RuntimeServices->Hdr, &RuntimeServices);
+    // if(Status == STATUS_EFI_SUCCESS)
+    // {
         /* Set FirmwareInformation block properties */
         LoaderBlock->FirmwareInformation.FirmwareType = SystemFirmwareEfi;
-    // LoaderBlock->FirmwareInformation.EfiFirmware.EfiVersion = EfiSystemTable->Hdr.Revision;
+        LoaderBlock->FirmwareInformation.EfiFirmware.EfiVersion = 0; //EfiSystemTable->Hdr.Revision;
         LoaderBlock->FirmwareInformation.EfiFirmware.EfiRuntimeServices = NULLPTR;
+    // }
+    // else
+    // {
+    //     /* Set invalid firmware type to indicate that kernel cannot rely on FirmwareInformation block */
+    //     LoaderBlock->FirmwareInformation.FirmwareType = SystemFirmwareInvalid;
+    // }
 
     /* Copy parameters to kernel initialization block */
     LoaderBlock->KernelParameters = (PWCHAR)((UINT_PTR)*VirtualAddress + sizeof(KERNEL_INITIALIZATION_BLOCK));
@@ -652,7 +663,7 @@ Xtos::RunBootSequence(IN PEFI_FILE_HANDLE BootDir,
     /* Add kernel image memory mapping */
     Status = XtLdrProtocol->Memory.MapVirtualMemory(&PageMap, ImageContext->VirtualAddress,
                                                     ImageContext->PhysicalAddress, ImageContext->ImagePages,
-                                                    LoaderSystemCode);
+                                                    LoaderExceptionBlock); // 0 is LoaderExceptionBlock?! Should be LoaderSystemCode?
     if(Status != STATUS_EFI_SUCCESS)
     {
         return Status;