Use PowerShell module and improved xtchain ps1

Reviewed-on: #10
Co-authored-by: Aiken Harris <harraiken@noreply.codingworkshop.git>
Co-committed-by: Aiken Harris <harraiken@noreply.codingworkshop.git>

.github/workflows/build.yml

@@ -0,0 +1,29 @@
+name: Builds
+run-name: ${{ github.actor }} runs Gitea Actions
+on: [push]
+
+jobs:
+  XTchain:
+    strategy:
+      matrix:
+        target: [linux, windows]
+        build: [full, minimal]
+    runs-on: oscw
+    container:
+      image: codingworkshop/oscw-runner:latest
+    steps:
+      - name: Clone repository
+        uses: actions/checkout@v3
+      - name: Build XTchain
+        run: |
+          if [ "${{ matrix.build }}" == "minimal" ]; then
+            ./build.sh --jobs=10 --target=${{ matrix.target }} --minimal
+          else
+            ./build.sh --jobs=10 --target=${{ matrix.target }}
+          fi
+      - name: Publish binaries
+        if: startsWith(github.ref, 'refs/tags/')
+        env:
+          OSCW_GITHUB_USERNAME: ${{ secrets.OSCW_GITHUB_USERNAME }}
+          OSCW_GITHUB_PASSWORD: ${{ secrets.OSCW_GITHUB_PASSWORD }}
+        run: github_publish $OSCW_GITHUB_USERNAME $OSCW_GITHUB_PASSWORD $(ls xtchain-*-${{ matrix.target }}.*)

.gitignore

@@ -0,0 +1,3 @@
+binaries/*
+sources/*
+xtchain-*.zst

README.md

@@ -1,22 +1,49 @@
-## XT Toolchain
-This is a GNU-based mingw-w64 toolchain. It currently supports C and C++, and provides a variety of
-tools including IDL, message and resource compilers. The XT Toolchain is also the official build
-environment for compiling XT software, including the FerretOS. Currently, it is targeted at Linux
-host only, however it should be possible to build it in MSYS2 as well.
+<p align=center>
+  <a href="https://git.codingworkshop.eu.org/xt-sys/xtchain">
+    <img alt="GIT Repository" src="https://img.shields.io/badge/Source-GIT-purple">
+  </a>
+  <a href="https://git.codingworkshop.eu.org/xt-sys/xtchain/actions">
+    <img alt="Build Status" src="https://codingworkshop.eu.org/actions.php?project=xt-sys/xtchain">
+  </a>
+  <a href="https://github.com/xt-sys/xtchain/releases">
+    <img alt="Releases" src="https://img.shields.io/github/v/release/xt-sys/xtchain?label=Release&amp;color=blueviolet">
+  </a>
+  <a href="https://git.codingworkshop.eu.org/xt-sys/xtchain/src/branch/master/COPYING.md">
+    <img alt="License" src="https://img.shields.io/badge/License-GPLv3-blue.svg">
+  </a>
+  <a href="https://github.com/sponsors/xt-sys/">
+    <img alt="Sponsors" src="https://img.shields.io/badge/Sponsor-%E2%9D%A4-red?logo=GitHub">
+  </a>
+  <a href="https://discord.com/invite/zBzJ5qMGX7">
+    <img alt="Discord" src="https://img.shields.io/badge/Chat-Join%20Discord-success">
+  </a>
+</p>
 
-This software includes:
- * Binutils
+---
+
+## XT Toolchain
+The XT Toolchain is a build environment based on LLVM/Clang/LLD. It currently supports C and C++, and includes
+a variety of auxiliary tools such as IDL, message, and resource compilers. The XT Toolchain is the official
+build system for compiling XT software, including the XT OS. It is currently available for Linux and Windows
+host systems.
+
+Key Benefits of using an LLVM-based Toolchain:
+ * Unified toolchain for multiple target architectures: i686, x86_64, armv7, and aarch64
+ * Support for generating debug information in PDB format
+ * Ability to target ARM/AArch64 architectures and produce ARM binaries
+
+This toolchain includes the following software:
  * CMake
- * GCC
- * Make
- * Mingw-w64
+ * LLVM
  * Ninja
  * Wine
 
+**Note:** This toolchain is based on the [LLVM MinGW Toolchain](https://github.com/mstorsjo/llvm-mingw).
+
 ## Licensing
-The XTchain project includes the scripts for building and assembling a toolchain as well as
-environmental shell. These are licensed under the GPLv3 license. It covers only mentioned
-components that are provided by XTchain directly. For more information on that, refer to the
-COPYING.md file. The final pre-built toolchain is covered by the licenses of the individual,
-external projects. The full list of software incorporated into this toolchain is available in the
-README.md file.
+The XTchain project includes scripts for building and assembling the toolchain, as well as the environment
+shell. These components are licensed under the GNU GPLv3 license. This license applies only to the parts
+provided directly by XTchain. For detailed information, please refer to the COPYING.md file.
+
+The final pre-built toolchain is subject to the licenses of the individual third-party projects it includes.
+A complete list of the external software used in this toolchain can be found in the README.md file.

build-linux.sh

@@ -1,535 +0,0 @@
-#!/bin/bash
-# PROJECT:     XTchain
-# LICENSE:     See the COPYING.md in the top level directory
-# FILE:        build-linux.sh
-# DESCRIPTION: Toolchain building and assembly script
-# DEVELOPERS:  Rafal Kupiec <belliash@codingworkshop.eu.org>
-
-
-# Working Directories
-BINDIR="$(pwd)/binaries"
-PCHDIR="$(pwd)/patches"
-SRCDIR="$(pwd)/sources"
-WRKDIR="$(pwd)"
-
-# Architecture Settings
-ARCHS="i686 x86_64"
-GENERIC="generic-w64-mingw32"
-
-# Compiler Flags
-CFLAGS="-march=x86-64 -mtune=generic -O2 -s -pipe"
-CXXFLAGS="${CFLAGS}"
-
-# Binutils Settings
-BINUTILSDIR="${SRCDIR}/binutils"
-BINUTILSTAG="binutils-2_35"
-BINUTILSVCS="git://sourceware.org/git/binutils-gdb.git"
-
-# CMake Settings
-CMAKEDIR="${SRCDIR}/cmake"
-CMAKETAG="v3.18.1"
-CMAKEVCS="https://gitlab.kitware.com/cmake/cmake.git"
-
-# GCC Settings
-GCCDIR="${SRCDIR}/gcc"
-GCCTAG="releases/gcc-10.2.0"
-GCCVCS="git://gcc.gnu.org/git/gcc.git"
-
-# Make Settings
-MAKEDIR="${SRCDIR}/make"
-MAKETAG="4.3"
-MAKEVCS="git://git.savannah.gnu.org/make"
-
-# Mingw-w64 Settings
-MINGWDIR="${SRCDIR}/mingw-w64"
-MINGWLIB="ucrt"
-MINGWTAG="v7.0.0"
-MINGWNTV="0x601"
-MINGWVCS="https://github.com/mirror/mingw-w64.git"
-
-# Ninja Settings
-NINJADIR="${SRCDIR}/ninja"
-NINJATAG="v1.10.0"
-NINJAVCS="https://github.com/ninja-build/ninja.git"
-
-# Wine Settings
-WINEDIR="${SRCDIR}/wine"
-WINETAG="wine-5.15"
-WINEVCS="git://source.winehq.org/git/wine.git"
-
-
-# This function applies a patches to the 3rd party project
-apply_patches()
-{
-    local PACKAGE="${1}"
-    local VERSION="${2}"
-    if [ -d "${PCHDIR}/${PACKAGE}/${VERSION}" ]; then
-        PATCHES="$(find ${PCHDIR}/${PACKAGE}/${VERSION} -name '*.diff' -o -name '*.patch' | sort -n)"
-        echo ">>> Applying custom patches ..."
-        for PATCH in ${PATCHES}; do
-            if [ -f "${PATCH}" ] && [ -r "${PATCH}" ]; then
-                for PREFIX in {0..5}; do
-                    if patch -i${PATCH} -p${PREFIX} --silent --dry-run >/dev/null; then
-                        patch -i${PATCH} -p${PREFIX} --silent
-                        echo ">>> Patch ${PATCH} applied ..."
-                        break;
-                    elif [ ${PREFIX} -ge 5 ]; then
-                        echo "Patch ${PATCH} does not fit. Failed applying patch ..."
-                        return 1
-                    fi
-                done
-            fi
-        done
-    fi
-}
-
-# This function compiles and installs BINUTILS
-binutils_build()
-{
-    for ARCH in ${ARCHS}; do
-        echo ">>> Building BINUTILS for ${ARCH} ..."
-        [ -z ${CLEAN} ] || rm -rf ${BINUTILSDIR}/build-${ARCH}
-        mkdir -p ${BINUTILSDIR}/build-${ARCH}
-        cd ${BINUTILSDIR}/build-${ARCH}
-        ../configure \
-            --target=${ARCH}-w64-mingw32 \
-            --prefix=${BINDIR} \
-            --with-sysroot=${BINDIR} \
-            --with-zlib=yes \
-            --disable-multilib \
-            --disable-nls \
-            --disable-werror \
-            --enable-gold \
-            --enable-lto \
-            --enable-plugins
-        make -j${CORES}
-        make install
-    done
-    cd ${WRKDIR}
-}
-
-# This function downloads BINUTILS from VCS
-binutils_fetch()
-{
-    if [ ! -d ${BINUTILSDIR} ]; then
-        echo ">>> Downloading BINUTILS ..."
-        git clone ${BINUTILSVCS} ${BINUTILSDIR}
-        cd ${BINUTILSDIR}
-        git checkout tags/${BINUTILSTAG}
-        apply_patches ${BINUTILSDIR##*/} ${BINUTILSTAG##*-}
-        cd ${WRKDIR}
-    fi
-}
-
-# This function compiles and installs CMAKE
-cmake_build()
-{
-    echo ">>> Building CMAKE ..."
-    [ -z ${CLEAN} ] || rm -rf ${CMAKEDIR}/build-${GENERIC}
-    mkdir -p ${CMAKEDIR}/build-${GENERIC}
-    cd ${CMAKEDIR}/build-${GENERIC}
-    ../bootstrap \
-        --prefix=${BINDIR} \
-        --parallel=${CORES} \
-        -- -DCMAKE_USE_OPENSSL=OFF
-    make -j${CORES}
-    make install
-    cd ${WRKDIR}
-}
-
-# This function downloads CMAKE from VCS
-cmake_fetch()
-{
-    if [ ! -d ${CMAKEDIR} ]; then
-        echo ">>> Downloading CMAKE ..."
-        git clone ${CMAKEVCS} ${CMAKEDIR}
-        cd ${CMAKEDIR}
-        git checkout tags/${CMAKETAG}
-        apply_patches ${CMAKEDIR##*/} ${CMAKETAG}
-        cd ${WRKDIR}
-    fi
-}
-
-# This function compiles and install GCC (phase 1)
-gcc_build_phase1()
-{
-    for ARCH in ${ARCHS}; do
-        echo ">>> Building GCC (phase1) for ${ARCH} ..."
-        [ -z ${CLEAN} ] || rm -rf ${GCCDIR}/build-${ARCH}
-        mkdir -p ${GCCDIR}/build-${ARCH}
-        cd ${GCCDIR}/build-${ARCH}
-        ../configure \
-            --target=${ARCH}-w64-mingw32 \
-            --prefix=${BINDIR} \
-            --with-sysroot=${BINDIR} \
-            --with-pkgversion="FerretOS Build Environment" \
-            --without-zstd \
-            --disable-libstdcxx-verbose \
-            --disable-multilib \
-            --disable-nls \
-            --disable-shared \
-            --disable-werror \
-            --disable-win32-registry \
-            --enable-fully-dynamic-string \
-            --enable-languages=c,c++ \
-            --enable-lto \
-            --enable-sjlj-exceptions \
-            --enable-version-specific-runtime-libs
-        make -j${CORES} all-gcc
-        make install-gcc
-        make install-lto-plugin 
-    done
-    cd ${WRKDIR}
-}
-
-# This function compiles and install GCC (phase 2)
-gcc_build_phase2()
-{
-    for ARCH in ${ARCHS}; do
-        echo ">>> Building GCC (phase2) for ${ARCH} ..."
-        cd ${GCCDIR}/build-${ARCH}
-        make -j${CORES}
-        make install
-    done
-    cd ${WRKDIR}
-}
-
-# This function downloads GCC from VCS
-gcc_fetch()
-{
-    if [ ! -d ${GCCDIR} ]; then
-        echo ">>> Downloading GCC ..."
-        git clone ${GCCVCS} ${GCCDIR}
-        cd ${GCCDIR}
-        git checkout tags/${GCCTAG}
-        apply_patches ${GCCDIR##*/} ${GCCTAG##*-}
-        ./contrib/download_prerequisites
-        cd ${WRKDIR}
-    fi
-}
-
-# This function compiles and install MAKE
-make_build()
-{
-    echo ">>> Building Make ..."
-    [ -z ${CLEAN} ] || rm -rf ${MAKEDIR}/build
-    cd ${MAKEDIR}
-    ./bootstrap
-    sed -i "s/-Werror//" maintMakefile
-    mkdir -p ${MAKEDIR}/build
-    cd ${MAKEDIR}/build
-    ../configure \
-        --prefix=${BINDIR} \
-        --disable-dependency-tracking \
-        --disable-silent-rules \
-        --program-prefix=g \
-        --without-guile
-    make -j${CORES}
-    make install
-    if [ ! -e ${BINDIR}/bin/make ]; then
-        ln -sf gmake ${BINDIR}/bin/make
-    fi
-    cd ${WRKDIR}
-}
-
-# This function downloads MAKE from VCS
-make_fetch()
-{
-    if [ ! -d ${MAKEDIR} ]; then
-        echo ">>> Downloading Make ..."
-        git clone ${MAKEVCS} ${MAKEDIR}
-        cd ${MAKEDIR}
-        git checkout tags/${MAKETAG}
-        apply_patches ${MAKEDIR##*/} ${MAKETAG}
-        cd ${WRKDIR}
-    fi
-}
-
-# This function compiles and installs MINGW CRT
-mingw_build_crt()
-{
-    for ARCH in ${ARCHS}; do
-        echo ">>> Building Mingw-w64 (CRT) for ${ARCH} ..."
-        [ -z ${CLEAN} ] || rm -rf ${MINGWDIR}/mingw-w64-crt/build-${ARCH}
-        mkdir -p ${MINGWDIR}/mingw-w64-crt/build-${ARCH}
-        cd ${MINGWDIR}/mingw-w64-crt/build-${ARCH}
-        case ${ARCH} in
-            i686)
-                FLAGS="--enable-lib32 --disable-lib64"
-                ;;
-            x86_64)
-                FLAGS="--disable-lib32 --enable-lib64"
-                ;;
-        esac
-        ORIGPATH="${PATH}"
-        PATH="${BINDIR}/bin:${PATH}"
-        ../configure \
-            --host=${ARCH}-w64-mingw32 \
-            --prefix=${BINDIR}/${ARCH}-w64-mingw32 \
-            --with-sysroot=${BINDIR} \
-            --with-default-msvcrt=${MINGWLIB} \
-            ${FLAGS}
-        make -j${CORES}
-        make install
-        PATH="${ORIGPATH}"
-    done
-    cd ${WRKDIR}
-}
-
-# This function compiles and installs MINGW headers
-mingw_build_headers()
-{
-    echo ">>> Building Mingw-w64 (headers) ..."
-    [ -z ${CLEAN} ] || rm -rf ${MINGWDIR}/mingw-w64-headers/build-${GENERIC}
-    mkdir -p ${MINGWDIR}/mingw-w64-headers/build-${GENERIC}
-    cd ${MINGWDIR}/mingw-w64-headers/build-${GENERIC}
-    ../configure \
-        --prefix=${BINDIR}/${GENERIC} \
-        --enable-idl \
-        --with-default-msvcrt=${MINGWLIB} \
-        --with-default-win32-winnt=${MINGWNTV}
-    make -j${CORES}
-    make install
-    mkdir -p ${BINDIR}/mingw
-    if [ ! -e ${BINDIR}/mingw/include ]; then
-        ln -sfn ../${GENERIC}/include ${BINDIR}/mingw/include
-    fi
-    for ARCH in ${ARCHS}; do
-        mkdir -p ${BINDIR}/${ARCH}-w64-mingw32
-        if [ ! -e ${BINDIR}/${ARCH}-w64-mingw32/include ]; then
-            ln -sfn ../${GENERIC}/include ${BINDIR}/${ARCH}-w64-mingw32/include
-        fi
-    done
-    cd ${WRKDIR}
-}
-
-# This function compiles and install MINGW libraries
-mingw_build_libs()
-{
-    for LIB in libmangle winstorecompat; do
-        echo ">>> Building Mingw-w64 (libs) for ${ARCH} ..."
-        for ARCH in ${ARCHS}; do
-            [ -z ${CLEAN} ] || rm -rf ${MINGWDIR}/mingw-w64-libraries/${LIB}/build-${ARCH}
-            mkdir -p ${MINGWDIR}/mingw-w64-libraries/${LIB}/build-${ARCH}
-            cd ${MINGWDIR}/mingw-w64-libraries/${LIB}/build-${ARCH}
-            ORIGPATH="${PATH}"
-            PATH="${BINDIR}/bin:${PATH}"
-            ../configure \
-                --host=${ARCH}-w64-mingw32 \
-                --prefix=${BINDIR}/${ARCH}-w64-mingw32 \
-                --libdir=${BINDIR}/${ARCH}-w64-mingw32/lib
-            make -j${CORES}
-            make install
-            PATH="${ORIGPATH}"
-        done
-    done
-    cd ${WRKDIR}
-}
-
-# This function compiles and installs MINGW tools
-mingw_build_tools()
-{
-    for TOOL in gendef genidl genlib genpeimg widl; do
-        for ARCH in ${ARCHS}; do
-            echo ">>> Building Mingw-w64 (tools) for ${ARCH} ..."
-            [ -z ${CLEAN} ] || rm -rf ${MINGWDIR}/mingw-w64-tools/${TOOL}/build-${ARCH}
-            mkdir -p ${MINGWDIR}/mingw-w64-tools/${TOOL}/build-${ARCH}
-            cd ${MINGWDIR}/mingw-w64-tools/${TOOL}/build-${ARCH}
-            ../configure \
-                --target=${ARCH}-w64-mingw32 \
-                --prefix=${BINDIR}
-            make -j${CORES}
-            make install
-            if [ -e ${BINDIR}/bin/${TOOL} ]; then
-                mv ${BINDIR}/bin/${TOOL} ${BINDIR}/bin/${ARCH}-w64-mingw32-${TOOL}
-            fi
-        done
-    done
-    cd ${WRKDIR}
-}
-
-# This function downloads MINGW from VCS
-mingw_fetch()
-{
-    if [ ! -d ${MINGWDIR} ]; then
-        echo ">>> Downloading Mingw-w64 ..."
-        git clone ${MINGWVCS} ${MINGWDIR}
-        cd ${MINGWDIR}
-        git checkout tags/${MINGWTAG}
-        apply_patches ${MINGWDIR##*/} ${MINGWTAG}
-        cd ${WRKDIR}
-    fi
-}
-
-# This function compiles and installs NINJA
-ninja_build()
-{
-    echo ">>> Building NINJA ..."
-    [ -z ${CLEAN} ] || rm -rf ${NINJADIR}/build-${GENERIC}
-    mkdir -p ${NINJADIR}/build-${GENERIC}
-    cd ${NINJADIR}/build-${GENERIC}
-    ../configure.py --bootstrap
-    install ninja ${BINDIR}/bin/
-    cd ${WRKDIR}
-}
-
-# This function downloads NINJA from VCS
-ninja_fetch()
-{
-    if [ ! -d ${NINJADIR} ]; then
-        echo ">>> Downloading NINJA ..."
-        git clone ${NINJAVCS} ${NINJADIR}
-        cd ${NINJADIR}
-        git checkout tags/${NINJATAG}
-        apply_patches ${NINJADIR##*/} ${NINJATAG}
-        cd ${WRKDIR}
-    fi
-}
-
-# This function compiles and install WINE tools
-wine_build()
-{
-    echo ">>> Building Wine ..."
-    mkdir -p ${WINEDIR}/build
-    cd ${WINEDIR}/build
-    ../configure \
-        -enable-win64 \
-        --without-x
-    for TOOL in winedump wmc wrc; do
-        make -j${CORES} tools/${TOOL}
-        cp tools/${TOOL}/${TOOL} ${BINDIR}/bin/
-        for ARCH in ${ARCHS}; do
-            if [ ! -e ${BINDIR}/bin/${ARCH}-w64-mingw32-${TOOL} ]; then
-                ln -sf ${TOOL} ${BINDIR}/bin/${ARCH}-w64-mingw32-${TOOL}
-            fi
-        done
-    done
-    cd ${WRKDIR}
-}
-
-# This function downloads WINE from VCS
-wine_fetch()
-{
-    if [ ! -d ${WINEDIR} ]; then
-        echo ">>> Downloading WINE ..."
-        git clone ${WINEVCS} ${WINEDIR}
-        cd ${WINEDIR}
-        git checkout tags/${WINETAG}
-        apply_patches ${WINEDIR##*/} ${WINETAG##*-}
-        cd ${WRKDIR}
-    fi
-}
-
-# This function installs XTCHAIN scripts, wrappers and symlinks
-xtchain_build()
-{
-    echo ">>> Building XTchain ..."
-    mkdir -p ${BINDIR}/bin
-    mkdir -p ${BINDIR}/lib/xtchain
-    mkdir -p ${BINDIR}/${GENERIC}/bin
-    for ARCH in ${ARCHS}; do
-        for EXEC in xtcspecc; do
-            if [ ! -e ${BINDIR}/bin/${EXEC} ]; then
-                gcc ${WRKDIR}/tools/${EXEC}.c -o ${BINDIR}/bin/${EXEC}
-            fi
-            ln -sf ${EXEC} ${BINDIR}/bin/${ARCH}-w64-mingw32-${EXEC}
-        done
-    done
-    cp ${WRKDIR}/scripts/xtclib ${BINDIR}/lib/xtchain/
-    cp ${WRKDIR}/scripts/xtchain ${BINDIR}/
-    cd ${WRKDIR}
-}
-
-
-# Exit immediately on any failure
-set -e
-
-# Check if script launched as root
-if [ "$(whoami)" = "root" ]; then
-    echo "This script cannot be run as root!"
-    exit 1
-fi
-
-# Check number of CPU cores available
-: ${CORES:=$(sysctl -n hw.ncpu 2>/dev/null)}
-: ${CORES:=$(nproc 2>/dev/null)}
-: ${CORES:=1}
-
-# Create working directories
-mkdir -p ${BINDIR}
-mkdir -p ${SRCDIR}
-
-# Export compiler flags
-export CFLAGS
-export CXXFLAGS
-
-# XTchain
-xtchain_build
-
-# Download Mingw-W64
-mingw_fetch
-
-# Build and install Mingw-W64 headers
-mingw_build_headers
-
-# Download Binutils
-binutils_fetch
-
-# Build and install Binutils
-binutils_build
-
-# Download GCC
-gcc_fetch
-
-# Build and install minimal GCC
-gcc_build_phase1
-
-# Build and install MSVCRT
-mingw_build_crt
-
-# Build and install GCC
-gcc_build_phase2
-
-# Build and install Mingw-W64 libraries
-mingw_build_libs
-
-# Build and install Mingw-W64 tools
-mingw_build_tools
-
-# Download Wine
-wine_fetch
-
-# Build and install Wine tools
-wine_build
-
-# Download Make
-make_fetch
-
-# Build and install Make
-make_build
-
-# Download CMake
-cmake_fetch
-
-# Build and install CMake
-cmake_build
-
-# Download Ninja
-ninja_fetch
-
-# Build and install Ninja
-ninja_build
-
-# Remove unneeded files to save disk space
-echo ">>> Removing unneeded files to save disk space ..."
-rm -rf ${BINDIR}/{doc,include,mingw,share/{bash-completion,emacs,gcc*,info,man,vim}}
-
-# Save XT Toolchain version
-cd ${WRKDIR}
-: ${XTCVER:=$(git describe --exact-match --tags 2>/dev/null)}
-: ${XTCVER:=DEV}
-echo "${XTCVER}" > ${BINDIR}/Version
-
-# Prepare archive
-echo ">>> Creating toolchain archive ..."
-tar -I 'zstd -19' -cpf xtchain-${XTCVER}-linux.tar.zst -C ${BINDIR} .

build.sh

@@ -0,0 +1,497 @@
+#!/bin/bash
+# PROJECT:     XTchain
+# LICENSE:     See the COPYING.md in the top level directory
+# FILE:        build.sh
+# DESCRIPTION: Toolchain crosscompilation and assembly script
+# DEVELOPERS:  Rafal Kupiec <belliash@codingworkshop.eu.org>
+#              Aiken Harris <harraiken91@gmail.com>
+
+# Working Directories
+BINDIR="$(pwd)/binaries"
+PCHDIR="$(pwd)/patches"
+SRCDIR="$(pwd)/sources"
+WRKDIR="$(pwd)"
+
+# Architecture Settings
+ARCHS="aarch64 armv7 i686 x86_64"
+
+# Default Configuration
+BUILD_JOBS=0
+BUILD_MINIMAL=0
+CLEAN_BUILD=0
+ENABLE_LLVM_ASSEMBLY=0
+LLVM_DYNAMIC_LINK=ON
+SYSTEM_NAME=Linux
+TARGET_SYSTEM=linux
+
+# CMake Settings
+CMAKEDIR="${SRCDIR}/cmake"
+CMAKETAG="v4.1.1"
+CMAKEVCS="https://gitlab.kitware.com/cmake/cmake.git"
+
+# LLVM Settings
+LLVMDIR="${SRCDIR}/llvm"
+LLVMTAG="llvmorg-21.1.1"
+LLVMVCS="https://github.com/llvm/llvm-project.git"
+
+# Ninja Settings
+NINJADIR="${SRCDIR}/ninja"
+NINJATAG="v1.13.1"
+NINJAVCS="https://github.com/ninja-build/ninja.git"
+
+# Wine Settings
+WINEDIR="${SRCDIR}/wine"
+WINETAG="wine-10.15"
+WINEVCS="https://github.com/wine-mirror/wine.git"
+
+
+
+# This function applies a patches to the 3rd party project
+apply_patches()
+{
+    local PACKAGE="${1}"
+    local VERSION="${2}"
+    if [ -d "${PCHDIR}/${PACKAGE}/${VERSION}" ]; then
+        PATCHES="$(find ${PCHDIR}/${PACKAGE}/${VERSION} -name '*.diff' -o -name '*.patch' | sort -n)"
+        echo ">>> Applying custom patches ..."
+        for PATCH in ${PATCHES}; do
+            if [ -f "${PATCH}" ] && [ -r "${PATCH}" ]; then
+                for PREFIX in {0..5}; do
+                    if patch -i${PATCH} -p${PREFIX} --silent --dry-run >/dev/null; then
+                        patch -i${PATCH} -p${PREFIX} --silent
+                        echo ">>> Patch ${PATCH} applied ..."
+                        break;
+                    elif [ ${PREFIX} -ge 5 ]; then
+                        echo "Patch ${PATCH} does not fit. Failed applying patch ..."
+                        return 1
+                    fi
+                done
+            fi
+        done
+    fi
+}
+
+# This function compiles and installs CMAKE
+cmake_build()
+{
+    local CMAKE_PARAMETERS=""
+
+    # Clean old build if necessary
+    [ "${CLEAN_BUILD}" -eq 1 ] && rm -rf ${WINEDIR}/build-${SYSTEM_NAME}
+
+    # Additional, target-specific configuration options
+    case "${SYSTEM_NAME}" in
+        Windows)
+            CMAKE_PARAMETERS="${CMAKE_PARAMETERS} -DCMAKE_C_COMPILER=${SYSTEM_HOST}-gcc -DCMAKE_CXX_COMPILER=${SYSTEM_HOST}-g++"
+            CMAKE_PARAMETERS="${CMAKE_PARAMETERS} -DCMAKE_RC_COMPILER=${SYSTEM_HOST}-windres"
+            ;;
+    esac
+
+    # Build CMake
+    echo ">>> Building CMAKE ..."
+    mkdir -p ${CMAKEDIR}/build-${SYSTEM_NAME}
+    cd ${CMAKEDIR}/build-${SYSTEM_NAME}
+    cmake \
+        -DCMAKE_BUILD_TYPE=Release \
+        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY \
+        -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \
+        -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM=NEVER \
+        -DCMAKE_INSTALL_PREFIX=${BINDIR} \
+        -DCMAKE_SYSTEM_NAME=${SYSTEM_NAME} \
+        -DCMAKE_USE_OPENSSL=OFF \
+        ${CMAKE_PARAMETERS} \
+        ..
+    cmake --build . --parallel ${BUILD_JOBS}
+    cmake --install .
+    cd ${WRKDIR}
+}
+
+# This function downloads CMAKE from VCS
+cmake_fetch()
+{
+    if [ ! -d ${CMAKEDIR} ]; then
+        echo ">>> Downloading CMAKE ..."
+        git clone --depth 1 --branch ${CMAKETAG} ${CMAKEVCS} ${CMAKEDIR}
+        cd ${CMAKEDIR}
+        apply_patches ${CMAKEDIR##*/} ${CMAKETAG}
+        cd ${WRKDIR}
+    fi
+}
+
+# This function compiles and install LLVM
+llvm_build()
+{
+    local CMAKE_PARAMETERS=""
+    local LLVM_ARCHS=()
+
+    # Clean old build if necessary
+    [ "${CLEAN_BUILD}" -eq 1 ] && rm -rf ${LLVMDIR}/llvm/build-${SYSTEM_NAME}
+
+    # Set supported architectures
+    for ARCH in ${ARCHS}; do
+        case ${ARCH} in
+            "aarch64")
+                LLVM_ARCHS+=( "AArch64" )
+                ;;
+            "armv7")
+                LLVM_ARCHS+=( "ARM" )
+                ;;
+            "i686"|"x86_64")
+                LLVM_ARCHS+=( "X86" )
+                ;;
+        esac
+    done
+    LLVM_ARCHS=( $(for ARCH in ${LLVM_ARCHS[@]}; do echo ${ARCH}; done | sort -u) )
+
+    # Disable LLVM assembly files (like BLAKE3 support) if not specified otherwise
+    if [ "${ENABLE_LLVM_ASSEMBLY}" -ne 1 ]; then
+        CMAKE_PARAMETERS="${CMAKE_PARAMETERS} -DLLVM_DISABLE_ASSEMBLY_FILES=ON"
+    fi
+
+    # Additional, target-specific configuration options
+    case "${SYSTEM_NAME}" in
+        Windows)
+            CMAKE_PARAMETERS="${CMAKE_PARAMETERS} -DCMAKE_EXE_LINKER_FLAGS=-lpthread -DCMAKE_SHARED_LINKER_FLAGS=-lpthread"
+            CMAKE_PARAMETERS="${CMAKE_PARAMETERS} -DCMAKE_C_COMPILER_TARGET=${SYSTEM_HOST} -DCMAKE_CXX_COMPILER_TARGET=${SYSTEM_HOST}"
+            CMAKE_PARAMETERS="${CMAKE_PARAMETERS} -DCMAKE_RC_COMPILER=${SYSTEM_HOST}-windres -DLLVM_HOST_TRIPLE=${SYSTEM_HOST}"
+            CMAKE_PARAMETERS="${CMAKE_PARAMETERS} -DCMAKE_FIND_ROOT=$(dirname $(readlink -f $(command -v ${SYSTEM_HOST}-windres)))/../${SYSTEM_HOST}"
+            CMAKE_PARAMETERS="${CMAKE_PARAMETERS} -DCMAKE_CXX_FLAGS=-femulated-tls"
+            ;;
+    esac
+
+    # Build LLVM
+    echo ">>> Building LLVM ..."
+    cd ${LLVMDIR}/llvm/tools
+    for UTIL in clang lld; do
+        if [ ! -e ${UTIL} ]; then
+            ln -sf ../../${UTIL} .
+        fi
+    done
+    mkdir -p ${LLVMDIR}/llvm/build-${SYSTEM_NAME}
+    cd ${LLVMDIR}/llvm/build-${SYSTEM_NAME}
+    cmake -G Ninja \
+        -DCMAKE_BUILD_TYPE="Release" \
+        -DCMAKE_C_COMPILER=clang \
+        -DCMAKE_CXX_COMPILER=clang++ \
+        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY \
+        -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \
+        -DCMAKE_FIND_ROOT_PATH_MODE_PACKAGE=ONLY \
+        -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM=NEVER \
+        -DCMAKE_INSTALL_PREFIX=${BINDIR} \
+        -DCMAKE_SYSTEM_NAME="${SYSTEM_NAME}" \
+        -DLLDB_INCLUDE_TESTS=OFF \
+        -DLLVM_ENABLE_ASSERTIONS=OFF \
+        -DLLVM_ENABLE_PROJECTS="clang;clang-tools-extra;lld;lldb" \
+        -DLLVM_INSTALL_TOOLCHAIN_ONLY=ON \
+        -DLLVM_BUILD_INSTRUMENTED=OFF \
+        -DLLVM_LINK_LLVM_DYLIB=${LLVM_DYNAMIC_LINK} \
+        -DLLVM_TARGETS_TO_BUILD="$(echo ${LLVM_ARCHS[@]} | tr ' ' ';')" \
+        -DLLVM_TOOLCHAIN_TOOLS="llvm-addr2line;llvm-ar;llvm-as;llvm-cov;llvm-cvtres;llvm-cxxfilt;llvm-dlltool;llvm-lib;llvm-ml;llvm-nm;llvm-objdump;llvm-objcopy;llvm-pdbutil;llvm-profdata;llvm-ranlib;llvm-rc;llvm-readelf;llvm-readobj;llvm-size;llvm-strings;llvm-strip;llvm-symbolizer;llvm-windres" \
+        -DLLVM_USE_LINKER=lld \
+        -DLLDB_ENABLE_PYTHON=OFF \
+        ${CMAKE_PARAMETERS} \
+        ..
+    ninja -j ${BUILD_JOBS} install/strip
+    cd ${WRKDIR}
+}
+
+# This function downloads LLVM from VCS
+llvm_fetch()
+{
+    if [ ! -d ${LLVMDIR} ]; then
+        echo ">>> Downloading LLVM ..."
+        git clone --depth 1 --branch ${LLVMTAG} ${LLVMVCS} ${LLVMDIR}
+        cd ${LLVMDIR}
+        apply_patches ${LLVMDIR##*/} ${LLVMTAG##*-}
+        cd ${WRKDIR}
+    fi
+}
+
+# This function compiles and installs NINJA
+ninja_build()
+{
+    local EXTENSION=""
+    local NINJA_CXX_COMPILER=""
+    local NINJA_PLATFORM=""
+
+    # Clean old build if necessary
+    [ "${CLEAN_BUILD}" -eq 1 ] && rm -rf ${NINJADIR}/build-${SYSTEM_NAME}
+
+    # Additional, target-specific configuration options
+    case "${SYSTEM_NAME}" in
+        Windows)
+            EXTENSION=".exe"
+            NINJA_CXX_COMPILER="${SYSTEM_HOST}-g++"
+            NINJA_PLATFORM="mingw"
+            ;;
+        *)
+            NINJA_CXX_COMPILER="clang++"
+            NINJA_PLATFORM="linux"
+            ;;
+    esac
+
+    # Build Ninja
+    echo ">>> Building NINJA ..."
+    mkdir -p ${NINJADIR}/build-${SYSTEM_NAME}
+    cd ${NINJADIR}/build-${SYSTEM_NAME}
+    CXX=${NINJA_CXX_COMPILER} ../configure.py --platform=${NINJA_PLATFORM}
+    ninja -j ${BUILD_JOBS}
+    install ninja${EXTENSION} ${BINDIR}/bin/
+    cd ${WRKDIR}
+}
+
+# This function downloads NINJA from VCS
+ninja_fetch()
+{
+    if [ ! -d ${NINJADIR} ]; then
+        echo ">>> Downloading NINJA ..."
+        git clone --depth 1 --branch ${NINJATAG} ${NINJAVCS} ${NINJADIR}
+        cd ${NINJADIR}
+        apply_patches ${NINJADIR##*/} ${NINJATAG}
+        cd ${WRKDIR}
+    fi
+}
+
+# Performs requirements check and prepares environment
+prepare_environment()
+{
+    # Verify that the number of build jobs is a positive integer
+    if [ -z "${BUILD_JOBS##*[!0-9]*}" ]; then
+        echo "ERROR: Invalid number of jobs provided. Please enter a positive integer."
+        exit 1
+    fi
+
+    # Verify that all required tools are installed
+    for APP in {clang,clang++,cmake,lld,ninja,x86_64-w64-mingw32-windres}; do
+        which ${APP} &> /dev/null
+        if [ $? -ne 0 ]; then
+            echo "ERROR: ${APP} not found. Please install the required tool."
+            exit 2
+        fi
+    done
+
+    # Set target-specific options
+    case "${TARGET_SYSTEM}" in
+        windows|*-mingw32)
+            SYSTEM_NAME="Windows"
+            SYSTEM_HOST="x86_64-w64-mingw32"
+            ;;
+        linux|*-linux-*)
+            SYSTEM_NAME="Linux"
+            ;;
+        *)
+            echo "ERROR: Invalid target system specified. Please choose a valid target system."
+            exit 3
+            ;;
+    esac
+}
+
+# Prints usage help
+print_usage()
+{
+    echo "USAGE: ${0} [--clean] [--enable-llvm-assembly] [--jobs=N] [--minimal] [--static-llvm] [--target={linux,windows}]"
+    exit 1
+}
+
+# This function compiles and install WINE tools
+wine_build()
+{
+    local CONFIGURE_PARAMETERS=""
+    local EXTENSION=""
+
+    # Clean old build if necessary
+    [ "${CLEAN_BUILD}" -eq 1 ] && rm -rf ${WINEDIR}/{build-${SYSTEM_NAME},build-tools}
+
+    # Additional, target-specific configuration options
+    case "${SYSTEM_NAME}" in
+        Windows)
+            CONFIGURE_PARAMETERS="${CONFIGURE_PARAMETERS} --host=${SYSTEM_HOST}"
+            EXTENSION=".exe"
+            ;;
+    esac
+
+    # Build Wine (first configuration builds makedep)
+    echo ">>> Building Wine ..."
+    mkdir -p ${WINEDIR}/{build-${SYSTEM_NAME},build-tools}
+    cd ${WINEDIR}/build-tools
+    ../configure \
+        --enable-win64 \
+        --without-freetype \
+        --without-x
+    cd ${WINEDIR}/build-${SYSTEM_NAME}
+    ../configure \
+        --enable-tools \
+        --enable-win64 \
+        --with-wine-tools=${WINEDIR}/build-tools \
+        --without-freetype \
+        --without-x \
+        ${CONFIGURE_PARAMETERS}
+    for TOOL in widl wmc wrc; do
+        make -j ${BUILD_JOBS} tools/${TOOL}/all
+        cp tools/${TOOL}/${TOOL}${EXTENSION} ${BINDIR}/bin/
+    done
+    cd ${WRKDIR}
+}
+
+# This function downloads WINE from VCS
+wine_fetch()
+{
+    if [ ! -d ${WINEDIR} ]; then
+        echo ">>> Downloading WINE ..."
+        git clone --depth 1 --branch ${WINETAG} ${WINEVCS} ${WINEDIR}
+        cd ${WINEDIR}
+        apply_patches ${WINEDIR##*/} ${WINETAG##*-}
+        cd ${WRKDIR}
+    fi
+}
+
+# This function installs XTCHAIN tools and scripts
+xtchain_build()
+{
+    # Target-specific configuration options
+    case "${SYSTEM_NAME}" in
+        Windows)
+            CCOMPILER="${SYSTEM_HOST}-gcc"
+            ;;
+        *)
+            CCOMPILER="clang"
+    esac
+
+    # Build XTchain tools
+    echo ">>> Building XTchain tools ..."
+    mkdir -p ${BINDIR}/bin
+    mkdir -p ${BINDIR}/lib/xtchain
+    for EXEC in bin2c exetool xtcspecc; do
+        if [ ! -e ${BINDIR}/bin/${EXEC} ]; then
+            ${CCOMPILER} ${WRKDIR}/tools/${EXEC}.c -o ${BINDIR}/bin/${EXEC}
+        fi
+    done
+    cp ${WRKDIR}/scripts/xtclib* ${BINDIR}/lib/xtchain/
+    cp ${WRKDIR}/scripts/xtchain* ${BINDIR}/
+}
+
+# This function generates XTCHAIN version file and produces tarball archive
+xtchain_tarball()
+{
+    local EXTENSION=""
+    local LIBDIR=""
+
+    # Additional, target-specific configuration options
+    case "${SYSTEM_NAME}" in
+        Windows)
+            EXTENSION=".exe"
+            ;;
+    esac
+
+    # Remove unneeded files to save disk space
+    echo ">>> Removing unneeded files to save disk space ..."
+    rm -rf ${BINDIR}/{doc,include,share/{bash-completion,emacs,info,locale,man,vim}}
+    for EXEC in amdgpu-arch clang-check clang-exdef-mapping clang-import-test clang-offload-* clang-rename clang-scan-deps diagtool hmaptool ld64.lld modularize nxptx-arch wasm-ld; do
+        rm -f ${BINDIR}/bin/${EXEC}${EXTENSION}
+    done
+
+    # Generate version file
+    cd ${WRKDIR}
+    : ${XTCVER:=$(git describe --exact-match --tags 2>/dev/null)}
+    : ${XTCVER:=DEVEL}
+    [ ${BUILD_MINIMAL} -eq 1 ] && XTCVER="${XTCVER}-lite"
+    echo "${XTCVER}" > ${BINDIR}/Version
+
+    # Windows target specific actions
+    if [ "${SYSTEM_NAME}" == "Windows" ]; then
+        # Replace symlinks with original files
+        for LINK in $(find ${BINDIR}/bin -maxdepth 1 -type l); do
+            cp -f --remove-destination $(readlink -e ${LINK}) ${LINK}
+        done
+
+        # Copy dynamic libraries
+        if [ ${BUILD_MINIMAL} -eq 0 ]; then
+            LIBDIR="$(dirname $(readlink -f $(command -v ${SYSTEM_HOST}-windres)))/../${SYSTEM_HOST}"
+            for DLL in $(${SYSTEM_HOST}-objdump --private-headers ${BINDIR}/bin/cmake.exe | grep "DLL Name:" | cut -d' ' -f3 | grep "lib.*.dll"); do
+                find ${LIBDIR} -type f -name ${DLL} -exec cp {} ${BINDIR}/bin \;
+            done
+        fi
+    fi
+
+    # Build tarball
+    echo ">>> Creating toolchain archive ..."
+    tar -I 'zstd -19' -cpf xtchain-${XTCVER}-${TARGET_SYSTEM}.tar.zst -C ${BINDIR} .
+}
+
+
+
+# Parse all arguments provided to the script
+while [ $# -gt 0 ]; do
+    case "$1" in
+        --clean)
+            # Performs clean build
+            CLEAN_BUILD=1
+            ;;
+        --enable-llvm-assembly)
+            # Enables LLVM asembly files compilation (like BLAKE3)
+            ENABLE_LLVM_ASSEMBLY=1
+            ;;
+        --jobs=*)
+            # Sets number of CPU cores used for compilation
+            BUILD_JOBS="${1#*=}"
+            ;;
+        --minimal)
+            BUILD_MINIMAL=1
+            ;;
+        --static-llvm)
+            # Compiles LLVM statically
+            LLVM_DYNAMIC_LINK=OFF
+            ;;
+        --target=*)
+            # Sets the target system for built toolchain (Linux or Windows)
+            TARGET_SYSTEM="${1#*=}"
+            ;;
+        *)
+            # Prints help if any other parameter given
+            print_usage
+            ;;
+    esac
+    shift
+done
+
+# Prepare environment
+prepare_environment
+
+# Exit immediately on any failure
+set -e
+
+# Check number of CPU cores available
+if [ ${BUILD_JOBS} -eq 0 ]; then
+    unset BUILD_JOBS
+    : ${BUILD_JOBS:=$(sysctl -n hw.ncpu 2>/dev/null)}
+    : ${BUILD_JOBS:=$(nproc 2>/dev/null)}
+    : ${BUILD_JOBS:=1}
+fi
+
+# Create working directories
+mkdir -p ${BINDIR}
+mkdir -p ${SRCDIR}
+
+# Build XTchain tools
+xtchain_build
+
+# Download and build Wine tools
+wine_fetch
+wine_build
+
+if [ ${BUILD_MINIMAL} -eq 0 ]; then
+    # Download and build LLVM
+    llvm_fetch
+    llvm_build
+
+    # Download and build CMake
+    cmake_fetch
+    cmake_build
+
+    # Download and build Ninja
+    ninja_fetch
+    ninja_build
+fi
+
+# Generate tarball archive
+xtchain_tarball

patches/binutils/2_35/001-add-coffpe-xt-support.patch

@@ -1,126 +0,0 @@
-diff --git a/bfd/peXXigen.c b/bfd/peXXigen.c
-index 5149ef582b..f09e4b7382 100644
---- a/bfd/peXXigen.c
-+++ b/bfd/peXXigen.c
-@@ -2952,6 +2952,25 @@ _bfd_XX_print_private_bfd_data_common (bfd * abfd, void * vfile)
-     case IMAGE_SUBSYSTEM_XBOX:
-       subsystem_name = "XBOX";
-       break;
-+    /* These are the XT specific subsystems */
-+    case IMAGE_SUBSYSTEM_XT_DRIVER:
-+      subsystem_name = "XT driver";
-+      break;
-+    case IMAGE_SUBSYSTEM_XT_NATIVE:
-+      subsystem_name = "XT native";
-+      break;
-+    case IMAGE_SUBSYSTEM_XT_GDIAPP:
-+      subsystem_name = "XT GDI application";
-+      break;
-+    case IMAGE_SUBSYSTEM_XT_CLIAPP:
-+      subsystem_name = "XT CLI application";
-+      break;
-+    case IMAGE_SUBSYSTEM_XT_PSXAPP:
-+      subsystem_name = "XT PSX application";
-+      break;
-+    case IMAGE_SUBSYSTEM_XT_DYNLIB:
-+      subsystem_name = "XT dynamic library";
-+      break;
-     /* Added default case for clarity - subsystem_name is NULL anyway.  */
-     default:
-       subsystem_name = NULL;
-diff --git a/binutils/objcopy.c b/binutils/objcopy.c
-index 3866c7f458..55e069831b 100644
---- a/binutils/objcopy.c
-+++ b/binutils/objcopy.c
-@@ -4860,7 +4860,13 @@ set_pe_subsystem (const char *s)
-       { "efi-bsd", 1, IMAGE_SUBSYSTEM_EFI_BOOT_SERVICE_DRIVER },
-       { "efi-rtd", 1, IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER },
-       { "sal-rtd", 1, IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER },
--      { "xbox", 0, IMAGE_SUBSYSTEM_XBOX }
-+      { "xbox", 0, IMAGE_SUBSYSTEM_XBOX },
-+      { "xt-driver", 0, IMAGE_SUBSYSTEM_XT_DRIVER },
-+      { "xt-native", 0, IMAGE_SUBSYSTEM_XT_NATIVE },
-+      { "xt-gdiapp", 0, IMAGE_SUBSYSTEM_XT_GDIAPP },
-+      { "xt-cliapp", 0, IMAGE_SUBSYSTEM_XT_CLIAPP },
-+      { "xt-psxapp", 0, IMAGE_SUBSYSTEM_XT_PSXAPP },
-+      { "xt-dynlib", 0, IMAGE_SUBSYSTEM_XT_DYNLIB }
-     };
-   short value;
-   char *copy;
-diff --git a/include/coff/pe.h b/include/coff/pe.h
-index c83a958eee..deeea6b49a 100644
---- a/include/coff/pe.h
-+++ b/include/coff/pe.h
-@@ -169,6 +169,12 @@
- #define IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER	12
- #define IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER	13
- #define IMAGE_SUBSYSTEM_XBOX			14
-+#define IMAGE_SUBSYSTEM_XT_DRIVER       21
-+#define IMAGE_SUBSYSTEM_XT_NATIVE       22
-+#define IMAGE_SUBSYSTEM_XT_GDIAPP       23
-+#define IMAGE_SUBSYSTEM_XT_CLIAPP       24
-+#define IMAGE_SUBSYSTEM_XT_PSXAPP       25
-+#define IMAGE_SUBSYSTEM_XT_DYNLIB       26
- 
- /* NT allows long filenames, we want to accommodate this.
-    This may break some of the bfd functions.  */
-diff --git a/ld/emultempl/pe.em b/ld/emultempl/pe.em
-index 3899c9d92c..c9277ded20 100644
---- a/ld/emultempl/pe.em
-+++ b/ld/emultempl/pe.em
-@@ -539,6 +539,12 @@ set_entry_point (void)
-       { 7, "__PosixProcessStartup"},
-       { 9, "WinMainCRTStartup" },
-       {14, "mainCRTStartup"    },
-+      {21, "XtDriverStartup"   },
-+      {22, "XtProcessStartup"  },
-+      {23, "XtgMainProcessStartup" },
-+      {24, "XtcMainProcessStartup" },
-+      {25, "XtpMainProcessStartup" },
-+      {26, "XtlMainLibraryStartup" },
-       { 0, NULL          }
-     };
- 
-@@ -606,6 +611,12 @@ set_pe_subsystem (void)
-       { "posix",   7},
-       { "wince",   9},
-       { "xbox",   14},
-+      { "xt-driver", 21},
-+      { "xt-native", 22},
-+      { "xt-gdiapp", 23},
-+      { "xt-cliapp", 24},
-+      { "xt-psxapp", 25},
-+      { "xt-dynlib", 26},
-       { NULL, 0 }
-     };
- 
-diff --git a/ld/emultempl/pep.em b/ld/emultempl/pep.em
-index a0a7023e70..001aa34769 100644
---- a/ld/emultempl/pep.em
-+++ b/ld/emultempl/pep.em
-@@ -504,6 +504,12 @@ set_entry_point (void)
-       { 7, "__PosixProcessStartup" },
-       { 9, "WinMainCRTStartup" },
-       {14, "mainCRTStartup"    },
-+      {21, "XtDriverStartup"   },
-+      {22, "XtProcessStartup"  },
-+      {23, "XtgMainProcessStartup" },
-+      {24, "XtcMainProcessStartup" },
-+      {25, "XtpMainProcessStartup" },
-+      {26, "XtlMainLibraryStartup" },
-       { 0, NULL          }
-     };
- 
-@@ -568,6 +573,12 @@ set_pep_subsystem (void)
-       { "posix",   7 },
-       { "wince",   9 },
-       { "xbox",   14 },
-+      { "xt-driver", 21},
-+      { "xt-native", 22},
-+      { "xt-gdiapp", 23},
-+      { "xt-cliapp", 24},
-+      { "xt-psxapp", 25},
-+      { "xt-dynlib", 26},
-       { NULL, 0 }
-     };
- 

patches/binutils/2_35/002-enable-gold-on-mingw32.patch

@@ -1,36 +0,0 @@
-Though GOLD is not yet enabled for TDM-GCC, this patch will help
-
-From: J.M. Eubank <john@thesnappy.net>
-
-From
-   <https://github.com/msys2/MINGW-packages/blob/master/mingw-w64-binutils/0001-enable-gold-on.mingw32.patch>
----
- 0 files changed
-
-diff --git a/configure b/configure
-index 6a9719f6..f07a3b7f 100755
---- a/configure
-+++ b/configure
-@@ -3001,6 +3001,7 @@ case "${ENABLE_GOLD}" in
-   yes|default)
-     # Check for ELF target.
-     is_elf=no
-+    is_pe=no
-     case "${target}" in
-       *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
-       | *-*-linux* | *-*-gnu* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
-@@ -3012,10 +3013,12 @@ case "${ENABLE_GOLD}" in
-           *)
-             is_elf=yes
-             ;;
--        esac
-+        esac;;
-+      *-*-mingw*)
-+        is_pe=yes;;
-     esac
- 
--    if test "$is_elf" = "yes"; then
-+    if test "$is_elf" = "yes" -o "$is_pe" = "yes"; then
-       # Check for target supported by gold.
-       case "${target}" in
-         i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* \

patches/gcc/10.2.0/001-make-gcc-relocatable.patch

@@ -1,57 +0,0 @@
-Make GCC fully relocatable, not searching any fixed paths
-
-From: J.M. Eubank <john@thesnappy.net>
-
-that aren't relative to the current installation path
-
-# HG changeset patch
-# Parent 2a1167ee4ed20c6ff3558a104218585837e9963f
----
- 0 files changed
-
-diff --git a/gcc/config/i386/mingw32.h b/gcc/config/i386/mingw32.h
-index 086c0e460..f0ceca42b 100644
---- a/gcc/config/i386/mingw32.h
-+++ b/gcc/config/i386/mingw32.h
-@@ -78,7 +78,7 @@ along with GCC; see the file COPYING3.  If not see
- #endif
- 
- #undef NATIVE_SYSTEM_HEADER_COMPONENT
--#define NATIVE_SYSTEM_HEADER_COMPONENT "MINGW"
-+#undef NATIVE_SYSTEM_HEADER_DIR
- 
- #undef CPP_SPEC
- #define CPP_SPEC "%{posix:-D_POSIX_SOURCE} %{mthreads:-D_MT} " \
-@@ -183,17 +183,12 @@ along with GCC; see the file COPYING3.  If not see
- 
- /* Override startfile prefix defaults.  */
- #ifndef STANDARD_STARTFILE_PREFIX_1
--#define STANDARD_STARTFILE_PREFIX_1 "/mingw/lib/"
-+#define STANDARD_STARTFILE_PREFIX_1 ""
- #endif
- #ifndef STANDARD_STARTFILE_PREFIX_2
- #define STANDARD_STARTFILE_PREFIX_2 ""
- #endif
- 
--/* For native mingw-version we need to take care that NATIVE_SYSTEM_HEADER_DIR
--   macro contains POSIX-style path.  See bug 52947.  */
--#undef NATIVE_SYSTEM_HEADER_DIR
--#define NATIVE_SYSTEM_HEADER_DIR "/mingw/include"
--
- /* Output STRING, a string representing a filename, to FILE.
-    We canonicalize it to be in Unix format (backslashes are replaced
-    forward slashes.  */
-diff --git a/gcc/incpath.c b/gcc/incpath.c
-index bcbe20829..c5d4453d8 100644
---- a/gcc/incpath.c
-+++ b/gcc/incpath.c
-@@ -183,8 +183,7 @@ add_standard_paths (const char *sysroot, const char *iprefix,
- 	      str = concat (sysroot_no_trailing_dir_separator, p->fname, NULL);
- 	      free (sysroot_no_trailing_dir_separator);
- 	    }
--	  else if (!p->add_sysroot && relocated
--		   && !filename_ncmp (p->fname, cpp_PREFIX, cpp_PREFIX_len))
-+	  if (relocated && !filename_ncmp (p->fname, cpp_PREFIX, cpp_PREFIX_len))
- 	    {
-  	      static const char *relocated_prefix;
- 	      char *ostr;

patches/llvm/21.1.1/01-Fix-WaitForSingleObject-cast-on-MinGW.patch

@@ -0,0 +1,13 @@
+diff --git a/lldb/source/Host/windows/MainLoopWindows.cpp b/lldb/source/Host/windows/MainLoopWindows.cpp
+index c0b10797e..e971b8cfd 100644
+--- a/lldb/source/Host/windows/MainLoopWindows.cpp
++++ b/lldb/source/Host/windows/MainLoopWindows.cpp
+@@ -58,7 +58,7 @@ public:
+       // Keep trying to cancel ReadFile() until the thread exits.
+       do {
+         CancelIoEx(m_handle, /*lpOverlapped=*/NULL);
+-      } while (WaitForSingleObject(m_monitor_thread.native_handle(), 1) ==
++      } while (WaitForSingleObject((HANDLE)m_monitor_thread.native_handle(), 1) ==
+                WAIT_TIMEOUT);
+       m_monitor_thread.join();
+     }

scripts/xtchain

@@ -6,20 +6,14 @@
 # DEVELOPERS:  Rafal Kupiec <belliash@codingworkshop.eu.org>
 
 
-# Check if script launched as root
-if [ "$(whoami)" = "root" ]; then
-    echo "This script cannot be run as root!"
-    exit 1
-fi
-
 # Get the absolute path to the XTchain
-export XTCDIR="$(realpath $(dirname ${0}))"
+export XTCDIR="$(realpath $(dirname "${0}"))"
 
 # Read the XTchain version
-export XTCVER="$(cat ${XTCDIR}/Version)"
+export XTCVER="$(cat "${XTCDIR}/Version")"
 
 # Load the library
-source ${XTCDIR}/lib/xtchain/xtclib
+source "${XTCDIR}/lib/xtchain/xtclib"
 
 # Set the target architecture
 : ${TARGET:=${1}}
@@ -47,4 +41,4 @@ export PFMAT3="\[\033[0;1;97;104m\]"
 export PFMAT4="\[\033[0;94;49m\]"
 export PFMAT5="\[\033[1;38;5;74m\]"
 export PROMPT="\n${PFMAT1} XT Toolchain ${PFMAT2}${PFMAT3} \w ${PFMAT4}${PFMAT5} "
-bash --rcfile <(echo 'source ~/.bashrc && export PS1="${PROMPT}" && cd ${SRCDIR}')
+bash --rcfile <(echo 'export PS1="${PROMPT}" && cd "${SRCDIR}"')

scripts/xtchain.cmd

@@ -0,0 +1,2 @@
+@echo off
+powershell.exe -ExecutionPolicy Bypass -NoExit -File "%~dp0xtchain.ps1"

scripts/xtchain.ps1

@@ -0,0 +1,156 @@
+#
+# PROJECT:     XTchain
+# LICENSE:     See the COPYING.md in the top level directory
+# FILE:        scripts/xtchain.ps1
+# DESCRIPTION: XTchain Entry Script
+# DEVELOPERS:  Aiken Harris <harraiken91@gmail.com>
+#
+
+[CmdletBinding()]
+param(
+    [Parameter(Position = 0)]
+    [string]$TargetArchitecture = "amd64",
+    
+    [Parameter(Position = 1)]
+    [string]$SourceDirectory = $PWD.Path
+)
+
+# Initialize XTchain environment
+function Initialize-XTChain {
+    [CmdletBinding()]
+    param(
+        [string]$Architecture,
+        [string]$SourcePath
+    )
+    
+    # Get the absolute path to XTchain
+    $script:XTCDIR = (Get-Item -Path ".\").FullName
+    
+    # Read XTchain version
+    $versionFile = Join-Path $script:XTCDIR "Version"
+    if (Test-Path $versionFile) {
+        $env:XTCVER = Get-Content $versionFile -Raw | ForEach-Object { $_.Trim() }
+    } else {
+        Write-Warning "Version file not found at $versionFile"
+        $env:XTCVER = "Unknown"
+    }
+    
+    # Set XTchain directory environment variable
+    $env:XTCDIR = $script:XTCDIR
+    
+    # Import XTchain module
+    $modulePath = Join-Path $script:XTCDIR "lib\xtchain\xtclib.psm1"
+    if (Test-Path $modulePath) {
+        Import-Module $modulePath -Force -Global
+    } else {
+        Write-Error "XTchain module not found at $modulePath"
+        return $false
+    }
+    
+    # Set target architecture
+    $env:TARGET = $Architecture
+    
+    # Validate source directory
+    if (-not (Test-Path $SourcePath)) {
+        Write-Error "Source directory does not exist: $SourcePath"
+        return $false
+    }
+    
+    # Clean compiler environment variables
+    $env:HOST = $null
+    $env:CFLAGS = $null
+    $env:CXXFLAGS = $null
+    $env:LDFLAGS = $null
+    
+    # Update PATH to include XTchain binaries
+    $xtcBinPath = Join-Path $script:XTCDIR "bin"
+    if (Test-Path $xtcBinPath) {
+        $env:PATH = "$xtcBinPath;" + $env:PATH
+    } else {
+        Write-Warning "XTchain bin directory not found at $xtcBinPath"
+    }
+    
+    return $true
+}
+
+# Create fancy PowerLine-style prompt
+function Set-XTChainPrompt {
+    [CmdletBinding()]
+    param()
+    
+    function global:prompt {
+        try {
+            $promptText = " XT Toolchain "
+            $currentPath = (Get-Location).Path
+            $chevron = [char]0xE0B0
+            
+            # Define prompt segments
+            $segments = @(
+                @{ 
+                    Text = $promptText
+                    BackgroundColor = "Blue"
+                    ForegroundColor = "White"
+                },
+                @{ 
+                    Text = " $currentPath "
+                    BackgroundColor = "DarkCyan"
+                    ForegroundColor = "White"
+                }
+            )
+            
+            # Render segments
+            for ($index = 0; $index -lt $segments.Count; $index++) {
+                $segment = $segments[$index]
+                $nextBackground = if ($index + 1 -lt $segments.Count) { 
+                    $segments[$index + 1].BackgroundColor 
+                } else { 
+                    "Default" 
+                }
+                
+                # Write segment text
+                Write-Host $segment.Text -NoNewLine -ForegroundColor $segment.ForegroundColor -BackgroundColor $segment.BackgroundColor
+                
+                # Write separator
+                if ($nextBackground -ne "Default") {
+                    Write-Host $chevron -NoNewLine -ForegroundColor $segment.BackgroundColor -BackgroundColor $nextBackground
+                } else {
+                    Write-Host $chevron -NoNewLine -ForegroundColor $segment.BackgroundColor
+                }
+            }
+            
+            return " "
+        }
+        catch {
+            # Fallback to simple prompt if PowerLine fails
+            return "XTC> "
+        }
+    }
+}
+
+# Main execution
+try {
+    Write-Host "Initializing XTchain environment..." -ForegroundColor Green
+    
+    if (-not (Initialize-XTChain -Architecture $TargetArchitecture -SourcePath $SourceDirectory)) {
+        Write-Error "Failed to initialize XTchain environment"
+        exit 1
+    }
+    
+    # Display version information
+    Show-XTCVersion
+    
+    # Set up the fancy prompt
+    Set-XTChainPrompt
+    
+    # Change to source directory
+    Set-Location -Path $SourceDirectory
+    
+    Write-Host "XTchain environment ready!" -ForegroundColor Green
+    Write-Host "Current directory: $(Get-Location)" -ForegroundColor Cyan
+    Write-Host "Target architecture: $env:TARGET" -ForegroundColor Cyan
+    Write-Host "Type 'Show-XTCHelp' or 'help' for available commands" -ForegroundColor Yellow
+}
+catch {
+    Write-Error "Failed to initialize XTchain: $_"
+    exit 1
+}

scripts/xtclib

@@ -4,8 +4,20 @@
 # FILE:        scripts/xtclib
 # DESCRIPTION: XTchain library
 # DEVELOPERS:  Rafal Kupiec <belliash@codingworkshop.eu.org>
+#              Aiken Harris <harraiken91@gmail.com>
 
 
+# Prints XTChain banner
+banner()
+{
+    local XTC_BANNER="XT Toolchain v${XTCVER} for Linux"
+
+    printf "###############################################################################\n\n"
+    printf "\033[33m%*s\033[00m\n\n" $(( (${#XTC_BANNER} + 80) / 2)) "${XTC_BANNER}"
+    printf "###############################################################################\n\n"
+}
+export -f banner
+
 # Sets the target architecture
 charch()
 {
@@ -14,8 +26,14 @@ charch()
         return
     fi
     case ${1} in
+        "aarch64"|"arm64")
+            export TARGET="aarch64"
+            ;;
+        "arm"|"armv7")
+            export TARGET="armv7"
+            ;;
         "i386"|"i486"|"i586"|"i686"|"x86")
-            export TARGET="i386"
+            export TARGET="i686"
             ;;
         "amd64"|"x64"|"x86_64")
             export TARGET="amd64"
@@ -27,23 +45,87 @@ charch()
 }
 export -f charch
 
+# Sets the build type
+chbuild()
+{
+    if [ "x${1}" == "x" ]; then
+        echo "Syntax: chbuild [DEBUG|RELEASE]"
+        return
+    fi
+    case ${1} in
+        [Rr][Ee][Ll][Ee][Aa][Ss][Ee])
+            export BUILD_TYPE="RELEASE"
+            ;;
+        *)
+            export BUILD_TYPE="DEBUG"
+    esac
+    echo "Target build type: ${BUILD_TYPE}"
+}
+export -f chbuild
+
+# Prints help
+help()
+{
+    banner
+    echo "XTChain defines an internal list of commands:"
+    echo " * banner          - prints XTChain banner"
+    echo " * charch [arch]   - sets the target CPU architecture [aarch64/armv7/i686/amd64]"
+    echo " * chbuild [type]  - sets build type [debug/release]"
+    echo " * help            - prints this message"
+    echo " * version         - prints XTChain and its components version"
+    echo " * xbuild          - builds an application with a Ninja build system"
+}
+export -f help
+
 # Displays version banner
 version()
 {
-    echo "###############################################################################"
-    echo "#                        XT Toolchain v${XTCVER} for Linux                          #"
-    echo "#               by Rafal Kupiec <belliash@codingworkshop.eu.org>              #"
-    echo "###############################################################################"
-    echo
-    echo
-    echo "Binutils Version: $(${XTCDIR}/bin/i686-w64-mingw32-ld -v | cut -d' ' -f5)"
-    echo "GCC Version: $(${XTCDIR}/bin/i686-w64-mingw32-gcc -v 2>&1| grep 'gcc version' | cut -d' ' -f3)"
-    echo "IDL Compiler Version: $(${XTCDIR}/bin/i686-w64-mingw32-widl -V | grep 'version' | cut -d' ' -f5)"
-    echo "Wine Message Compiler Version: $(${XTCDIR}/bin/wmc -V | grep 'version' | cut -d' ' -f5)"
-    echo "Wine Resource Compiler Version: $(${XTCDIR}/bin/wrc --version | grep 'version' | cut -d' ' -f5)"
-    echo
-    charch ${TARGET}
-    echo
-    echo
+    local XTCHAIN_EXTTOOLS=false
+
+    if [ ! -f "${XTCDIR}/bin/clang" ] || [ "$(which clang)" != "${XTCDIR}/bin/clang" ] || [ $(echo ${XTCVER} | grep "min") ]; then
+        XTCHAIN_EXTTOOLS=true
+        for TOOL in {clang,clang++,cmake,lld-link,ninja}; do
+            which ${TOOL} &> /dev/null
+            if [ $? -ne 0 ]; then
+                echo "ERROR: You are using minimal version of XTChain and '${TOOL}' has been not found in your system!"
+                echo "ERROR: Please install all required tools."
+                exit 1
+            fi
+        done
+    fi
+
+    banner
+    echo -en "\nLLVM/Clang Compiler: $(clang --version | grep 'clang version' | cut -d' ' -f3) ($(which clang))"
+    echo -en "\nLLVM/LLD Linker: $(lld-link --version | cut -d' ' -f2) ($(which lld-link))"
+    echo -en "\nWine IDL Compiler: $(widl -V | grep 'version' | cut -d' ' -f5) ($(which widl))"
+    echo -en "\nWine Message Compiler: $(wmc -V | grep 'version' | cut -d' ' -f5) ($(which wmc))"
+    echo -en "\nWine Resource Compiler: $(wrc --version | grep 'version' | cut -d' ' -f5) ($(which wrc))"
+    echo -en "\nXT SPEC Compiler: $(xtcspecc --help | grep Version | cut -d' ' -f5) ($(which xtcspecc))"
+    echo -en "\nCMake Build System: $(cmake --version | grep 'cmake version' | cut -d' ' -f3) ($(which cmake))"
+    echo -en "\nNinja Build System: $(ninja --version) ($(which ninja))"
+    echo -en "\n\n"
+
+    charch ${TARGET:-amd64}
+    chbuild ${BUILD_TYPE:-DEBUG}
+
+    echo -en "\n\nFor a list of all supported commands, type 'help'"
+    echo -en "\n-------------------------------------------------\n\n\n"
 }
 export -f version
+
+# Builds application (wrapper to Ninja)
+xbuild()
+{
+        if [ ! -f build.arch ]; then
+                ninja "$@"
+        else
+                ARCH=$(cat build.arch)
+                if [ x"${ARCH}" != x"${TARGET}" ]; then
+                        echo "Build is configured for '${ARCH}' while current target set to '${TARGET}'!"
+                        echo "Cannot continue until conflict is resolved ..."
+                        return 1
+                fi
+                ninja "$@"
+        fi
+}
+export -f xbuild

scripts/xtclib.psm1

@@ -0,0 +1,248 @@
+#
+# MODULE:      XTchain
+# LICENSE:     See the COPYING.md in the top level directory
+# FILE:        xtclib.psm1
+# DESCRIPTION: XTchain PowerShell module
+# DEVELOPERS:  Aiken Harris <harraiken91@gmail.com>
+#
+
+# Module variables
+$script:XTCVersion = $env:XTCVER
+$script:XTCDirectory = $env:XTCDIR
+
+<#
+.SYNOPSIS
+    Prints XTChain banner
+.DESCRIPTION
+    Displays the XTChain version banner with formatting
+#>
+function Show-XTCBanner {
+    [CmdletBinding()]
+    param()
+    
+    $XTC_BANNER = "XT Toolchain v$script:XTCVersion for Windows"
+
+    Write-Host "################################################################################"
+    Write-Host
+    Write-Host (' ' * [math]::Floor((80 - $XTC_BANNER.Length) / 2) + $XTC_BANNER) -ForegroundColor Yellow
+    Write-Host
+    Write-Host "################################################################################"
+    Write-Host
+}
+
+<#
+.SYNOPSIS
+    Sets the target architecture
+.DESCRIPTION
+    Configures the TARGET environment variable based on the specified architecture
+.PARAMETER Architecture
+    The target architecture (aarch64, arm64, arm, armv7, i386, i486, i586, i686, x86, amd64, x64, x86_64)
+#>
+function Set-XTCArchitecture {
+    [CmdletBinding()]
+    param (
+        [Parameter(Mandatory = $true)]
+        [string]$Architecture
+    )
+
+    switch -Regex ($Architecture.ToLower()) {
+        "aarch64|arm64" {
+            $env:TARGET = "aarch64"
+        }
+        "arm|armv7" {
+            $env:TARGET = "armv7"
+        }
+        "i386|i486|i586|i686|x86" {
+            $env:TARGET = "i686"
+        }
+        "amd64|x64|x86_64" {
+            $env:TARGET = "amd64"
+        }
+        default {
+            $env:TARGET = "UNKNOWN"
+            Write-Warning "Unknown architecture '$Architecture'. Set to UNKNOWN."
+        }
+    }
+    Write-Host "Target Architecture: $($env:TARGET)"
+}
+
+<#
+.SYNOPSIS
+    Sets the build type
+.DESCRIPTION
+    Configures the BUILD_TYPE environment variable
+.PARAMETER BuildType
+    The build type (DEBUG or RELEASE)
+#>
+function Set-XTCBuildType {
+    [CmdletBinding()]
+    param (
+        [Parameter(Mandatory = $true)]
+        [ValidateSet("DEBUG", "RELEASE")]
+        [string]$BuildType
+    )
+
+    $env:BUILD_TYPE = $BuildType.ToUpper()
+    Write-Host "Target build type: $($env:BUILD_TYPE)"
+}
+
+<#
+.SYNOPSIS
+    Shows XTChain help information
+.DESCRIPTION
+    Displays available XTChain commands and their usage
+#>
+function Show-XTCHelp {
+    [CmdletBinding()]
+    param()
+    
+    Show-XTCBanner
+    Write-Host "XTChain PowerShell Module Commands:"
+    Write-Host " * Show-XTCBanner           - prints XTChain banner"
+    Write-Host " * Set-XTCArchitecture      - sets the target CPU architecture"
+    Write-Host " * Set-XTCBuildType         - sets build type [DEBUG/RELEASE]"
+    Write-Host " * Show-XTCHelp             - prints this message"
+    Write-Host " * Show-XTCVersion          - prints XTChain and its components version"
+    Write-Host " * Invoke-XTCBuild          - builds an application with Ninja build system"
+    Write-Host
+    Write-Host "Legacy command aliases:"
+    Write-Host " * banner, charch, chbuild, help, version, xbuild"
+}
+
+<#
+.SYNOPSIS
+    Displays version information for XTChain components
+.DESCRIPTION
+    Shows version information for all XTChain tools and components
+#>
+function Show-XTCVersion {
+    [CmdletBinding()]
+    param()
+
+    # Check for minimal XTChain version with external tools
+    $XTCHAIN_EXTTOOLS = $false
+    if ((Test-Path "$script:XTCDirectory/bin/clang") -and 
+        ((Get-Command clang -ErrorAction SilentlyContinue).Source -eq "$script:XTCDirectory/bin/clang") -and
+        ($script:XTCVersion -match "min")) {
+        
+        $XTCHAIN_EXTTOOLS = $true
+        $requiredTools = @("clang", "clang++", "cmake", "lld-link", "ninja")
+        
+        foreach ($tool in $requiredTools) {
+            if (!(Get-Command $tool -ErrorAction SilentlyContinue)) {
+                Write-Error "You are using minimal version of XTChain and '$tool' has been not found in your system!"
+                Write-Error "Please install all required tools."
+                return
+            }
+        }
+    }
+
+    Show-XTCBanner
+    Write-Host
+
+    # Display tool versions
+    try {
+        $clangVersion = (clang --version | Select-String -Pattern "version (\d+\.\d+\.\d+)").Matches.Groups[1].Value
+        $clangPath = (Get-Command clang).Source
+        Write-Host "LLVM/Clang Compiler: $clangVersion ($clangPath)"
+    } catch { Write-Warning "Could not retrieve Clang version" }
+
+    try {
+        $lldVersion = (lld-link --version | Select-String -Pattern "(\d+\.\d+\.\d+)").Matches.Groups[1].Value
+        $lldPath = (Get-Command lld-link).Source
+        Write-Host "LLVM/LLD Linker: $lldVersion ($lldPath)"
+    } catch { Write-Warning "Could not retrieve LLD version" }
+
+    try {
+        $widlVersion = (widl -V | Select-String -Pattern "version (\d+\.\d+)").Matches.Groups[1].Value
+        $widlPath = (Get-Command widl).Source
+        Write-Host "Wine IDL Compiler: $widlVersion ($widlPath)"
+    } catch { Write-Warning "Could not retrieve WIDL version" }
+
+    try {
+        $wmcVersion = (wmc -V | Select-String -Pattern "version (\d+\.\d+)").Matches.Groups[1].Value
+        $wmcPath = (Get-Command wmc).Source
+        Write-Host "Wine Message Compiler: $wmcVersion ($wmcPath)"
+    } catch { Write-Warning "Could not retrieve WMC version" }
+
+    try {
+        $wrcVersion = (wrc --version | Select-String -Pattern "version (\d+\.\d+)").Matches.Groups[1].Value
+        $wrcPath = (Get-Command wrc).Source
+        Write-Host "Wine Resource Compiler: $wrcVersion ($wrcPath)"
+    } catch { Write-Warning "Could not retrieve WRC version" }
+
+    try {
+        $xtcspeccVersion = (xtcspecc --help | Select-String -Pattern "Version (\d+\.\d+)").Matches.Groups[1].Value
+        $xtcspeccPath = (Get-Command xtcspecc).Source
+        Write-Host "XT SPEC Compiler: $xtcspeccVersion ($xtcspeccPath)"
+    } catch { Write-Warning "Could not retrieve XTCSPECC version" }
+
+    try {
+        $cmakeVersion = (cmake --version | Select-String -Pattern "version (\d+\.\d+\.\d+)").Matches.Groups[1].Value
+        $cmakePath = (Get-Command cmake).Source
+        Write-Host "CMake Build System: $cmakeVersion ($cmakePath)"
+    } catch { Write-Warning "Could not retrieve CMake version" }
+
+    try {
+        $ninjaVersion = (ninja --version)
+        $ninjaPath = (Get-Command ninja).Source
+        Write-Host "Ninja Build System: $ninjaVersion ($ninjaPath)"
+    } catch { Write-Warning "Could not retrieve Ninja version" }
+
+    Write-Host
+
+    # Set default values and display current configuration
+    $BUILD_TYPE = if ([string]::IsNullOrEmpty($env:BUILD_TYPE)) { 'DEBUG' } else { $env:BUILD_TYPE }
+    $TARGET = if ([string]::IsNullOrEmpty($env:TARGET)) { 'amd64' } else { $env:TARGET }
+    
+    Set-XTCArchitecture -Architecture $TARGET
+    Set-XTCBuildType -BuildType $BUILD_TYPE
+
+    Write-Host
+    Write-Host
+    Write-Host "For a list of all supported commands, type 'Show-XTCHelp' or 'help'"
+    Write-Host "--------------------------------------------------------"
+    Write-Host
+}
+
+<#
+.SYNOPSIS
+    Builds application using Ninja build system
+.DESCRIPTION
+    Wrapper around ninja command with architecture validation
+.PARAMETER Arguments
+    Arguments to pass to ninja
+#>
+function Invoke-XTCBuild {
+    [CmdletBinding()]
+    param (
+        [Parameter(ValueFromRemainingArguments = $true)]
+        [string[]]$Arguments
+    )
+
+    if (Test-Path "build.arch") {
+        $buildArch = Get-Content "build.arch" -Raw
+        $buildArch = $buildArch.Trim()
+        
+        if ($buildArch -ne $env:TARGET) {
+            Write-Host "Build is configured for '$buildArch' while current target set to '$($env:TARGET)'!" -ForegroundColor Red
+            Write-Host "Cannot continue until conflict is resolved..." -ForegroundColor Red
+            return 1
+        }
+    }
+    
+    & ninja @Arguments
+    return $LASTEXITCODE
+}
+
+# Legacy function aliases for backwards compatibility
+Set-Alias -Name banner -Value Show-XTCBanner
+Set-Alias -Name charch -Value Set-XTCArchitecture
+Set-Alias -Name chbuild -Value Set-XTCBuildType
+Set-Alias -Name help -Value Show-XTCHelp
+Set-Alias -Name version -Value Show-XTCVersion
+Set-Alias -Name xbuild -Value Invoke-XTCBuild
+
+# Export functions and aliases
+Export-ModuleMember -Function Show-XTCBanner, Set-XTCArchitecture, Set-XTCBuildType, Show-XTCHelp, Show-XTCVersion, Invoke-XTCBuild
+Export-ModuleMember -Alias banner, charch, chbuild, help, version, xbuild

tools/bin2c.c

@@ -0,0 +1,74 @@
+/**
+ * PROJECT:     XTchain
+ * LICENSE:     See COPYING.md in the top level directory
+ * FILE:        tools/bin2c.c
+ * DESCRIPTION: Binary to C converter
+ * DEVELOPERS:  Rafal Kupiec <belliash@codingworkshop.eu.org>
+ */
+
+#include "xtchain.h"
+
+int main(int argc, char *argv[])
+{
+    /* Check for proper number of arguments */
+    if(argc != 4)
+    {
+        printf("Usage: %s <input binary> <output file> <structure name>\n", argv[0]);
+        return 1;
+    }
+
+    /* Open the input binary file in binary mode */
+    FILE *inputFile = fopen(argv[1], "rb");
+    if(inputFile == NULL)
+    {
+        printf("Error: unable to open file %s\n", argv[1]);
+        return 1;
+    }
+
+    /* Open the destination source code file in text mode */
+    FILE *outputFile = fopen(argv[2], "w");
+    if(outputFile == NULL)
+    {
+        printf("Error: unable to open file %s\n", argv[2]);
+        fclose(inputFile);
+        return 1;
+    }
+
+    /* Get the size of the binary file */
+    fseek(inputFile, 0, SEEK_END);
+    long binSize = ftell(inputFile);
+    rewind(inputFile);
+
+    /* Allocate memory for the binary data */
+    unsigned char *binData = (unsigned char *)malloc(binSize);
+    if(binData == NULL)
+    {
+        printf("Error: unable to allocate memory for binary data\n");
+        fclose(inputFile);
+        fclose(outputFile);
+        return 1;
+    }
+
+    /* Read the binary data into memory */
+    fread(binData, sizeof(unsigned char), binSize, inputFile);
+
+    /* Write the C structure to the header file */
+    fprintf(outputFile, "unsigned char %s[] = {", argv[3]);
+    for(int i = 0; i < binSize; i++)
+    {
+        fprintf(outputFile, "0x%02X", binData[i]);
+        if(i < binSize - 1)
+        {
+            fprintf(outputFile, ",");
+        }
+    }
+    fprintf(outputFile, "};\nunsigned int %s_size = %ld;\n", argv[3], binSize);
+    free(binData);
+
+    /* Close all open files */
+    fclose(inputFile);
+    fclose(outputFile);
+
+    printf("Binary data converted to C structure successfully.\n");
+    return 0;
+}

tools/exetool.c

@@ -0,0 +1,182 @@
+/**
+ * PROJECT:     XTchain
+ * LICENSE:     See COPYING.md in the top level directory
+ * FILE:        tools/exetool.c
+ * DESCRIPTION: Portable Executable (PE) utility for changing its signature and subsystem
+ * DEVELOPERS:  Rafal Kupiec <belliash@codingworkshop.eu.org>
+ */
+
+#include "xtchain.h"
+
+typedef struct _PE_SUBSYSTEM
+{
+    int Identifier;
+    char *Name;
+} PE_SUBSYSTEM, *PPE_SUBSYSTEM;
+
+static PE_SUBSYSTEM SubSystems[] = {
+    {0x00, "INVALID_SUBSYSTEM"},
+    {0x01, "NT_NATIVE"},
+    {0x02, "WINDOWS_GUI"},
+    {0x03, "WINDOWS_CLI"},
+    {0x04, "WINDOWS_CE_OLD"},
+    {0x05, "OS2_CUI"},
+    {0x07, "POSIX_CUI"},
+    {0x08, "NATIVE_WINDOWS"},
+    {0x09, "WINDOWS_CE_GUI"},
+    {0x0A, "EFI_APPLICATION"},
+    {0x0B, "EFI_BOOT_SERVICE_DRIVER"},
+    {0x0C, "EFI_RUNTIME_DRIVER"},
+    {0x0D, "EFI_ROM"},
+    {0x0E, "XBOX"},
+    {0x10, "WINDOWS_BOOT_APPLICATION"},
+    {0x14, "XT_NATIVE_KERNEL"},
+    {0x15, "XT_NATIVE_APPLICATION"},
+    {0x16, "XT_NATIVE_DRIVER"},
+    {0x17, "XT_DYNAMIC_LIBRARY"},
+    {0x18, "XT_APPLICATION_CLI"},
+    {0x19, "XT_APPLICATION_GDI"}
+};
+
+PPE_SUBSYSTEM getSubSystem(char *Name)
+{
+    int Index;
+    int SubSystemsCount;
+    PPE_SUBSYSTEM SubSystem;
+
+    /* Count number of subsystems avaialble */
+    SubSystemsCount = sizeof(SubSystems) / sizeof(PE_SUBSYSTEM);
+
+    /* Find subsystem */
+    for(Index = 0; Index < SubSystemsCount; Index++)
+    {
+        SubSystem = &SubSystems[Index];
+        if(strcasecmp(SubSystem->Name, Name) == 0)
+        {
+            /* Subsystem found, return its ID */
+            return SubSystem;
+        }
+    }
+
+	/* No valid subsystem found */
+    return &SubSystems[0];
+}
+
+char *getSubSystemName(int Identifier)
+{
+    int Index;
+    int SubSystemsCount;
+    PPE_SUBSYSTEM SubSystem;
+
+    /* Count number of subsystems avaialble */
+    SubSystemsCount = sizeof(SubSystems) / sizeof(PE_SUBSYSTEM);
+
+    /* Find subsystem */
+    for(Index = 0; Index < SubSystemsCount; Index++)
+    {
+        SubSystem = &SubSystems[Index];
+        if(SubSystem->Identifier == Identifier)
+        {
+            /* Subsystem found, return its ID */
+            return SubSystem->Name;
+        }
+    }
+
+	/* No valid subsystem found */
+    return SubSystems[0].Name;
+}
+
+int main(int argc, char *argv[])
+{
+    FILE *ExeFile;
+    unsigned char Signature[4];
+    unsigned int HeaderOffset;
+    unsigned int ImageSignature;
+    unsigned short SubSystem;
+    PPE_SUBSYSTEM NewSubSystem;
+
+    /* Check for proper number of arguments */
+    if(argc != 3)
+    {
+        printf("Usage: %s <filename> <new SubSystem>\n", argv[0]);
+        return 1;
+    }
+
+    /* Parse the new SubSystem value from the command line argument */
+    NewSubSystem = getSubSystem(argv[2]);
+    if(NewSubSystem->Identifier == 0)
+    {
+        /* Invalid SubSystem provided */
+        printf("Error: %s is not a valid PE SubSystem\n", argv[2]);
+        return 1;
+    }
+
+    /* Open the EXE file in binary mode */
+    ExeFile = fopen(argv[1], "r+b");
+    if(ExeFile == NULL)
+    {
+        /* Failed to open PE file */
+        printf("ERROR: Unable to open file %s\n", argv[1]);
+        return 2;
+    }
+    
+    /* Verify that the input file has a valid DOS header */
+    fread(Signature, sizeof(unsigned char), 4, ExeFile);
+    if(Signature[0] != 'M' || Signature[1] != 'Z')
+    {
+        /* Invalid DOS header */
+        printf("ERROR: %s is not a valid EXE file\n", argv[1]);
+        fclose(ExeFile);
+        return 3;
+    }
+
+    /* Verify that the input file has a valid PE header */
+    fseek(ExeFile, 0x3C, SEEK_SET);
+    fread(&HeaderOffset, sizeof(unsigned int), 1, ExeFile);
+    fseek(ExeFile, HeaderOffset, SEEK_SET);
+    fread(Signature, sizeof(unsigned char), 4, ExeFile);
+    if((Signature[0] != 'P' || Signature[1] != 'E' || Signature[2] != 0 || Signature[3] != 0) &&
+       (Signature[0] != 'P' || Signature[1] != 'E' || Signature[2] != 'X' || Signature[3] != 'T'))
+    {
+        /* Invalid PE header */
+        printf("Error: %s is not a valid PE file\n", argv[1]);
+        fclose(ExeFile);
+        return 3;
+    }
+
+    /* Check if setting XT subsystem */
+    if(NewSubSystem->Identifier >= 0x14 && NewSubSystem->Identifier <= 0x19)
+    {
+        /* Write PEXT signature */
+        ImageSignature = 0x54584550;
+    }
+    else
+    {
+        /* Write PE00 signature */
+        ImageSignature = 0x00004550;
+    }
+
+    /* Seek back to header offset and write new signature */
+    fseek(ExeFile, HeaderOffset, SEEK_SET);
+    fwrite(&ImageSignature, sizeof(ImageSignature), 1, ExeFile);
+
+    /* Seek to the offset of the SubSystem field in the optional header */
+    fseek(ExeFile, HeaderOffset + 0x5C, SEEK_SET);
+
+    /* Read the current SubSystem value */
+    fread(&SubSystem, sizeof(unsigned short), 1, ExeFile);
+
+    /* Seek back to the SubSystem field in the optional header */
+    fseek(ExeFile, -sizeof(unsigned short), SEEK_CUR);
+
+    /* Write the new SubSystem value */
+    fwrite(&NewSubSystem->Identifier, sizeof(unsigned short), 1, ExeFile);
+
+    /* Close the file */
+    fclose(ExeFile);
+
+    /* Finished successfully */
+    printf("PE SubSystem modified: 0x%02X <%s> to 0x%02X <%s>\n",
+           SubSystem, getSubSystemName(SubSystem), NewSubSystem->Identifier, NewSubSystem->Name);
+    return 0;
+}

tools/xtchain.h

@@ -7,57 +7,13 @@
  *              Rafal Kupiec <belliash@codingworkshop.eu.org>
  */
 
-#ifdef UNICODE
-#define _UNICODE
-#endif
-
-#include <ctype.h>
 #include <stdarg.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-#include <unistd.h>
 
 #define _T(x) x
 
-#ifdef _UNICODE
-#define TS "%ls"
-#else
-#define TS "%s"
-#endif
-
-static
-inline
-int
-_tcsicmp(const char *a,
-         const char *b)
-{
-    while(*a && tolower(*a) == tolower(*b))
-    {
-        a++;
-        b++;
-    }
-
-    return *a - *b;
-}
-
-static
-inline
-char *
-concat(const char *prefix,
-       const char *suffix)
-{
-    int prefixlen = strlen(prefix);
-    int suffixlen = strlen(suffix);
-
-    char *buf = malloc((prefixlen + suffixlen + 1) * sizeof(*buf));
-
-    strcpy(buf, prefix);
-    strcpy(buf + prefixlen, suffix);
-
-    return buf;
-}
-
 static
 inline
 char *
@@ -148,15 +104,3 @@ split_argv(const char *argv0,
         *exe_ptr = exe;
     }
 }
-
-static
-inline
-int
-run_final(const char *executable,
-          const char *const *argv)
-{
-    execvp(executable, (char **) argv);
-    perror(executable);
-
-    return 1;
-}

tools/xtcspecc.c

@@ -49,7 +49,6 @@ enum _ARCH
 };
 
 typedef int (*PFNOUTLINE)(FILE *, EXPORT *);
-int gbMSComp = 0;
 int gbImportLib = 0;
 int gbNotPrivateNoWarn = 0;
 int gbTracing = 0;
@@ -531,20 +530,13 @@ PrintName(FILE *fileDest,
         pcAt = ScanToken(pcName, '@');
         if(pcAt && (pcAt < (pcName + nNameLength)))
         {
-            /* On GCC, we need to remove the leading stdcall underscore */
-            if(!gbMSComp && (pexp->nCallingConvention == CC_STDCALL))
-            {
-                pcName++;
-                nNameLength--;
-            }
-
             /* Print the already decorated function name */
             fprintf(fileDest, "%.*s", nNameLength, pcName);
         }
         else
         {
-            /* Print the prefix, but skip it for (GCC && stdcall) */
-            if(gbMSComp || (pexp->nCallingConvention != CC_STDCALL))
+            /* Print the prefix, but skip it for stdcall */
+            if(pexp->nCallingConvention != CC_STDCALL)
             {
                 fprintf(fileDest, "%c", pexp->nCallingConvention == CC_FASTCALL ? '@' : '_');
             }
@@ -560,10 +552,13 @@ PrintName(FILE *fileDest,
     }
 }
 
-void
-OutputLine_def_MS(FILE *fileDest,
-                  EXPORT *pexp)
+int
+OutputLine_def(FILE *fileDest,
+               EXPORT *pexp)
 {
+    DbgPrint("OutputLine_def: '%.*s'...\n", pexp->strName.len, pexp->strName.buf);
+    fprintf(fileDest, " ");
+
     PrintName(fileDest, pexp, &pexp->strName, 0);
 
     if(gbImportLib)
@@ -610,92 +605,6 @@ OutputLine_def_MS(FILE *fileDest,
         /* Redirect it to the relay-tracing trampoline */
         fprintf(fileDest, "=$relaytrace$%.*s", pexp->strName.len, pexp->strName.buf);
     }
-}
-
-void
-OutputLine_def_GCC(FILE *fileDest,
-                   EXPORT *pexp)
-{
-    int bTracing = 0;
-    /* Print the function name, with decoration for export libs */
-    PrintName(fileDest, pexp, &pexp->strName, gbImportLib);
-    DbgPrint("Generating def line for '%.*s'\n", pexp->strName.len, pexp->strName.buf);
-
-    /* Check if this is a forwarded export */
-    if(pexp->strTarget.buf)
-    {
-        int fIsExternal = !!ScanToken(pexp->strTarget.buf, '.');
-        DbgPrint("Got redirect '%.*s'\n", pexp->strTarget.len, pexp->strTarget.buf);
-
-        /* print the target name, don't decorate if it is external */
-        fprintf(fileDest, "=");
-        PrintName(fileDest, pexp, &pexp->strTarget, !fIsExternal);
-    }
-    else if(((pexp->uFlags & FL_STUB) || (pexp->nCallingConvention == CC_STUB)) &&
-             (pexp->strName.buf[0] == '?'))
-    {
-        /* C++ stubs are forwarded to C stubs */
-        fprintf(fileDest, "=stub_function%d", pexp->nNumber);
-    }
-    else if(gbTracing && ((pexp->uFlags & FL_NORELAY) == 0) &&
-             (pexp->nCallingConvention == CC_STDCALL) &&
-            (pexp->strName.buf[0] != '?'))
-    {
-        /* Redirect it to the relay-tracing trampoline */
-        char buf[256];
-        STRING strTarget;
-        fprintf(fileDest, "=");
-        sprintf(buf, "$relaytrace$%.*s", pexp->strName.len, pexp->strName.buf);
-        strTarget.buf = buf;
-        strTarget.len = pexp->strName.len + 12;
-        PrintName(fileDest, pexp, &strTarget, 1);
-        bTracing = 1;
-    }
-
-    /* Special handling for stdcall and fastcall */
-    if((giArch == ARCH_X86) &&
-        ((pexp->nCallingConvention == CC_STDCALL) ||
-         (pexp->nCallingConvention == CC_FASTCALL)))
-    {
-        /* Is this the import lib? */
-        if(gbImportLib)
-        {
-            /* Is the name in the spec file decorated? */
-            const char* pcDeco = ScanToken(pexp->strName.buf, '@');
-            if(pcDeco && 
-                (pexp->strName.len > 1) &&
-                (pcDeco < pexp->strName.buf + pexp->strName.len))
-            {
-                /* Write the name including the leading @  */
-                fprintf(fileDest, "==%.*s", pexp->strName.len, pexp->strName.buf);
-            }
-        }
-        else if((!pexp->strTarget.buf) && !(bTracing))
-        {
-            /* Write a forwarder to the actual decorated symbol */
-            fprintf(fileDest, "=");
-            PrintName(fileDest, pexp, &pexp->strName, 1);
-        }
-    }
-}
-
-int
-OutputLine_def(FILE *fileDest,
-               EXPORT *pexp)
-{
-    DbgPrint("OutputLine_def: '%.*s'...\n", pexp->strName.len, pexp->strName.buf);
-    fprintf(fileDest, " ");
-
-    if(gbMSComp)
-        OutputLine_def_MS(fileDest, pexp);
-    else
-        OutputLine_def_GCC(fileDest, pexp);
-
-    /* On GCC builds we force ordinals */
-    if((pexp->uFlags & FL_ORDINAL) || (!gbMSComp && !gbImportLib))
-    {
-        fprintf(fileDest, " @%d", pexp->nOrdinal);
-    }
 
     if(pexp->uFlags & FL_NONAME)
     {
@@ -1028,10 +937,6 @@ ParseFile(char* pcStart,
             else if(CompareToken(pc, "-ordinal"))
             {
                 exp.uFlags |= FL_ORDINAL;
-                /* GCC doesn't automatically import by ordinal if an ordinal
-                 * is found in the def file. Force it. */
-                if(gbImportLib && !gbMSComp)
-                    exp.uFlags |= FL_NONAME;
             }
             else if(CompareToken(pc, "-stub"))
             {
@@ -1226,41 +1131,6 @@ ParseFile(char* pcStart,
             Fatal(pszSourceFileName, nLine, pcLine, pc, 0, "Ordinal export without ordinal");
         }
 
-        /*
-         * Check for special handling of OLE exports, only when MSVC
-         * is not used, since otherwise this is handled by MS LINK.EXE.
-         */
-        if(!gbMSComp)
-        {
-            /* Check whether the current export is not PRIVATE, or has an ordinal */
-            int bIsNotPrivate = (!gbNotPrivateNoWarn && /*gbImportLib &&*/ !(exp.uFlags & FL_PRIVATE));
-            int bHasOrdinal = (exp.uFlags & FL_ORDINAL);
-
-            /* Check whether the current export is an OLE export, in case any of these tests pass */
-            if(bIsNotPrivate || bHasOrdinal)
-            {
-                for(i = 0; i < ARRAYSIZE(astrOlePrivateExports); ++i)
-                {
-                    if(strlen(astrOlePrivateExports[i]) == exp.strName.len &&
-                        strncmp(exp.strName.buf, astrOlePrivateExports[i], exp.strName.len) == 0)
-                    {
-                        /* The current export is an OLE export: display the corresponding warning */
-                        if(bIsNotPrivate)
-                        {
-                            fprintf(stderr, "WARNING: %s line %d: Exported symbol '%.*s' should be PRIVATE\n",
-                                    pszSourceFileName, nLine, exp.strName.len, exp.strName.buf);
-                        }
-                        if(bHasOrdinal)
-                        {
-                            fprintf(stderr, "WARNING: %s line %d: exported symbol '%.*s' should not be assigned an ordinal\n",
-                                    pszSourceFileName, nLine, exp.strName.len, exp.strName.buf);
-                        }
-                        break;
-                    }
-                }
-            }
-        }
-
         pexports[*cExports] = exp;
         (*cExports)++;
         gbDebug = 0;
@@ -1329,7 +1199,6 @@ void usage(void)
            "  -n=<name>               name of the dll\n"
            "  -a=<arch>               set architecture to one of: aarch64, armv7, i686, x86_64\n"
            "  --implib                generate a def file for an import library\n"
-           "  --msvc                  MSVC compatibility\n"
            "  --no-private-warnings   suppress warnings about symbols that should be private\n"
            "  --with-tracing          generate wine-like \"+relay\" trace trampolines (needs -s)\n",
            XTCSPECC_VERSION,
@@ -1393,10 +1262,6 @@ int main(int argc,
         {
             gbImportLib = 1;
         }
-        else if(strcasecmp(argv[i], "--msvc") == 0)
-        {
-            gbMSComp = 1;
-        }
         else if(strcasecmp(argv[i], "--no-private-warnings") == 0)
         {
             gbNotPrivateNoWarn = 1;
@@ -1516,15 +1381,6 @@ int main(int argc,
         return -1;
     }
 
-    if(!gbMSComp)
-    {
-        if(ApplyOrdinals(pexports, cExports) < 0)
-        {
-            fprintf(stderr, "error: could not apply ordinals!\n");
-            return -1;
-        }
-    }
-
     if(pszDefFileName)
     {
         /* Open output file */